Characterization of a monolithic device for detection of FRET signals

2012 ◽  
Vol 1426 ◽  
pp. 187-192 ◽  
Author(s):  
P. Louro ◽  
M. Vieira ◽  
M. A. Vieira ◽  
V. Silva ◽  
J. Costa
Keyword(s):  
Fluorescent Proteins ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Standard Technique ◽  
Cost Effective ◽  
Optical Filters ◽  
Visible Range ◽  
Optical Signals ◽  
Mechanical Parts

ABSTRACTFluorescence Resonance Energy Transfer (FRET) is a standard technique used in many medical and biological applications. It involves the detection of transient fluorescent signals coming from the different fluorescent proteins that work in the visible range of the spectrum. Common fluorescent emissions come from the cyan/yellow fluorophores that emit respectively, at 470 nm and 588 nm. In this paper we use optical filters based on multilayered a-SiC:H heterostructures to detect optical signals at these wavelengths. The advantage of this type of sensor is that it does not rely on mechanical parts; it is compact and cost effective. The transducer consists of two heterostructures based on a-SiC:H/a-Si:H optimized for the detection of the fluorescence emissions at wavelengths 470 nm (cyan) and 588 nm (yellow). Both front and back structures were designed to optimize the detection at these wavelengths. Results show that the device photocurrent signal measured under reverse bias and using appropriate steady state optical bias, allows the separate detection of the cyan and yellow fluorescence signals.

Use of a-SiC:H multilayer transducers for detection of fluorescence signals from reactive cyan and yellow fluorophores

2011 ◽  
Vol 1321 ◽  
Author(s):  
P. Louro ◽  
M. Vieira ◽  
M. A. Vieira ◽  
J. Costa ◽  
M. Fernandes ◽  
...  
Keyword(s):  
Spectral Response ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Optical Filters ◽  
Electrical Model ◽  
Excitation Light ◽  
Independent Test ◽  
Opposite Behavior ◽  
Blue Background ◽  
Insight Into

ABSTRACTThe transducer consists of a p-i’(a-SiC:H)-n/p-i(a-Si:H)-n heterostructures produced by PECVD and optimized for the detection of the fluorescence resonance energy transfer between fluorophores with excitation in the violet(400 nm) and emissions in the cyan (470 nm) and yellow (588 nm) range of the spectrum. The thickness and the absorption coefficient of the i’- and i- layers were tailored for cyan and yellow optical confinement, respectively in the front and back photodiodes acting both as optical filters. The devices were characterized through transmittance and spectral response measurements and under different electrical.To simulate the FRET pairs and the excitation light a chromatic time dependent combination of violet, cyan and yellow wavelengths was applied to the device. The generated photocurrent was measured under negative and positive bias to readout the combined spectra. The independent test signals were chosen in order to sample all the possible chromatic. Different wavelength backgrounds were also superimposed.Results show that under negative bias the phorocurrent signal presents eight separate levels each one assigned to the different polychromatic mixtures. If a blue background is superimposed the yellow channel is enhanced and the cyan suppressed while under red irradiation the opposite behavior occurs. So under appropriated steady state optical bias the sensor will detect separately the cyan and yellow fluorescence pairs. An electrical model, supported by a numerical simulation, gives insight into the transduction mechanism.

scholarly journals Single-Molecule Studies on a FRET Biosensor: Lessons from a Comparison of Fluorescent Protein Equipped versus Dye-Labeled Species

Molecules ◽  
2018 ◽  
Vol 23 (12) ◽  
pp. 3105 ◽  
Author(s):  
Henning Höfig ◽  
Michele Cerminara ◽  
Ilona Ritter ◽  
Antonie Schöne ◽  
Martina Pohl ◽  
...  
Keyword(s):  
Conformational Change ◽  
Single Molecule ◽  
Fluorescent Dyes ◽  
Fluorescent Protein ◽  
Fluorescent Proteins ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Strong Increase ◽  
Single Molecule Level ◽  
Labeling Scheme

