Microstructures and mechanical properties of AZ91 alloys prepared by multi-pass friction stir processing

2018 ◽  
Vol 33 (12) ◽  
pp. 1789-1796 ◽  
Author(s):  
Fang Chai ◽  
Fei Yan ◽  
Wei Wang ◽  
Qichen Lu ◽  
Xiang Fang
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Processing ◽  
Friction Stir ◽  
Microstructures And Mechanical Properties ◽  
Image Position

Abstract

Friction Stir Processing (FSP) of Cast Metals: Microstructure – Property Relationships in NiAl Bronze and AA5083

2010 ◽  
Vol 638-642 ◽  
pp. 35-40
Author(s):  
Terry R. McNelley ◽  
Srinivasan Swaminathan ◽  
E. Sarath Menon ◽  
J.Q. Su
Keyword(s):  
Mechanical Properties ◽  
Ambient Temperature ◽  
Friction Stir Processing ◽  
Elevated Temperatures ◽  
Stir Zone ◽  
Friction Stir ◽  
Grain Structures ◽  
Microstructures And Mechanical Properties ◽  
Step Over ◽  
Equiaxed Grain

Parameters for multi-pass FSP include the pattern of tool traverse and step-over distance between successive passes. Multi-pass FSP was conducted on as-cast NiAl bronze and as-cast AA5083 in order to modify stir zone (SZ) microstructures and mechanical properties. Highly refined and homogeneous SZ microstructures may be produced by FSP. Refined and equiaxed grain structures reflect recrystallization during FSP; mechanisms leading to homogenization by redistribution of microstructure constituents remain to be determined. Refined microstructures exhibit enhanced ambient-temperature properties and superplasticity at elevated temperatures.

scholarly journals Effect of friction stir processing on microstructures and mechanical properties of TIG cladding layer on AA7075

2021 ◽  
Author(s):  
Chao Shi ◽  
Chao Liu ◽  
Kaizhen Zhu
Keyword(s):  
Mechanical Properties ◽  
Tensile Properties ◽  
Friction Stir Processing ◽  
Rotational Speed ◽  
Traverse Speed ◽  
Stir Zone ◽  
Elemental Distribution ◽  
Friction Stir ◽  
Cladding Layer ◽  
Microstructures And Mechanical Properties

Abstract AA7075 is a precipitation strengthened Al-Zn-Mg-Cu alloy which has been widely used. As a common way to repair AA7075 components, tungsten inert gas (TIG) cladding generates coarse grains and defects. In addition, the use of other types of filler wires could lead to insufficient rigidity and strength of the cladding layer. In the present work, friction stir processing (FSP) has been applied to the TIG cladding layer on AA7075 to study the effect of process parameters on microstructures and mechanical properties. The macro/micro structural characteristics, elemental distribution, microhardness distribution and tensile properties have been investigated. The macroscopic defects in TIG cladding layer are eliminated and the size of grains is decreases to around 6 μm by FSP. FSP reduces the compositional difference between the stir zone and the base material. Higher rotational speed promotes the grain refinement while the lower traverse speed benefits the microstructural uniformity. FSP on the TIG weld bead brings improvement in tensile properties and hardness. All the fractures for TIG+FSP samples occur at thermo-mechanically affected zone of the advancing side. The tensile strength of the stir zone increases from 424.2 to 442.8 MPa with the increase in rotational speed and traverse speed.

Microstructures and Mechanical Properties of AA6061-T4 Composites Containing SiC and B4C Particles Fabricated by Friction Stir Processing

2020 ◽  
Vol 12 (4) ◽  
pp. 531-537 ◽  
Author(s):  
Hyun-Joon Park ◽  
Byung-Wook Ahn ◽  
Jae-Ha Kim ◽  
Jong-Gun Lee ◽  
Seung-Boo Jung
Keyword(s):  
Mechanical Properties ◽  
Electron Microscope ◽  
Friction Stir Processing ◽  
Vickers Hardness ◽  
Charpy Impact ◽  
Hardness Test ◽  
Charpy Impact Test ◽  
Ceramic Particles ◽  
Friction Stir ◽  
Microstructures And Mechanical Properties

AA6061-T4 composites containing SiC and B4C particles were fabricated by friction stir processing (FSP) with an SKD11 tool. The microstructures and mechanical properties of the composites were investigated with various test methods. With the inclusion of ceramic particles, refined grains in the stir zone (SZ) were observed using a scanning electron microscope (SEM) and tunneling electron microscope (TEM). Because the ceramic particles facilitated grain refinement in the SZ via the pinning effect, the SZ with the particles had a much smaller grain size than the SZ without the particles. Vickers hardness test, tensile test and Charpy impact test were conducted to evaluate the mechanical properties. Mechanical properties of the SZ with the ceramic particles were improved relative to those of the SZ without the particles. Vickers hardness (from 50 to 90 HV), tensile strength (from 117 to 253 MPa) and Charpy impact absorbed energy (from 4.2 to 5.6 J) of the SZ increased with the addition of ceramic particles.

Sign in / Sign up

Export Citation Format

Share Document