Synthesis and Determination of Thermodynamical Properties of the Compounds of the system Ca-Mg-Bi

2012 ◽  
Vol 1481 ◽  
pp. 3-9 ◽  
Author(s):  
C. Ramírez ◽  
J. A. Romero ◽  
A. Hernández ◽  
F. Pérez
Keyword(s):  
Inert Atmosphere ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermodynamical Properties ◽  
Iron Aluminum ◽  
Calorimetric Technique ◽  
The World ◽  
Melting Lead ◽  
Lead Production

ABSTRACTBismuth is an element obtained as a sub-product in lead production; Mexico occupies the second position in the world in production of this element. Bismuth is used as iron, aluminum and copper alloying, in the pharmaceutical industry, in the cosmetics industry, etc. Bismuth is separated from lead by the Kroll-Betterton Process in which a Ca-Mg alloy is added to the melting lead to form the intermetallic compounds Ca3Bi2, Mg3Bi2 and Ca2MgBi2 which float to the surface of the bath. Unfortunately, there is little thermodynamical information of the compounds of the system Ca-Mg-Bi which can be used to study and optimize the Kroll-Betterton process in a theoretical way. In this work there were synthesized the compounds Ca3Bi2, Mg3Bi2 and CaMg2Bi2 using powders of pure elements (Ca, Mg and Bi) in the required amounts and melted under an inert atmosphere. After synthesis, the samples were characterized by X-Ray Diffraction to ensure the formation of the desire compounds. Later, calorimetric technique was used to determine the thermodynamical properties of the compounds. The results obtained by X-Ray Diffraction show the formation of Mg3Bi2 and Mg2CaBi2 species; however, there is no crystallographic information of the compound Ca3Bi2. The heating curves obtained by calorimetry show endothermic peaks, due to the presence of phases changes as is indicated in the Ca-Bi, Mg-Bi and Ca-Mg-Bi phases diagrams.

Determination of Total Phosphate and Identification of Acid-Insolubles in Superphosphoric Acid

1969 ◽  
Vol 52 (3) ◽  
pp. 577-581
Author(s):  
A B Carel ◽  
D E Jordan
Keyword(s):  
Quantitative Analysis ◽  
Sample Preparation ◽  
X Ray Diffraction ◽  
Acid Base ◽  
Absorption Data ◽  
Digestion Procedure ◽  
X Ray ◽  
Iron Aluminum ◽  
Insoluble Material

Abstract Discrepancies in the analysis of superphosphoric acid for iron, aluminum, and phosphorus are found to be directly related to the digestion procedure used for sample preparation. Various acid digestions and combined acid-base digestion data are discussed. Chemical and atomic absorption data are combined to confirm the structure of the acid-insoluble material identified by X-ray diffraction analysis. Recommended digestion procedures are included for the quantitative analysis of superphosphoric acid for iron, aluminum, and phosphorus.

Sem and X-Ray Analysis of Renal and Biliary Calculi

1976 ◽  
Vol 34 ◽  
pp. 306-307
Author(s):  
R. J. Narconis ◽  
G. L. Johnson
Keyword(s):  
Chemical Constituents ◽  
Natural State ◽  
X Ray Diffraction ◽  
Chemical Methods ◽  
X Ray ◽  
Additional Dimension ◽  
Biliary Calculi ◽  
Calculus Formation ◽  
Scanning Electron

Analysis of the constituents of renal and biliary calculi may be of help in the management of patients with calculous disease. Several methods of analysis are available for identifying these constituents. Most common are chemical methods, optical crystallography, x-ray diffraction, and infrared spectroscopy. The application of a SEM with x-ray analysis capabilities should be considered as an additional alternative.A scanning electron microscope equipped with an x-ray “mapping” attachment offers an additional dimension in its ability to locate elemental constituents geographically, and thus, provide a clue in determination of possible metabolic etiology in calculus formation. The ability of this method to give an undisturbed view of adjacent layers of elements in their natural state is of advantage in determining the sequence of formation of subsequent layers of chemical constituents.

New Coordination Compounds of Fe(III) with Organic Ligands

2009 ◽  
Vol 59 (12) ◽  
Author(s):  
Mihaela Flondor ◽  
Ioan Rosca ◽  
Doina Sibiescu ◽  
Mihaela-Aurelia Vizitiu ◽  
Daniel-Mircea Sutiman ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Complex Compounds ◽  
Organic Ligands ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Chemical Analysis ◽  
Structural Formulae ◽  
Paramagnetic Properties

