Effective Refractory Metal Alloy Barrier Layer for High Temperature Microelectronic Device Application

2012 ◽  
Vol 1519 ◽  
Author(s):  
A.V. Adedeji ◽  
M.R. Ross ◽  
N. Hamden ◽  
A.K. Pradhan ◽  
A.C. Ahyi ◽  
...  
Keyword(s):  
Barrier Layer ◽  
Refractory Metal ◽  
Microelectronic Device ◽  
X Ray Diffraction ◽  
Nitrogen Gas ◽  
Force Microscopy ◽  
Atomic Force ◽  
Sputter Deposited ◽  
Refractory Metal Alloy ◽  
And Diffusion

ABSTRACTThe oxidation and diffusion of Molybdenum layer sputter-deposited on 2μm CVD diamond grown on silicon substrate has been studied. The Mo layer was protected by refractory metal silicide barrier layer. The samples were annealed in air ambient at 500°C over 30 hours. The oxidation of the samples was monitored with Rutherford Backscattering Spectroscopy (RBS). The effect of reactive sputtering of refractory silicide target in argon-nitrogen gas mixture (5% nitrogen by flow rate) on the barrier characteristics was investigated. The sheet resistivity of the barrier layer on SiC substrates as a function of annealing time in air at 500°C is reported. The surface structure and morphology of the refractory silicide films was determined with X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM).

Reactive Sputtering Growth and Characterizations of InN Thin Films on Si Substrates

2012 ◽  
Vol 545 ◽  
pp. 290-293
Author(s):  
Maryam Amirhoseiny ◽  
Hassan Zainuriah ◽  
Ng Shashiong ◽  
Mohd Anas Ahmad
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Rf Magnetron Sputtering ◽  
Rf Power ◽  
X Ray Diffraction ◽  
Nitrogen Gas ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force

We have studied the effects of deposition conditions on the crystal structure of InN films deposited on Si substrate. InN thin films have been deposited on Si(100) substrates by reactive radio frequency (RF) magnetron sputtering method with pure In target at room temperature. The nitrogen gas pressure, applied RF power and the distance between target and substrate were 2×10-2 Torr, 60 W and 8 cm, respectively. The effects of the Ar–N2 sputtering gas mixture on the structural properties of the films were investigated by using scanning electron microscope, energy-dispersive X-ray spectroscopy, atomic force microscopy and X-ray diffraction techniques.

COMPARATIVE STUDY OF IONIZED METAL PLASMA Ta, TaN AND MULTISTACKED Ta/TaN STRUCTURE AS DIFFUSION BARRIERS FOR Cu METALLIZATION

2001 ◽  
Vol 08 (05) ◽  
pp. 459-464 ◽  
Author(s):  
C. Y. LI ◽  
LEI HE ◽  
J. J. WU ◽  
Y. QIAN ◽  
L. T. KOH ◽  
...  
Keyword(s):  
X Ray Diffraction ◽  
Rutherford Back Scattering ◽  
X Ray ◽  
Force Microscopy ◽  
Barrier Materials ◽  
Cu Metallization ◽  
Atomic Force ◽  
Metal Plasma ◽  
Back Scattering ◽  
And Diffusion

The properties of the ion-metal-plasma (IMP) deposited Ta, TaN and multistacked Ta/TaN between Cu and SiO 2 have been investigated in the Cu /barrier layer/ SiO 2/ Si structures using four-point probe, atomic force microscopy (AFM), X-ray diffraction (XRD), Rutherford back scattering (RBS), tunneling electron microscopy (TEM) and metal-pulse techniques. It was found that the multistacked Ta/TaN barrier shows the best metallurgical and thermal stability among three of them, and the superior stability is found to result mainly from the nanocrystalline microstructure rather than the density and grain size of the barrier materials. The microstructure, which contains nanocrystalline grain and amorphous-like matrix, can better retard the intermixing and diffusion of Cu, Ta, O and Si atoms, due likely to reduction of grain boundaries that are the main passway for the diffusion of these elements.

