Modeling and Characterization of Silicon Nanowire Networks for Thermoelectric Conversion

2012 ◽  
Vol 1456 ◽  
Author(s):  
Kate J. Norris ◽  
Andrew J. Lohn ◽  
Elane Coleman ◽  
Gary S. Tompa ◽  
Nobuhiko P. Kobayashi
Keyword(s):  
Physical Properties ◽  
Silicon Nanowires ◽  
Large Scale ◽  
Silicon Nanowire ◽  
Three Dimensional ◽  
Organic Chemical ◽  
Scale Production ◽  
Element Analysis ◽  
Seebeck Coefficients ◽  
Nanowire Networks

ABSTRACTWe report the growth of silicon nanowires by plasma assisted metal organic chemical vapor deposition. Silicon nanowires grew as three-dimensional networks in which electrical charges and heat can travel over the distance much longer than the mean length of the constituent nanowires. We studied the dependence of thermoelectric properties on two factors; nominal doping concentrations and geometrical factors within the silicon nanowire networks. The silicon nanowire networks show Seebeck coefficients comparable with that of bulk silicon for a given nominal doping concentration, allowing us to control Seebeck coefficients by tuning the doping concentrations. Rather than studying single nanowires, we chose networks of nanowires formed densely across large areas required for large scale production. We also studied the role played by intersections where multiple nanowires were fused to form the nanowire networks. Structural analysis, transport measurement, and modeling based on finite-element analysis were carried out to obtain insights of physical properties at the intersections. Understanding these physical properties of three-dimensional nanowire networks will advance the development of thermoelectric devices.

scholarly journals Process Variability in Top-Down Fabrication of Silicon Nanowire-Based Biosensor Arrays

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5153
Author(s):  
Marcel Tintelott ◽  
Vivek Pachauri ◽  
Sven Ingebrandt ◽  
Xuan Thang Vu
Keyword(s):  
Silicon Nanowires ◽  
Large Scale ◽  
Field Effect Transistors ◽  
State Of The Art ◽  
Silicon Nanowire ◽  
Limiting Factors ◽  
Scale Production ◽  
Top Down ◽  
Bottom Up ◽  
The Impact

Silicon nanowire field-effect transistors (SiNW-FET) have been studied as ultra-high sensitive sensors for the detection of biomolecules, metal ions, gas molecules and as an interface for biological systems due to their remarkable electronic properties. “Bottom-up” or “top-down” approaches that are used for the fabrication of SiNW-FET sensors have their respective limitations in terms of technology development. The “bottom-up” approach allows the synthesis of silicon nanowires (SiNW) in the range from a few nm to hundreds of nm in diameter. However, it is technologically challenging to realize reproducible bottom-up devices on a large scale for clinical biosensing applications. The top-down approach involves state-of-the-art lithography and nanofabrication techniques to cast SiNW down to a few 10s of nanometers in diameter out of high-quality Silicon-on-Insulator (SOI) wafers in a controlled environment, enabling the large-scale fabrication of sensors for a myriad of applications. The possibility of their wafer-scale integration in standard semiconductor processes makes SiNW-FETs one of the most promising candidates for the next generation of biosensor platforms for applications in healthcare and medicine. Although advanced fabrication techniques are employed for fabricating SiNW, the sensor-to-sensor variation in the fabrication processes is one of the limiting factors for a large-scale production towards commercial applications. To provide a detailed overview of the technical aspects responsible for this sensor-to-sensor variation, we critically review and discuss the fundamental aspects that could lead to such a sensor-to-sensor variation, focusing on fabrication parameters and processes described in the state-of-the-art literature. Furthermore, we discuss the impact of functionalization aspects, surface modification, and system integration of the SiNW-FET biosensors on post-fabrication-induced sensor-to-sensor variations for biosensing experiments.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals 3D DNA structural barcode copying and random access

2020 ◽  
Author(s):  
Filip Bošković ◽  
Alexander Ohmann ◽  
Ulrich F. Keyser ◽  
Kaikai Chen
Keyword(s):  
Data Storage ◽  
Single Molecule ◽  
Self Assembly ◽  
Large Scale ◽  
Three Dimensional ◽  
Random Access ◽  
Scale Production ◽  
Digital Information ◽  
Dna Nanostructures ◽  
Large Scale Production

AbstractThree-dimensional (3D) DNA nanostructures built via DNA self-assembly have established recent applications in multiplexed biosensing and storing digital information. However, a key challenge is that 3D DNA structures are not easily copied which is of vital importance for their large-scale production and for access to desired molecules by target-specific amplification. Here, we build 3D DNA structural barcodes and demonstrate the copying and random access of the barcodes from a library of molecules using a modified polymerase chain reaction (PCR). The 3D barcodes were assembled by annealing a single-stranded DNA scaffold with complementary short oligonucleotides containing 3D protrusions at defined locations. DNA nicks in these structures are ligated to facilitate barcode copying using PCR. To randomly access a target from a library of barcodes, we employ a non-complementary end in the DNA construct that serves as a barcode-specific primer template. Readout of the 3D DNA structural barcodes was performed with nanopore measurements. Our study provides a roadmap for convenient production of large quantities of self-assembled 3D DNA nanostructures. In addition, this strategy offers access to specific targets, a crucial capability for multiplexed single-molecule sensing and for DNA data storage.