Bacterial periplasmic binding proteins (PBPs) undergo a pronounced ligand-induced conformational change which can be employed to monitor ligand concentrations. The most common strategy to take advantage of this conformational change for a biosensor design is to use a Förster resonance energy transfer (FRET) signal. This can be achieved by attaching either two fluorescent proteins (FPs) or two organic fluorescent dyes of different colors to the PBPs in order to obtain an optical readout signal which is closely related to the ligand concentration. In this study we compare a FP-equipped and a dye-labeled version of the glucose/galactose binding protein MglB at the single-molecule level. The comparison demonstrates that changes in the FRET signal upon glucose binding are more pronounced for the FP-equipped sensor construct as compared to the dye-labeled analog. Moreover, the FP-equipped sensor showed a strong increase of the FRET signal under crowding conditions whereas the dye-labeled sensor was not influenced by crowding. The choice of a labeling scheme should therefore be made depending on the application of a FRET-based sensor.

scholarly journals Proteasomal conformation controls unfolding ability

2021 ◽  
Vol 118 (25) ◽  
pp. e2101004118
Author(s):  
Julianna R. Cresti ◽  
Abramo J. Manfredonia ◽  
Christopher E. Bragança ◽  
Joseph A. Boscia ◽  
Christina M. Hurley ◽  
...  
Keyword(s):  
Conformational Changes ◽  
Fluorescent Proteins ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Conformational State ◽  
26S Proteasome ◽  
Eukaryotic Cells ◽  
Ubiquitinated Protein ◽  
Equilibrium Conditions ◽  
Substrate Processing

The 26S proteasome is the macromolecular machine responsible for the bulk of protein degradation in eukaryotic cells. As it degrades a ubiquitinated protein, the proteasome transitions from a substrate-accepting conformation (s1) to a set of substrate-processing conformations (s3 like), each stabilized by different intramolecular contacts. Tools to study these conformational changes remain limited, and although several interactions have been proposed to be important for stabilizing the proteasome’s various conformations, it has been difficult to test these directly under equilibrium conditions. Here, we describe a conformationally sensitive Förster resonance energy transfer assay, in which fluorescent proteins are fused to Sem1 and Rpn6, which are nearer each other in substrate-processing conformations than in the substrate-accepting conformation. Using this assay, we find that two sets of interactions, one involving Rpn5 and another involving Rpn2, are both important for stabilizing substrate-processing conformations. Mutations that disrupt these interactions both destabilize substrate-processing conformations relative to the substrate-accepting conformation and diminish the proteasome’s ability to successfully unfold and degrade hard-to-unfold substrates, providing a link between the proteasome’s conformational state and its unfolding ability.

scholarly journals Development of FRET-based indicators for visualizing homophilic trans interaction of a clustered protocadherin

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Takashi Kanadome ◽  
Natsumi Hoshino ◽  
Takeharu Nagai ◽  
Tomoki Matsuda ◽  
Takeshi Yagi
Keyword(s):  
Fluorescent Proteins ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Direct Visualization ◽  
Binding Properties ◽  
New Approach ◽  
Self Recognition ◽  
Highly Sensitive ◽  
Donor And Acceptor ◽  
Clustered Protocadherins

AbstractClustered protocadherins (Pcdhs), which are cell adhesion molecules, play a fundamental role in self-recognition and non-self-discrimination by conferring diversity on the cell surface. Although systematic cell-based aggregation assays provide information regarding the binding properties of Pcdhs, direct visualization of Pcdh trans interactions across cells remains challenging. Here, we present Förster resonance energy transfer (FRET)-based indicators for directly visualizing Pcdh trans interactions. We developed the indicators by individually inserting FRET donor and acceptor fluorescent proteins (FPs) into the ectodomain of Pcdh molecules. They enabled successful visualization of specific trans interactions of Pcdh and revealed that the Pcdh trans interaction is highly sensitive to changes in extracellular Ca2+ levels. We expect that FRET-based indicators for visualizing Pcdh trans interactions will provide a new approach for investigating the roles of Pcdh in self-recognition and non-self-discrimination processes.

scholarly journals FRET Microscopy in Yeast

Biosensors ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 122 ◽  
Author(s):  
Skruzny ◽  
Pohl ◽  
Abella
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Fluorescent Proteins ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Living Cells ◽  
Bioactive Molecules ◽  
Biophysical Processes ◽  
Microscopy Method ◽  
Fret Biosensors