Turnover of Texture in low rate Sputter-Deposited Nanocrystalline Molybdenum Films

1997 ◽  
Vol 472 ◽  
Author(s):  
Tilo P. Drüsedau ◽  
Frank Klabunde ◽  
Mirko Lohmann ◽  
Thomas Hempel ◽  
Jurgen Bläsing
Keyword(s):  
Film Thickness ◽  
Fiber Texture ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Sputter Deposited ◽  
20 Nm ◽  
Low Rate ◽  
Erosion Zone

ABSTRACTThe crystallite size and orientation in molybdenum films prepared by magnetron sputtering at a low rate of typical 1 Å/s and a pressure of 0.45 Pa was investigated by X-ray diffraction and texture analysis. The surface topography was studied using atomic force microscopy. Increasing the film thickness from 20 nm to 3 μm, the films show a turnover from a (110) fiber texture to a (211) mosaic-like texture. In the early state of growth (20 nm thickness) the development of dome-like structures on the surface is observed. The number of these structures increases with film thickness, whereas their size is weakly influenced. The effect of texture turnover is reduced by increasing the deposition rate by a factor of six, and it is absent for samples mounted above the center of the magnetron source. The effect of texture turnover is related to the bombardment of the films with high energetic argon neutrals resulting from backscattering at the target under oblique angle and causing resputtering. Due to the narrow angular distribution of the reflected argon, bombardment of the substrate plane is inhomogeneous and only significant for regions close to the erosion zone of the magnetron.

Investigation of the Effect of Uv-Assisted Oxidation and Nitridation of Hafnium Metal Films

2003 ◽  
Vol 780 ◽  
Author(s):  
C. Essary ◽  
V. Craciun ◽  
J. M. Howard ◽  
R. K. Singh
Keyword(s):  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Grazing Angle ◽  
X Ray Diffraction ◽  
Metal Thin Films ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force ◽  
Silicon Interface

AbstractHf metal thin films were deposited on Si substrates using a pulsed laser deposition technique in vacuum and in ammonia ambients. The films were then oxidized at 400 °C in 300 Torr of O2. Half the samples were oxidized in the presence of ultraviolet (UV) radiation from a Hg lamp array. X-ray photoelectron spectroscopy, atomic force microscopy, and grazing angle X-ray diffraction were used to compare the crystallinity, roughness, and composition of the films. It has been found that UV radiation causes roughening of the films and also promotes crystallization at lower temperatures.Furthermore, increased silicon oxidation at the interface was noted with the UVirradiated samples and was shown to be in the form of a mixed layer using angle-resolved X-ray photoelectron spectroscopy. Incorporation of nitrogen into the film reduces the oxidation of the silicon interface.

Low Molecular Weight Microfibers with Light Sensing Properties

2017 ◽  
Vol 54 (4) ◽  
pp. 655-658
Author(s):  
Andrei Bejan ◽  
Dragos Peptanariu ◽  
Bogdan Chiricuta ◽  
Elena Bicu ◽  
Dalila Belei
Keyword(s):  
Molecular Weight ◽  
Low Molecular Weight ◽  
X Ray Diffraction ◽  
Aromatic Rings ◽  
X Ray ◽  
Force Microscopy ◽  
Light Sensing ◽  
Sensing Applications ◽  
Atomic Force ◽  
Low Molecular Weight Compounds

Microfibers were obtained from organic low molecular weight compounds based on heteroaromatic and aromatic rings connected by aliphatic spacers. The obtaining of microfibers was proved by scanning electron microscopy. The deciphering of the mechanism of microfiber formation has been elucidated by X-ray diffraction, infrared spectroscopy, and atomic force microscopy measurements. By exciting with light of different wavelength, florescence microscopy revealed a specific optical response, recommending these materials for light sensing applications.

Structural and Optical Properties of InAsSbBi Grown by Molecular Beam Epitaxy on Offcut GaSb Substrates

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 215
Author(s):  
Rajeev R. Kosireddy ◽  
Stephen T. Schaefer ◽  
Marko S. Milosavljevic ◽  
Shane R. Johnson
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Optical Quality ◽  
X Ray Diffraction ◽  
Interface Quality ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Lateral Variations

Three InAsSbBi samples are grown by molecular beam epitaxy at 400 °C on GaSb substrates with three different offcuts: (100) on-axis, (100) offcut 1° toward [011], and (100) offcut 4° toward [011]. The samples are investigated using X-ray diffraction, Nomarski optical microscopy, atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy. The InAsSbBi layers are 210 nm thick, coherently strained, and show no observable defects. The substrate offcut is not observed to influence the structural and interface quality of the samples. Each sample exhibits small lateral variations in the Bi mole fraction, with the largest variation observed in the on-axis growth. Bismuth rich surface droplet features are observed on all samples. The surface droplets are isotropic on the on-axis sample and elongated along the [011¯] step edges on the 1° and 4° offcut samples. No significant change in optical quality with offcut angle is observed.

scholarly journals Ultrafine metal-polymer catalysts based on polyconjugated systems for Fisher–Tropsch synthesis

