Increasing surface charge density by effective charge accumulation layer inclusion for high-performance triboelectric nanogenerators

2019 ◽  
Vol 9 (02) ◽  
pp. 682-689 ◽  
Author(s):  
Aravind Narain Ravichandran ◽  
Marc Ramuz ◽  
Sylvain Blayac
Keyword(s):  
Charge Density ◽  
Surface Charge ◽  
Effective Charge ◽  
Surface Charge Density ◽  
High Performance ◽  
Charge Accumulation ◽  
Accumulation Layer ◽  
Triboelectric Nanogenerators ◽  
Image Position

Abstract

scholarly journals High-Performance Triboelectric Devices via Dielectric Polarization: A Review

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Minsoo P. Kim ◽  
Doo-Seung Um ◽  
Young-Eun Shin ◽  
Hyunhyub Ko
Keyword(s):  
Dielectric Constant ◽  
Charge Density ◽  
Surface Charge ◽  
Surface Charge Density ◽  
High Performance ◽  
Critical Factor ◽  
Relative Dielectric Constant ◽  
Interfacial Polarization ◽  
Surface Functional Group ◽  
Dielectric Polarization

AbstractEnergy harvesting devices based on the triboelectric effect have attracted great attention because of their higher output performance compared to other nanogenerators, which have been utilized in various wearable applications. Based on the working mechanism, the triboelectric performance is mainly proportional to the surface charge density of the triboelectric materials. Various approaches, such as modification of the surface functional group and dielectric composition of the triboelectric materials, have been employed to enhance the surface charge density, leading to improvements in triboelectric performances. Notably, tuning the dielectric properties of triboelectric materials can significantly increase the surface charge density because the surface charge is proportional to the relative permittivity of the triboelectric material. The relative dielectric constant is modified by dielectric polarization, such as electronic, vibrational (or atomic), orientation (or dipolar), ionic, and interfacial polarization. Therefore, such polarization represents a critical factor toward improving the dielectric constant and consequent triboelectric performance. In this review, we summarize the recent insights on the improvement of triboelectric performance via enhanced dielectric polarization.

Surface charge density of triboelectric nanogenerators: Theoretical boundary and optimization methodology

2020 ◽  
Vol 18 ◽  
pp. 100496 ◽  
Author(s):  
Chunlei Zhang ◽  
Linglin Zhou ◽  
Ping Cheng ◽  
Xing Yin ◽  
Di Liu ◽  
...  
Keyword(s):  
Charge Density ◽  
Surface Charge ◽  
Surface Charge Density ◽  
Optimization Methodology ◽  
Triboelectric Nanogenerators

scholarly journals Understanding the Percolation Effect in Triboelectric Nanogenerator with Conductive Intermediate Layer

Research ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Binbin Zhang ◽  
Guo Tian ◽  
Da Xiong ◽  
Tao Yang ◽  
Fengjun Chun ◽  
...  
Keyword(s):  
Dielectric Permittivity ◽  
Charge Density ◽  
Surface Charge ◽  
Intermediate Layer ◽  
Surface Charge Density ◽  
Polyvinylidene Fluoride ◽  
High Performance ◽  
Triboelectric Nanogenerator ◽  
Percolation Effect ◽  
Pure Pvdf

Introducing the conductive intermediate layer into a triboelectric nanogenerator (TENG) has been proved as an efficient way to enhance the surface charge density that is attributed to the enhancement of the dielectric permittivity. However, far too little attention has been paid to the companion percolation, another key element to affect the output. Here, the TENG with MXene-embedded polyvinylidene fluoride (PVDF) composite film is fabricated, and the dependence of the output capability on the MXene loading is investigated experimentally and theoretically. Specifically, the surface charge density mainly depends on the dielectric permittivity at lower MXene loadings, and in contrast, the percolation becomes the degrading factor with the further increase of the conductive loadings. At the balance between the dielectric and percolation properties, the surface charge density of the MXene-modified TENG obtained 350% enhancement compared to that with the pure PVDF. This work shed new light on understanding the dielectric and percolation effect in TENG, which renders a universal strategy for the high-performance triboelectronics.

