Development of Platinum-Group-Metal Superalloys for High-Temperature Use

MRS Bulletin ◽  
2003 ◽  
Vol 28 (9) ◽  
pp. 632-638 ◽  
Author(s):  
L. A. Cornish ◽  
B. Fischer ◽  
R. Völkl
Keyword(s):  
Electron Microscopy ◽  
High Temperature ◽  
Oxide Dispersion Strengthened ◽  
Platinum Group Metal ◽  
Platinum Group Metals ◽  
Compression Tests ◽  
Two Phase ◽  
Transmission Electron ◽  
Oxide Particles ◽  
Platinum Group

AbstractSuperalloys based on platinum-group metals are being developed for high-temperature applications. These alloys have two-phase structures comprising either ordered precipitates in a matrix analogous to the nickel-based superalloys or a fine dispersion of oxide particles in a matrix analogous to oxide-dispersion-strengthened nickel-based alloys. Currently, alloys based on iridium, rhodium, and platinum have been obtained. This article reviews the rationale of developments and the progress made in this area. Oxidation and compression tests as well as characterization with scanning electron microscopy and transmission electron microscopy were undertaken. These tests showed encouraging results, and further work is being done on new alloying additions and tensile testing.

Platinum Group Metals Base Refractory Superalloys

1996 ◽  
Vol 460 ◽  
Author(s):  
Y. Yamabe-Mitarai ◽  
Y. Koizumi ◽  
H. Murakami ◽  
Y. Ro ◽  
T. Maruko ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Platinum Group Metals ◽  
Compression Tests ◽  
Two Phase ◽  
X Ray ◽  
Melting Temperatures ◽  
High Temperature Materials ◽  
Transmission Electron ◽  
Two Phases

ABSTRACTIr- and Rh-base refractory superalloys with an fee and Lb two phase structure similar to Ni-base superalloys, yet with considerably higher melting temperatures have been proposed. Fee and Ll2 two phases were observed in these alloys by transmission electron microscopy and X-ray powder diffractometry. The compression tests of these alloys showed that the strengths of several alloys were about 200 MPa at 1800 °C and these alloys have potential to become ultra-high temperature materials for use in power engineering field.

High-Temperature In Situ Straining Experiments in the High-Voltage Electron Microscope

1998 ◽  
Vol 4 (3) ◽  
pp. 226-234 ◽  
Author(s):  
Ulrich Messerschmidt ◽  
Dietmar Baither ◽  
Martin Bartsch ◽  
Bernd Baufeld ◽  
Bert Geyer ◽  
...  
Keyword(s):  
High Temperature ◽  
High Temperatures ◽  
Oxide Dispersion Strengthened ◽  
Voltage Electron ◽  
Dislocation Plasticity ◽  
Transmission Electron ◽  
Macroscopic Deformation ◽  
Oxide Particles ◽  
Short Time

Design rules are described here for high-temperature straining stages for transmission electron microscopy. Temperatures above 1000°C can be attained by electron bombardment of the specimen grips. Thermal equilibrium can be reached in a short time by carrying off the heat by water cooling. Some applications of this stage are described. Ferroelastic deformation was observed at 1150°C in t′ and partially stabilized zirconia, which changes the microstructure for successive dislocation plasticity. In the oxide-dispersion-strengthened alloy INCOLOY MA 956, dislocations are impeded by oxide particles and move smoothly between the particles. At high temperatures, both the resting and traveling times control the average dislocation velocity. In MoSi2 single crystals of a soft orientation, dislocations with 1/2〈111〉 Burgers vectors are created in localized sources and move on {110} planes in a viscous manner. The dislocations in Al-Pd-Mn single quasicrystals are oriented in preferred crystallographic directions and move in a viscous way as well. On the basis of in situ observations, conclusions are drawn for interpreting macroscopic deformation behavior at high temperatures.