2020 ◽  
Vol 92 (6) ◽  
pp. 977-984
Author(s):  
Mayya V. Kulikova ◽  
Albert B. Kulikov ◽  
Alexey E. Kuz’min ◽  
Anton L. Maximov
Keyword(s):  
Tropsch Synthesis ◽  
X Ray Diffraction ◽  
Fischer Tropsch ◽  
Force Microscopy ◽  
Composite Catalysts ◽  
Fe Catalyst ◽  
Atomic Force ◽  
And Function ◽  
Metal Polymer

AbstractFor previously studied Fischer–Tropsch nanosized Fe catalyst slurries, polymer compounds with or without polyconjugating structures are used as precursors to form the catalyst nanomatrix in situ, and several catalytic experiments and X-ray diffraction and atomic force microscopy measurements are performed. The important and different roles of the paraffin molecules in the slurry medium in the formation and function of composite catalysts with the two types of aforementioned polymer matrices are revealed. In the case of the polyconjugated polymers, the alkanes in the medium are “weakly” coordinated with the metal-polymer composites, which does not affect the effectiveness of the polyconjugated polymers. Otherwise, alkane molecules form a “tight” surface layer around the composite particles, which create transport complications for the reagents and products of Fischer-Tropsch synthesis and, in some cases, can change the course of the in situ catalyst formation.

scholarly journals Influence of Growth Temperature of the Nucleation Layer on the Growth of InP on Si (001)

Coatings ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 823
Author(s):  
Shizheng Yang ◽  
Hongliang Lv ◽  
Likun Ai ◽  
Fangkun Tian ◽  
Silu Yan ◽  
...  
Keyword(s):  
Growth Temperature ◽  
Wafer Level ◽  
X Ray Diffraction ◽  
Nucleation Layer ◽  
Force Microscopy ◽  
Gas Source ◽  
Atomic Force ◽  
Growth Method ◽  
Step Growth ◽  
Microscopy Images

InP layers grown on Si (001) were achieved by the two-step growth method using gas source molecular beam epitaxy. The effects of growth temperature of nucleation layer on InP/Si epitaxial growth were investigated systematically. Cross-section morphology, surface morphology and crystal quality were characterized by scanning electron microscope images, atomic force microscopy images, high-resolution X-ray diffraction (XRD), rocking curves and reciprocal space maps. The InP/Si interface and surface became smoother and the XRD peak intensity was stronger with the nucleation layer grown at 350 °C. The Results show that the growth temperature of InP nucleation layer can significantly affect the growth process of InP film, and the optimal temperature of InP nucleation layer is required to realize a high-quality wafer-level InP layers on Si (001).

ANNEALING TIME EFFECT ON NANOSTRUCTURED n-ZnO/p-Si HETEROJUNCTION PHOTODETECTOR PERFORMANCE

2015 ◽  
Vol 22 (02) ◽  
pp. 1550027 ◽  
Author(s):  
NADIR. F. HABUBI ◽  
RAID. A. ISMAIL ◽  
WALID K. HAMOUDI ◽  
HASSAM. R. ABID
Keyword(s):  
Annealing Time ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Zno Nps ◽  
Force Microscopy ◽  
Atomic Force ◽  
Junction Type ◽  
P Type ◽  
Quartz Substrates ◽  
Two Peaks

In this work, n- ZnO /p- Si heterojunction photodetectors were prepared by drop casting of ZnO nanoparticles (NPs) on single crystal p-type silicon substrates, followed by (15–60) min; step-annealing at 600∘C. Structural, electrical, and optical properties of the ZnO NPs films deposited on quartz substrates were studied as a function of annealing time. X-ray diffraction studies showed a polycrystalline, hexagonal wurtizte nanostructured ZnO with preferential orientation along the (100) plane. Atomic force microscopy measurements showed an average ZnO grain size within the range of 75.9 nm–99.9 nm with a corresponding root mean square (RMS) surface roughness between 0.51 nm–2.16 nm. Dark and under illumination current–voltage (I–V) characteristics of the n- ZnO /p- Si heterojunction photodetectors showed an improving rectification ratio and a decreasing saturation current at longer annealing time with an ideality factor of 3 obtained at 60 min annealing time. Capacitance–voltage (C–V) characteristics of heterojunctions were investigated in order to estimate the built-in-voltage and junction type. The photodetectors, fabricated at optimum annealing time, exhibited good linearity characteristics. Maximum sensitivity was obtained when ZnO / Si heterojunctions were annealed at 60 min. Two peaks of response, located at 650 nm and 850 nm, were observed with sensitivities of 0.12–0.19 A/W and 0.18–0.39 A/W, respectively. Detectivity of the photodetectors as function of annealing time was estimated.

Sign in / Sign up

Export Citation Format

Share Document