Manipulating the triboelectric surface charge density of polymers by low-energy helium ion irradiation/implantation

2020 ◽  
Vol 13 (3) ◽  
pp. 896-907 ◽  
Author(s):  
Shuyao Li ◽  
Yong Fan ◽  
Huaqiang Chen ◽  
Jinhui Nie ◽  
Yanxia Liang ◽  
...  
Keyword(s):  
Charge Density ◽  
Surface Charge ◽  
Effective Charge ◽  
Surface Charge Density ◽  
Ion Irradiation ◽  
Low Energy ◽  
Helium Ion ◽  
Electron Donating Groups

Modification of polymers by ion irradiation improves their effective charge density due to the generation of electron-donating groups.

scholarly journals Research on Controlling Contact Electrification by Modification of Cellulose Molecule Surface with Amino Group

2021 ◽  
Author(s):  
Sheng Zhang ◽  
Qiuxiao Zhu ◽  
Tingting Wang ◽  
Xuchong Wang ◽  
Xiaoping Sun ◽  
...  
Keyword(s):  
Charge Density ◽  
Surface Charge ◽  
Surface Charge Density ◽  
Output Voltage ◽  
Green Material ◽  
Contact Electrification ◽  
Triboelectric Nanogenerators ◽  
Cellulose Surface ◽  
Weak Contact ◽  
Molecule Surface

Abstract As a green material, cellulose is widely used in friction triboelectric nanogenerators (TENGs). However, the weak polarity of the cellulose surface leads to its weak contact electrification performance, which is not conducive to its utilization in TENGs. In this study, epoxy chloropropane and ethylenediamine were grafted onto cellulose to form paper and were assembled with an FEP film. The output voltage, current, and surface charge density were 34.9%, 26.7%, and 16.7% higher than those of ordinary paper, respectively. When 20% nano TiO2 filler was added to the paper made from amino-modified cellulose, the output voltage, current, and surface charge density of the TENG increased by 70.9%, 226.7%, and 122.2%, respectively, compared with ordinary paper. As the air humidity of the TENG increased from 60% to 90%, the output voltage, current, and surface charge density were maintained at 53.7%, 38.9%, and 61.0%, respectively. When a 5 × 107 Ω resistor was connected to the working circuit, its output power reached 13.78 μ W·cm2. This showed that cellulose as a green material has wide application prospects in the field of TENG.

scholarly journals High performance temperature difference triboelectric nanogenerator

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Bolang Cheng ◽  
Qi Xu ◽  
Yaqin Ding ◽  
Suo Bai ◽  
Xiaofeng Jia ◽  
...  
Keyword(s):  
High Temperature ◽  
Charge Density ◽  
Surface Charge ◽  
Temperature Difference ◽  
Surface Charge Density ◽  
High Performance ◽  
Thermionic Emission ◽  
Triboelectric Nanogenerator ◽  
Output Performance ◽  
Record Value

AbstractUsually, high temperature decreases the output performance of triboelectric nanogenerator because of the dissipation of triboelectric charges through the thermionic emission. Here, a temperature difference triboelectric nanogenerator is designed and fabricated to enhance the electrical output performance in high temperature environment. As the hotter friction layer’s temperature of nanogenerator is 0 K to 145 K higher than the cooler part’s temperature, the output voltage, current, surface charge density and output power are increased 2.7, 2.2, 3.0 and 2.9 times, respectively (from 315 V, 9.1 μA, 19.6 μC m−2, 69 μW to 858 V, 20 μA, 58.8 μC m−2, 206.7 μW). With the further increase of temperature difference from 145 K to 219 K, the surface charge density and output performance gradually decrease. At the optimal temperature difference (145 K), the largest output current density is 443 μA cm−2, which is 26.6% larger than the reported record value (350 μA cm−2).

Sign in / Sign up

Export Citation Format

Share Document