Structure and Phase Composition of Ni-Al-Co-Mе-Based Alloy Containing Rhenium and Ruthenium

2020 ◽  
Vol 303 ◽  
pp. 111-117
Author(s):  
E.L. Nikonenko ◽  
Natalya A. Popova ◽  
N.A. Koneva
Keyword(s):  
Electron Microscopy ◽  
Phase Composition ◽  
High Temperature ◽  
High Temperature Annealing ◽  
Two Phase ◽  
Σ Phase ◽  
Transmission Electron ◽  
Anisotropic Structures ◽  
Δ Phase ◽  
Nickel Based Alloy

The present study was conducted by transmission electron microscopy (TEM) in order to investigate the structure of multicomponent nickel-based alloy obtained by directional solidification and change in its phase composition at high-temperature annealing. All states of the alloy possessed monocrystalline structure with [001] orientation. The alloy under study contained other elements apart from Ni, such as: Al, Co, and also Mo, Cr, W, Ta, Re, and Ru. The alloy was investigated in three states after annealing for: 1) 118 h; 2) 372 h; 3) 1274 h at 1000°С. The basic phases that form the alloy were γ and γ′. In the state after annealing for 118 h Al6(Re,Ru) phase was observed in an insignificant amount. After longer high temperature annealing new phases occurred, such as σ-phase and δ-phase, Laves phase. The structures occurring during annealing can be classified into four types: 1) quasi-cuboids, 2) anisotropic stripe structures, 3) anisotropic structures of striped type with σ-phase separation, 4) structureless zones with large two-phase areas.

Dislocations in alumina deformed by prismatic slip

1978 ◽  
Vol 36 (1) ◽  
pp. 606-607
Author(s):  
J. Cadoz ◽  
J. Castaing ◽  
J. Philibert
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Basal Slip ◽  
Prismatic Slip ◽  
Compression Tests ◽  
Thin Sections ◽  
Burgers Vector ◽  
Maximum Deformation ◽  
Transmission Electron ◽  
Mechanical Thinning

Plastic deformation of alumina has been much studied; basal slip occurs and dislocation structures have been investigated by transmission electron microscopy (T.E.M.) (1). Non basal slip has been observed (2); the prismatic glide system <1010> {1210} has been obtained by compression tests between 1400°C and 1800°C (3). Dislocations with <0110> burgers vector were identified using a 100 kV microscope(4).We describe the dislocation structures after prismatic slip, using high voltage T.E.M. which gives much information.Compression tests were performed at constant strainrate (∿10-4s-1); the maximum deformation reached was 0.03. Thin sections were cut from specimens deformed at 1450°C, either parallel to the glide plane or perpendicular to the glide direction. After mechanical thinning, foils were produced by ion bombardment. Details on experimental techniques can be obtained through reference (3).

scholarly journals Revisiting the Bøggild Intergrowth in Iridescent Labradorite Feldspars: Ordering, Kinetics, and Phase Equilibria

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 727
Author(s):  
Shiyun Jin ◽  
Huifang Xu ◽  
Seungyeol Lee
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atom Probe ◽  
Phase Region ◽  
Two Phase ◽  
Subsolidus Phase ◽  
Plagioclase Feldspar ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission

The enigmatic Bøggild intergrowth in iridescent labradorite crystals was revisited in light of recent work on the incommensurately modulated structures in the intermediated plagioclase. Five igneous samples and one metamorphic labradorite sample with various compositions and lamellar thicknesses were studied in this paper. The lamellar textures were characterized with conventional transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). The compositions of individual lamellae were analyzed with high-resolution energy-dispersive X-ray spectroscopy (EDS) mapping and atom probe tomography (APT). The average structure states of the studied samples were also compared with single-crystal X-ray diffraction data (SC-XRD). The Na-rich lamellae have a composition of An44–48, and the Ca-rich lamellae range from An56 to An63. Significant differences between the lamellar compositions of different samples were observed. The compositions of the Bøggild intergrowth do not only depend on the bulk compositions, but also on the thermal history of the host rock. The implications on the subsolidus phase relationships of the plagioclase feldspar solid solution are discussed. The results cannot be explained by a regular symmetrical solvus such as the Bøggild gap, but they support an inclined two-phase region that closes at low temperature.

Effect of Coupled Conditions of Thermal Cycle and Dump Environment on Conductivity of 5mol% Yttria Stabilized Zirconia

2013 ◽  
Vol 591 ◽  
pp. 245-248 ◽  
Author(s):  
Jin Feng Xia ◽  
Hong Qiang Nian ◽  
Tao Feng ◽  
Hai Fang Xu ◽  
Dan Yu Jiang
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
High Temperature ◽  
Thermal Cycle ◽  
Oxygen Sensor ◽  
Yttria Stabilized Zirconia ◽  
Cyclic Change ◽  
Stabilized Zirconia ◽  
Transmission Electron