In this paper the synthesis and the study of some complex compounds of Fe(III) with ligands derived from: 2-(4-chloro-phenylsulfanyl)-1-(2-hydroxy-3,5-diiodo-phenyl)-ethanone (HL1), 1-(3,5-dibromo-2-hydroxy-phenyl)-2-phenylsulfanyl-ethanone(HL2), and 2-(4-chloro-phenylsulfanyl)-1-(3,5-dibromo-2-hydroxy-phenyl)-ethanone (HL3) is presented. The characterization of these complexes is based on method as: the elemental chemical analysis, IR and ESR spectroscopy, M�ssbauer, the thermogravimetric analysis and X-ray diffraction. Study of the IR and chemical analysis has evidenced that the precipitates form are a complexes and the combination ratio of M:L is 1:2. The central atoms of Fe(III) presented paramagnetic properties and a octaedric hybridization. Starting from this precipitation reactions, a method for the gravimetric determination of Fe(III) with this organic ligands has been possible. Based on the experimental data on literature indications, the structural formulae of the complex compounds are assigned.

Crystal structure determination of the conformation of two bicyclo[3.3.1]nonan-ones

1985 ◽  
Vol 63 (6) ◽  
pp. 1166-1169 ◽  
Author(s):  
John F. Richardson ◽  
Ted S. Sorensen
Keyword(s):  
Crystal Structure ◽  
Direct Methods ◽  
Chair Conformation ◽  
Molecular Structures ◽  
Boat Conformation ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray ◽  
Final Agreement

The molecular structures of exo-7-methylbicyclo[3.3.1]nonan-3-one, 3, and the endo-7-methyl isomer, 4, have been determined using X-ray-diffraction techniques. Compound 3 crystallizes in the space group [Formula: see text] with a = 15.115(1), c = 7.677(2) Å, and Z = 8 while 4 crystallizes in the space group P21 with a = 6.446(1), b = 7.831(1), c = 8.414(2) Å, β = 94.42(2)°, and Z = 2. The structures were solved by direct methods and refined to final agreement factors of R = 0.041 and R = 0.034 for 3 and 4 respectively. Compound 3 exists in a chair–chair conformation and there is no significant flattening of the chair rings. However, in 4, the non-ketone ring is forced into a boat conformation. These results are significant in interpreting what conformations may be present in the related sp2-hybridized carbocations.

scholarly journals First Report on the Geologic Occurrence of Natural Na–A Zeolite and Associated Minerals in Cretaceous Mudstones of the Paja Formation of Vélez (Santander), Colombia

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 218
Author(s):  
Carlos Alberto Ríos-Reyes ◽  
German Alfonso Reyes-Mendoza ◽  
José Antonio Henao-Martínez ◽  
Craig Williams ◽  
Alan Dyer
Keyword(s):  
Natural Zeolite ◽  
Scanning Electron Micrographs ◽  
Total Sulfur ◽  
Zeolite A ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mineral Phases ◽  
The World ◽  
Porosity And Permeability ◽  
First Time

This study reports for the first time the geologic occurrence of natural zeolite A and associated minerals in mudstones from the Cretaceous Paja Formation in the urban area of the municipality of Vélez (Santander), Colombia. These rocks are mainly composed of quartz, muscovite, pyrophyllite, kaolinite and chlorite group minerals, framboidal and cubic pyrite, as well as marcasite, with minor feldspar, sulphates, and phosphates. Total organic carbon (TOC), total sulfur (TS), and millimeter fragments of algae are high, whereas few centimeters and not biodiverse small ammonite fossils, and other allochemical components are subordinated. Na–A zeolite and associated mineral phases as sodalite occur just beside the interparticle micropores (honeycomb from framboidal, cube molds, and amorphous cavities). It is facilitated by petrophysical properties alterations, due to processes of high diagenesis, temperatures up to 80–100 °C, with weathering contributions, which increase the porosity and permeability, as well as the transmissivity (fluid flow), allowing the geochemistry remobilization and/or recrystallization of pre-existing silica, muscovite, kaolinite minerals group, salts, carbonates, oxides and peroxides. X-ray diffraction analyses reveal the mineral composition of the mudstones and scanning electron micrographs show the typical cubic morphology of Na–A zeolite of approximately 0.45 mμ in particle size. Our data show that the sequence of the transformation of phases is: Poorly crystalline aluminosilicate → sodalite → Na–A zeolite. A literature review shows that this is an unusual example of the occurrence of natural zeolites in sedimentary marine rocks recognized around the world.

scholarly journals Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 232
Author(s):  
Pedro J. Sánchez-Soto ◽  
Eduardo Garzón ◽  
Luis Pérez-Villarejo ◽  
George N. Angelopoulos ◽  
Dolores Eliche-Quesada
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Phase Evolution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Mining Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.

Determination of internal stress in soldered joints with Sn-based alloys by X-ray diffraction

2021 ◽  
Author(s):  
Cosmin Codrean ◽  
Dragoş Buzdugan ◽  
Viorel-Aurel Şerban ◽  
Mircea Vodă
Keyword(s):  
Internal Stress ◽  
X Ray Diffraction ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document