Förster resonance energy transfer (FRET) microscopy is a powerful fluorescence microscopy method to study the nanoscale organization of multiprotein assemblies in vivo. Moreover, many biochemical and biophysical processes can be followed by employing sophisticated FRET biosensors directly in living cells. Here, we summarize existing FRET experiments and biosensors applied in yeasts Saccharomyces cerevisiae and Schizosaccharomyces pombe, two important models of fundamental biomedical research and efficient platforms for analyses of bioactive molecules. We aim to provide a practical guide on suitable FRET techniques, fluorescent proteins, and experimental setups available for successful FRET experiments in yeasts.

scholarly journals Genetically Encoded Fluorescent Sensor for Poly-ADP-Ribose

2020 ◽  
Vol 21 (14) ◽  
pp. 5004
Author(s):  
Ekaterina O. Serebrovskaya ◽  
Nadezda M. Podvalnaya ◽  
Varvara V. Dudenkova ◽  
Anna S. Efremova ◽  
Nadya G. Gurskaya ◽  
...  
Keyword(s):  
Ubiquitin Ligase ◽  
Mammalian Cells ◽  
Fluorescent Proteins ◽  
Fluorescent Sensor ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Post Translational Modification ◽  
Cellular Processes ◽  
Hydrogen Peroxide Treatment ◽  
Damage Response

Poly-(ADP-ribosyl)-ation (PARylation) is a reversible post-translational modification of proteins and DNA that plays an important role in various cellular processes such as DNA damage response, replication, transcription, and cell death. Here we designed a fully genetically encoded fluorescent sensor for poly-(ADP-ribose) (PAR) based on Förster resonance energy transfer (FRET). The WWE domain, which recognizes iso-ADP-ribose internal PAR-specific structural unit, was used as a PAR-targeting module. The sensor consisted of cyan Turquoise2 and yellow Venus fluorescent proteins, each in fusion with the WWE domain of RNF146 E3 ubiquitin ligase protein. This bipartite sensor named sPARroW (sensor for PAR relying on WWE) enabled monitoring of PAR accumulation and depletion in live mammalian cells in response to different stimuli, namely hydrogen peroxide treatment, UV irradiation and hyperthermia.

scholarly journals Analysis of IFITM-IFITM Interactions by a Flow Cytometry-Based FRET Assay

2019 ◽  
Vol 20 (16) ◽  
pp. 3859 ◽  
Author(s):  
Michael Winkler ◽  
Florian Wrensch ◽  
Pascale Bosch ◽  
Maike Knoth ◽  
Michael Schindler ◽  
...  
Keyword(s):  
Antiviral Activity ◽  
Protein Interactions ◽  
Viral Entry ◽  
Cellular Localization ◽  
Fluorescent Protein ◽  
Fluorescent Proteins ◽  
Yellow Fluorescent Protein ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Protein Protein Interactions

The interferon-induced transmembrane proteins 1–3 (IFITM1–3) inhibit host cell entry of several viruses. However, it is incompletely understood how IFITM1–3 exert antiviral activity. Two phenylalanine residues, F75 and F78, within the intramembrane domain 1 (IM1) were previously shown to be required for IFITM3/IFITM3 interactions and for inhibition of viral entry, suggesting that IFITM/IFITM interactions might be pivotal to antiviral activity. Here, we employed a fluorescence resonance energy transfer (FRET) assay to analyze IFITM/IFITM interactions. For assay calibration, we equipped two cytosolic, non-interacting proteins, super yellow fluorescent protein (SYFP) and super cyan fluorescent protein (SCFP), with signals that target proteins to membrane rafts and also analyzed a SCFP-SYFP fusion protein. This strategy allowed us to discriminate background signals resulting from colocalization of proteins at membrane subdomains from signals elicited by protein–protein interactions. Coexpression of IFITM1–3 and IFITM5 fused to fluorescent proteins elicited strong FRET signals, and mutation of F75 and F78 in IFITM3 (mutant IFITM3-FF) abrogated antiviral activity, as expected, but did not alter cellular localization and FRET signals. Moreover, IFITM3-FF co-immunoprecipitated efficiently with wild type (wt) IFITM3, lending further support to the finding that lack of antiviral activity of IFITM3-FF was not due to altered membrane targeting or abrogated IFITM3-IFITM3 interactions. Collectively, we report an assay that allows quantifying IFITM/IFITM interactions. Moreover, we confirm residues F75 and F78 as critical for antiviral activity but also show that these residues are dispensable for IFITM3 membrane localization and IFITM3/IFITM3 interactions.

Sign in / Sign up

Export Citation Format

Share Document