Chalcogenide Glass Thin Films for Nanodipole Junctionless Photovoltaics

2011 ◽  
Vol 1322 ◽  
Author(s):  
Sakina Junaghadwala ◽  
Daniel G. Georgiev ◽  
Victor G. Karpov ◽  
Rossen Todorov ◽  
Nanke Jiang

ABSTRACTWe examine the potential of Bi-Ge-Se chalcogenide glass films as materials for a new type of photovoltaic devices, referred to as junctionless nanodipole PV. Glasses of a chemical composition providing a significant optical absorption were synthesized in quartz ampoules from high-purity Bi, Ge, and Se elements by a conventional melt quenching technique. This material was then used to deposit thin films with different thicknesses on various substrates by thermal evaporation under high-vacuum conditions. The original bulk glasses and the films were characterized by electron microscopy with EDS, XRD, Raman spectroscopy, differential scanning calorimetry, and spectrophotometry. Open-circuit voltage (Voc) readings under incandescent illumination were obtained from the as-deposited and annealed films. Results from this characterization work are presented and discussed. Although the efficiency of nanodipole PV material structures, based on this material remains of no practical interest, our initial results indicate a possible path for the implementation of the nanodipole PV concept.

Author(s):  
H. Bitam ◽  
B. Hadjoudja ◽  
Beddiaf Zaidi ◽  
C. Shakher ◽  
S. Gagui ◽  
...  

Due to increased energy intensive human activities resulting accelerated demand for electric power coupled with occurrence of natural disasters with increased frequency, intensity, and duration, it becomes essential to explore and advance renewable energy technology for sustainability of the society. Addressing the stated problem and providing a radical solution has been attempted in this study. To harvest the renewable energy, among variety of solar cells reported, a composite a-Si/CZTS photovoltaic devices has not yet been investigated. The calculated parameters for solar cell based on the new array of layers consisting of a-Si/CZTS are reported in this study. The variation of i) solar cell efficiency as a function of CZTS layer thickness, temperature, acceptor, and donor defect concentration; ii) variation of the open circuit current density as a function of temperature, open circuit voltage; iii) variation of open circuit voltage as a function of the thickness of the CZTS layer has been determined. There has been no reported study on a-Si/CZTS configuration-based solar cell, analysis of the parameters, and study to address the challenges imped efficiency of the photovoltaic device and the same has been discussed in this work. The value of the SnO2/a-Si/CZTS solar cells obtained from the simulation is 23.9 %.


2017 ◽  
Vol 47 ◽  
pp. 162-173 ◽  
Author(s):  
Yuan Jay Chang ◽  
Jung-Lien Hsu ◽  
Yi-Hua Li ◽  
Sajal Biring ◽  
Tzu-Hung Yeh ◽  
...  

2013 ◽  
Vol 566 ◽  
pp. 137-140 ◽  
Author(s):  
Hiroki Ichiboshi ◽  
Kenichi Myoujin ◽  
Takayuki Kodera ◽  
Takashi Ogihara

Ce0.8Sm0.2O1.9 (Samaria-doped ceria: SDC) precursors were synthesized by carbon-assisted spray pyrolysis. SDC thin films were prepared by electrophoretic deposition using the SDC precursor particles. The as-prepared SDC thin films were sintered at 1600 °C for 10 h. Uniform films with a thickness of approximately 20 μm were obtained. A fuel cell using the prepared thin films showed a maximum power density of 60.6 mW/cm2 and an open circuit voltage (OCV) of 0.63 V at 700 °C.


2007 ◽  
Vol 1 (1) ◽  
pp. R43-R45 ◽  
Author(s):  
Rodolfo L. Patyk ◽  
Bruno S. Lomba ◽  
Ana Flávia Nogueira ◽  
Clascídia A. Furtado ◽  
Adelina Pinheiro Santos ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document