Nano-Flower MnO2 Coated Graphene Composite Electrodes for Energy Storage Devices

2011 ◽  
Vol 1303 ◽  
Author(s):  
Qian Cheng ◽  
Jie Tang ◽  
Jun Ma ◽  
Han Zhang ◽  
Norio Shinya ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Energy Storage ◽  
Specific Capacitance ◽  
High Performance ◽  
Composite Electrodes ◽  
Energy Storage Devices ◽  
Promising Candidate ◽  
Storage Devices ◽  
Transmission Electron ◽  
Charging Current

ABSTRACTGraphene, two-dimensional layers of sp2-bonded carbon, has many unique properties. In this paper, graphene is decorated with flower-like MnO2 nanostructures for the application in energy storage devices. The as-prepared graphene and MnO2 nano-flowers, which were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), were assembled into an asymmetric supercapacitor. The specific capacitance of the graphene electrode reached 245 F/g at a charging current of 1 mA. The MnO2 nano-flowers which consisted of tiny rods with a diameter of less than 10 nm were coated onto the graphene electrodes by electrodeposition. The specific capacitance after the MnO2 deposition is 328 F/g at the charging current of 1 mA with an energy density of 11.4Wh/kg and power density of 25.8 kW/kg. This work suggests that our graphene-based electrodes can be a promising candidate for high-performance energy storage devices.

scholarly journals Nanosheet-Assembled MnO2-Integrated Electrode Based on the Low-Temperature and Green Chemical Route

Crystals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 115
Author(s):  
Xiaoli Wang ◽  
Yin Wang ◽  
Xinyu Zhao
Keyword(s):  
Energy Storage ◽  
Low Temperature ◽  
Specific Capacitance ◽  
Nickel Foam ◽  
Renewable Energy Sources ◽  
Three Dimensional ◽  
Composite Electrodes ◽  
Energy Storage Devices ◽  
Chemical Route ◽  
Storage Devices

The development of superior electrochemical energy-storage devices designed through a facile, cost-efficient, and green synthesis technique is the key to addressing the intermittent nature of renewable energy sources such as solar and wind energy. In our present work, we design a simple, surfactant-free, and low-temperature chemical strategy to prepare novel integrated, MnO2 composite electrodes with two-dimensional (2D) nanosheet film directly supported on three-dimensional (3D) conductive nickel foam. Benefiting from the specific 2D nanosheet architecture to provide a large interfacial contact area and highly conductive metal scaffolds to facilitate fast electron transfer, the novel nanosheet-assembled MnO2-integrated electrodes exhibit higher specific capacitance of 446 F g−1 at the current density of 1 A g−1 compared with nanostructured MnO2 and commercial MnO2 powder electrodes. More importantly, the as-synthesized devices are able to achieve an outstanding cycling performance of 95% retention after 3000 cycles. The present work, which is based on the low-temperature chemical route to deposit active materials on the conductive substrate, provides new insights into designing a binder-free supercapacitor system to improve the specific capacitance, cycling, and rate performance as next-generation, energy-storage devices.

scholarly journals Effect of Time on a Hierarchical Corn Skeleton-Like Composite of CoO@ZnO as Capability Electrode Material for High Specific Performance Supercapacitors

2018 ◽  
Author(s):  
Anil Kumar Yedluri ◽  
Hee-Je Kim
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Energy Storage Devices ◽  
X Ray ◽  
Storage Devices ◽  
Transmission Electron ◽  
Potential Applications ◽  
Oxygen Groups ◽  
Cbd Method

CoO-ZnO-based composites have attracted considerable attention for the development of energy storage devices because of their multifunctional characterization and ease of integration with existing components. This paper reports the synthesis of CoO@ZnO (CZ) nanostructures on Ni foam by the CBD method for facile and eco-friendly supercapacitor applications. The formation of a CoO@ZnO electrode functioned with cobalt, zinc, nickel and oxygen groups was confirmed by X-ray diffraction, X-ray photoelectron spectroscopy, low and high-resolution of scanning electron microscopy, and transmission electron microscopy. The as-synthesized hierarchical nanocorn skeleton-like structure of CoO@ZnO-3h (CZ3h) electrode delivered a higher specific capacitance of 1136 F/g at a current density of 3 A/g with outstanding cycling stability, showing 98.3% capacitance retention over 3000 cycles in an aqueous 2 M KOH electrolyte solution. This retention was significantly better than that of other prepared electrodes, such as CoO (CO), ZnO (ZO), CoO@ZnO-1h (CZ1h), and CoO@ZnO-7h (CZ7h) (274, 383, 240 and 537 F/g, respectively). This superior capacitance was attributed to the ideal surface morphology of CZ3h, which is responsible for the rapid electron/ion transfer between the electrolyte and electrode surface area. The enhanced features of the CZ3h electrode highlight potential applications in high performance supercapacitors, solar cells, photocatalysis, and electrocatalysis.