scholarly journals Strategy and numerical modelling of a vehicle seat with a lightweight sandwich design for large-scale production

2018 ◽  
Vol 1 (2) ◽  
Author(s):  
Song Ren ◽  
Kay Schäfer ◽  
Daisy Nestler ◽  
Dominik Krumm ◽  
Stephan Odenwald ◽  
...  
Keyword(s):  
Large Scale ◽  
Static Load ◽  
Lightweight Design ◽  
Scale Production ◽  
Front Seat ◽  
Element Analysis ◽  
Large Scale Production ◽  
Spacer Fabric ◽  
Glass Fibre Reinforced ◽  
Vehicle Seat

A lightweight vehicle front seat with a sandwich structure, which consists of skin layers made of glass fibre-reinforced thermoplastic prepregs and a core consisting of a warp knitted spacer fabric filled with polyurethane foam, was developed. The strength test simulations of the seat structure were performed using a Finite Element Analysis approach. The results validate the new sandwich design of the vehicle seat with its adequate strength under a static load. With the innovative lightweight design, the mass of the seat was reduced up to 57 % in comparison to the reference seat from conventional mass production. In addition, a manufacturing process was advised for a large-scale production of the lightweight design within one workstation.

Dynamic Analysis of Large-Scale Power House

2012 ◽  
Vol 446-449 ◽  
pp. 837-840
Author(s):  
Yu Zhao ◽  
Shu Fang Yuan ◽  
Jian Wei Zhang
Keyword(s):  
Finite Element ◽  
Dynamic Characteristics ◽  
Large Scale ◽  
Three Dimensional ◽  
Dynamic Responses ◽  
Dynamic Loads ◽  
Element Analysis ◽  
Power House ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

The underwater structure of power house is major structure under the dynamic loads of unit. The vibration problem is very common in operation. So the structures should have sufficient stiffness to resist dynamic loads of unit. This paper establishes three-dimensional finite element models with finite element analysis software—ANSYS. Dynamic characteristics of the power house and dynamic responses of structure under earthquake are analyzed. The results of the computation show that fluid-solid coupling may be ignored when studying dynamic characteristics of structures of the underground power house.

scholarly journals Superior Pseudocapacitive Storage of a Novel Ni3Si2/NiOOH/Graphene Nanostructure for an All-Solid-State Supercapacitor

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Jing Ning ◽  
Maoyang Xia ◽  
Dong Wang ◽  
Xin Feng ◽  
Hong Zhou ◽  
...  
Keyword(s):  
Solid State ◽  
High Performance ◽  
Large Scale ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
Specific Area ◽  
High Energy ◽  
Scale Production ◽  
Free Standing

Abstract Recent developments in the synthesis of graphene-based structures focus on continuous improvement of porous nanostructures, doping of thin films, and mechanisms for the construction of three-dimensional architectures. Herein, we synthesize creeper-like Ni3Si2/NiOOH/graphene nanostructures via low-pressure all-solid melting-reconstruction chemical vapor deposition. In a carbon-rich atmosphere, high-energy atoms bombard the Ni and Si surface, and reduce the free energy in the thermodynamic equilibrium of solid Ni–Si particles, considerably catalyzing the growth of Ni–Si nanocrystals. By controlling the carbon source content, a Ni3Si2 single crystal with high crystallinity and good homogeneity is stably synthesized. Electrochemical measurements indicate that the nanostructures exhibit an ultrahigh specific capacity of 835.3 C g−1 (1193.28 F g−1) at 1 A g−1; when integrated as an all-solid-state supercapacitor, it provides a remarkable energy density as high as 25.9 Wh kg−1 at 750 W kg−1, which can be attributed to the free-standing Ni3Si2/graphene skeleton providing a large specific area and NiOOH inhibits insulation on the electrode surface in an alkaline solution, thereby accelerating the electron exchange rate. The growth of the high-performance composite nanostructure is simple and controllable, enabling the large-scale production and application of microenergy storage devices.

Analysis of recombinant tagged equilibrative nucleoside transporter 1 (ENT1) expressed in E. coliThis paper is one of a selection of papers published in a Special Issue entitled CSBMCB 53rd Annual Meeting — Membrane Proteins in Health and Disease, and has undergone the Journal’s usual peer review process.