In some applications such as automotive oxygen sensor, 5mol% Y2O3stabilized zirconia (5YSZ) is generally used because it has both excellent ionic conductivity and mechanical properties. The automotive oxygen sensor would experience a cyclic change from high temperature (engine running) environment to the low temperature damp environment (in the tail pipe when vehicle stops). The conductivity change with coupled conditions of thermal cycle and dump environment in the 5mol%Y2O3ZrO2(5YSZ) system was examined by XRD,Impedance spectroscopy and transmission electron microscopy (SEM) in this paper.

scholarly journals Growth of oxide particles in FeCrAl- oxide dispersion strengthened steels at high temperature

2017 ◽  
Vol 493 ◽  
pp. 180-188 ◽  
Author(s):  
N.H. Oono ◽  
S. Ukai ◽  
S. Hayashi ◽  
S. Ohtsuka ◽  
T. Kaito ◽  
...  
Keyword(s):  
High Temperature ◽  
Oxide Dispersion Strengthened ◽  
Oxide Dispersion ◽  
Oxide Particles

Investigation of low- and high-resistance Ni–Ge–Au ohmic contacts to n+ GaAs using electron microbeam and surface analytical techniques

1996 ◽  
Vol 11 (5) ◽  
pp. 1244-1254 ◽  
Author(s):  
Nancy E. Lumpkin ◽  
Gregory R. Lumpkin ◽  
K. S. A. Butcher
Keyword(s):  
Electron Microscopy ◽  
Ohmic Contacts ◽  
Analytical Electron Microscopy ◽  
Depth Profiling ◽  
Analytical Techniques ◽  
Two Phase ◽  
Low Resistance ◽  
Fine Grained ◽  
Multiphase Microstructure ◽  
Transmission Electron

A process for the formation of low-resistance Ni–Ge–Au ohmic contacts to n+ GaAs has been refined using multivariable screening and response surface experiments. Samples from the refined, low-resistance process (which measure 0.05 ± 0.02 Ω · mm) and the unrefined, higher resistance process (0.17 ± 0.02 Ω · mm) were characterized using analytical electron microscopy (AEM), transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and x-ray photoemission spectroscopy (XPS) depth profiling methods. This approach was used to identify microstructural differences and compare them with electrical resistance measurements. Analytical results of the unrefined ohmic process sample reveal a heterogeneous, multiphase microstructure with a rough alloy-GaAs interface. The sample from the refined ohmic process exhibits an alloy which is homogeneous, smooth, and has a fine-grained microstructure with two uniformly distributed phases. XPS analysis for the refined ohmic process sample indicates that the Ge content is relatively depleted in the alloy (relative to the deposited Ge amount) and enriched in the GaAs. This is not evidenced in the unrefined ohmic process sample. Our data lead us to conclude that a smooth, uniform, two-phase microstructure, coupled with a shift in Ge content from the post-alloy metal to the GaAs, is important in forming low-resistance ohmic contacts.

In Situ High-Temperature Transmission Electron Microscopy Observations of the Formation of Nanocrystalline TiC from Nanocrystalline Anatase (TiO2)

1998 ◽  
Vol 4 (3) ◽  
pp. 269-277 ◽  
Author(s):  
A. Agrawal ◽  
J. Cizeron ◽  
V.L. Colvin
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Temperature ◽  
Solid Phase ◽  
Anatase Phase ◽  
High Resolution Electron Microscopy ◽  
Rutile Phase ◽  
Transmission Electron ◽  
New Phase

In this work, the high-temperature behavior of nanocrystalline TiO2 is studied using in situ transmission electron microscopy (TEM). These nanoparticles are made using wet chemical techniques that generate the anatase phase of TiO2 with average grain sizes of 6 nm. X-ray diffraction studies of nanophase TiO2 indicate the material undergoes a solid-solid phase transformation to the stable rutile phase between 600° and 900°C. This phase transition is not observed in the TEM samples, which remain anatase up to temperatures as high as 1000°C. Above 1000°C, nanoparticles become mobile on the amorphous carbon grid and by 1300°C, all anatase diffraction is lost and larger (50 nm) single crystals of a new phase are present. This new phase is identified as TiC both from high-resolution electron microscopy after heat treatment and electron diffraction collected during in situ heating experiments. Video images of the particle motion in situ show the nanoparticles diffusing and interacting with the underlying grid material as the reaction from TiO2 to TiC proceeds.

Sign in / Sign up

Export Citation Format

Share Document