Effect of cooling rate on growth and transformation of primary Mg2Si in Al–Mg2Si in situ composites

2018 ◽  
Vol 33 (20) ◽  
pp. 3458-3465 ◽  
Author(s):  
Dongtao Wang ◽  
Haitao Zhang ◽  
Cheng Guo ◽  
Hailin Wu ◽  
Jianzhong Cui
Keyword(s):  
Cooling Rate ◽  
In Situ Composites ◽  
Primary Mg2si ◽  
Image Position

Abstract

scholarly journals Elevated-temperature wear behaviors of NiMo/Mo2Ni3Si intermetallic “in situ” composites

2015 ◽  
Vol 31 (1) ◽  
pp. 66-75 ◽  
Author(s):  
Yongliang Gui ◽  
Chunyan Song ◽  
Shuhuan Wang ◽  
Dingguo Zhao
Keyword(s):  
Elevated Temperature ◽  
In Situ Composites ◽  
Image Position

Abstract

scholarly journals Shear-Induced and Nanofiber-Nucleated Crystallization of Novel Aliphatic–Aromatic Copolyesters Delineated for In Situ Generation of Biodegradable Nanocomposites

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2315
Author(s):  
Ramin Hosseinnezhad
Keyword(s):  
Shear Rate ◽  
Cooling Rate ◽  
Isothermal Crystallization ◽  
Cellulose Nanofibers ◽  
Crystallization Time ◽  
Nucleation Density ◽  
Shear Rates ◽  
Biodegradable Nanocomposites ◽  
In Situ Generation

The shear-induced and cellulose-nanofiber nucleated crystallization of two novel aliphatic–aromatic copolyesters is outlined due to its significance for the in situ generation of biodegradable nanocomposites, which require the crystallization of nanofibrous sheared inclusions at higher temperatures. The shear-induced non-isothermal crystallization of two copolyesters, namely, poly(butylene adipate-co-succinate-co-glutarate-co-terephthalate) (PBASGT) and poly(butylene adipate-co-terephthalate) (PBAT), was studied following a light depolarization technique. To have a deep insight into the process, the effects of the shear rate, shear time, shearing temperature and cooling rate on the initiation, kinetics, growth and termination of crystals were investigated. Films of 60 μm were subjected to various shear rates (100–800 s−1) for different time intervals during cooling. The effects of the shearing time and increasing the shear rate were found to be an elevated crystallization temperature, increased nucleation density, reduced growth size of lamella stacks and decreased crystallization time. Due to the boosted nucleation sites, the nuclei impinged with each other quickly and growth was hindered. The effect of the cooling rate was more significant at lower shear rates. Shearing the samples at lower temperatures, but still above the nominal melting point, further shifted the non-isothermal crystallization to higher temperatures. As a result of cellulose nanofibers’ presence, the crystallization of PBAT, analyzed by DSC, was shifted to higher temperatures.

scholarly journals Microcantilever Fracture Tests on Eutectic NiAl–Cr(Mo) In Situ Composites

2021 ◽  
pp. 2001464
Author(s):  
Stefan Gabel ◽  
Sven Giese ◽  
Benoit Merle ◽  
Ioannis Sprenger ◽  
Martin Heilmaier ◽  
...  
Keyword(s):  
In Situ Composites ◽  
Fracture Tests

Manufacture and Microstructures of Fe-Cr-C Hypereutectic In Situ Composites

2007 ◽  
Vol 336-338 ◽  
pp. 1406-1408 ◽  
Author(s):  
Xiao Hui Zhi ◽  
Jian Dong Xing ◽  
Yi Min Gao ◽  
Xiao Jun Wu ◽  
Xiao Le Cheng
Keyword(s):  
Hypereutectic Alloy ◽  
Reinforced Composites ◽  
In Situ Composites ◽  
In Situ Composite ◽  
Particle Reinforced Composites ◽  
Primary Carbides

In the present study, a Fe-Cr-C hypereutectic alloy was prepared from industry-grade materials and subjected to modification and fluctuation, through which new types of particle reinforced composites, hypereutectic in-situ composite, was generated. The structures of the composite modified or not with the range of fluctuation addition from 0% to 2.8wt.%, were investigated. The primary carbides were refined with the addition of modifying agents and fluctuations. Increasing the amount of fluctuation resulted in finer primary carbides. At 1380oC, with the addition of modifying agents and 2.8wt.% fluctuation addition, the structure was well modified.

Cooling rate dependent undercooling of Bi in a Zn matrix by differential fast scanning calorimetry

2014 ◽  
Vol 30 (2) ◽  
pp. 242-247 ◽  
Author(s):  
Linfang Li ◽  
Bingge Zhao ◽  
Bin Yang ◽  
Quanliang Zhang ◽  
Qijie Zhai ◽  
...  
Keyword(s):  
Cooling Rate ◽  
Scanning Calorimetry ◽  
Rate Dependent ◽  
Fast Scanning Calorimetry ◽  
Image Position

Abstract

Sign in / Sign up

Export Citation Format

Share Document