2011 ◽  
Vol 89 (2) ◽  
pp. 246-255 ◽  
Author(s):  
German Reyes ◽  
Nicole M.I. Nivillac ◽  
Maria Chalsev ◽  
Imogen R. Coe
Keyword(s):  
Membrane Proteins ◽  
Large Scale ◽  
Peer Review Process ◽  
Three Dimensional ◽  
Drug Uptake ◽  
Dimensional Structure ◽  
Parasitic Infections ◽  
Scale Production ◽  
Nucleoside Transporter ◽  
Intracellular Loop

Nucleoside transporters (NTs) are integral membrane proteins necessary for the cellular entry of nucleoside analog drugs used in chemotherapeutic treatment of conditions such as cancer and viral or parasitic infections. NTs are also the targets of certain drugs used in the treatment of various cardiovascular conditions. Because of the importance of NTs in drug uptake, determination of the three-dimensional structure of these proteins, particularly hENT1, has the potential to improve these treatments through structure-based design of more specifically targeted and transported drugs. In this paper, we use NMR spectroscopy to investigate the structure of the large intracellular loop between transmembrane domains 6 and 7 and we also describe a method for the successful overexpression of full-length hENT1 in a bacterial system. Recombinant tandem histidine-affinity (HAT) and 3×FLAG tagged hENT1 was overexpressed in E. coli, affinity purified, and functionally characterized by nitrobenzylthioinosine (NBTI) binding. Anti-3×FLAG immunodetection confirmed the expression of N-HAT-3×FLAG-hENT1, while increased NBTI binding (3.2-fold compared with controls) confirmed the conformational integrity of the recombinant hENT1 within the bacterial inner membrane. Yields of recombinant hENT1 using this approach were ∼15 µg/L of bacterial culture and this approach provides a basis for large-scale production of protein for a variety of purposes.

The effect of pressure and temperature on microthermoforming thermoplastic films integrated in the injection moulding process

2016 ◽  
Vol 36 (6) ◽  
pp. 597-605 ◽  
Author(s):  
Ariane Jungmeier
Keyword(s):  
Injection Moulding ◽  
Large Scale ◽  
Three Dimensional ◽  
Scale Production ◽  
Moulding Process ◽  
Cycle Times ◽  
Large Scale Production ◽  
Flow Length ◽  
Injection Moulding Process ◽  
Fitting In

Abstract Injection moulding is a widespread large-scale production technology for the manufacturing of thermoplastic parts, with small wall thicknesses limiting the feasible flow length. Introducing microthermoforming into the injection moulding process with dynamic mould temperature control enables the production of film-based, plane microstructured parts with further three-dimensional functional structures (e.g. for handling or for fitting in devices/assembly groups). Investigations show that considerable forming is possible with pressures up to 140 bar and forming temperatures far below the glass transition temperature of 50-μm-thick polycarbonate films in cycle times of <3 min. Generally speaking, the novel technology is expected to allow for multifunctional, thin-walled microstructured parts at large scales with short cycle times.

Development of the Next-Generation Computational Fracture Mechanics Simulator on the Earth Simulator 2

2012 ◽  
Author(s):  
Kaworu Yodo ◽  
Hiroshi Kawai ◽  
Hiroshi Okada ◽  
Masao Ogino ◽  
Ryuji Shioya
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Intensity ◽  
Fracture Mechanics ◽  
Large Scale ◽  
Three Dimensional ◽  
Intensity Factors ◽  
Element Analysis ◽  
Mechanics Analysis ◽  
Analysis System

Fracture mechanics analysis using the finite element method has been one of the key methodologies to evaluate structural integrity for aging infrastructures such as aircraft, ship, power plants, etc. However, three-dimensional crack analyses for structures with highly complex three-dimensional shapes have not widely been used, because of many technical difficulties such as the lack of enough computational power. The authors have been developing a fracture mechanics analysis system that can deal with arbitrary shaped cracks in three-dimensional structures. The system consists of mesh generation software, a finite element analysis program and a fracture mechanics module. In our system, a Virtual Crack Closure-Integral Method (VCCM) for the quadratic tetrahedral finite elements is adopted to evaluate the stress intensity factors. This system can perform the three-dimensional fracture analyses. Fatigue and SCC crack propagation analyses with more than one cracks of arbitrary complicated shapes and orientations. The rate and direction of crack propagation are predicted by using appropriate formulae based on the stress intensity factors. When the fracture mechanics analysis system is applied to the complex shaped aging structures with the cracks which are modeled explicitly, the size of finite element analysis tends to be very large. Therefore, a large scale parallel structural analysis code is required. We also have been developing an open-source CAE system, ADVENTURE. It is based on the hierarchical domain decomposition method (HDDM) with the balancing domain decomposition (BDD) pre-conditioner. A general-purpose parallel structural analysis solver, ADVENTURE_Solid is one of the solver modules of the ADVENTURE system. In this paper, we combined VCCM for the tetrahedral finite element with ADVENTURE system and large-scale fracture analyses are fully automated. They are performed using the massively parallel super computer ES2 (Earth Simulator 2) which is owned and run by JAMSTEC (Japan Agency for Marine-Earth Science and Technology).

Sign in / Sign up

Export Citation Format

Share Document