Mixed ternary metal MFeCo (M = Al, Mg, Cu, Zn, or Ni) oxide electrodes for high-performance energy storage devices

Ionics ◽  
2021 ◽  
Author(s):  
Morteza Saghafi Yazdi ◽  
Seied Ali Hosseini ◽  
Zeynodin Karami ◽  
Ali Olamaee ◽  
Mohammad Abedini ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Oxide Electrodes ◽  
Ternary Metal ◽  
Ni Oxide

scholarly journals Oxygen-Deficient Stannic Oxide/Graphene for Ultrahigh-Performance Supercapacitors and Gas Sensors

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 372
Author(s):  
Liyang Lin ◽  
Susu Chen ◽  
Tao Deng ◽  
Wen Zeng
Keyword(s):  
Energy Storage ◽  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Synthesis Method ◽  
Rate Capability ◽  
Stannic Oxide ◽  
Energy Storage Devices ◽  
Graphene Nanocomposites ◽  
Storage Devices

The metal oxides/graphene nanocomposites have great application prospects in the fields of electrochemical energy storage and gas sensing detection. However, rational synthesis of such materials with good conductivity and electrochemical activity is the topical challenge for high-performance devices. Here, SnO2/graphene nanocomposite is taken as a typical example and develops a universal synthesis method that overcome these challenges and prepares the oxygen-deficient SnO2 hollow nanospheres/graphene (r-SnO2/GN) nanocomposite with excellent performance for supercapacitors and gas sensors. The electrode r-SnO2/GN exhibits specific capacitance of 947.4 F g−1 at a current density of 2 mA cm−2 and of 640.0 F g−1 even at 20 mA cm−2, showing remarkable rate capability. For gas-sensing application, the sensor r-SnO2/GN showed good sensitivity (~13.8 under 500 ppm) and short response/recovering time toward methane gas. These performance features make r-SnO2/GN nanocomposite a promising candidate for high-performance energy storage devices and gas sensors.

scholarly journals Layered double hydroxide membrane with high hydroxide conductivity and ion selectivity for energy storage device

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jing Hu ◽  
Xiaomin Tang ◽  
Qing Dai ◽  
Zhiqiang Liu ◽  
Huamin Zhang ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Ion Selectivity ◽  
Storage Device ◽  
Hydroxyl Groups ◽  
Flow Battery ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Ions Transport ◽  
Double Hydroxides

AbstractMembranes with fast and selective ions transport are highly demanded for energy storage devices. Layered double hydroxides (LDHs), bearing uniform interlayer galleries and abundant hydroxyl groups covalently bonded within two-dimensional (2D) host layers, make them superb candidates for high-performance membranes. However, related research on LDHs for ions separation is quite rare, especially the deep-going study on ions transport behavior in LDHs. Here, we report a LDHs-based composite membrane with fast and selective ions transport for flow battery application. The hydroxide ions transport through LDHs via vehicular (standard diffusion) & Grotthuss (proton hopping) mechanisms is uncovered. The LDHs-based membrane enables an alkaline zinc-based flow battery to operate at 200 mA cm−2, along with an energy efficiency of 82.36% for 400 cycles. This study offers an in-depth understanding of ions transport in LDHs and further inspires their applications in other energy-related devices.

Catalytic Separator with Co–N–C Nanoreactor for High-Performance Lithium-Sulfur Batteries

2021 ◽  
Author(s):  
Longtao Ren ◽  
Qian Wang ◽  
Yajie Li ◽  
Cejun Hu ◽  
Yajun Zhao ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
High Performance ◽  
Next Generation ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur

Rechargeable lithium-sulfur (Li–S) batteries are considered one of the most promising next-generation energy storage devices because of their high theoretical energy density. However, the dissolution of lithium polysulfides (LiPSs) in...

scholarly journals A germanium and zinc chalcogenide as an anode for a high-capacity and long cycle life lithium battery

RSC Advances ◽  
2019 ◽  
Vol 9 (60) ◽  
pp. 35045-35049
Author(s):  
Xu Chen ◽  
Jian Zhou ◽  
Jiarui Li ◽  
Haiyan Luo ◽  
Lin Mei ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Lithium Battery ◽  
Large Scale ◽  
High Capacity ◽  
Lithium Ion ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Long Cycle Life ◽  
Zinc Chalcogenide

High-performance lithium ion batteries are ideal energy storage devices for both grid-scale and large-scale applications.

Sign in / Sign up

Export Citation Format

Share Document