Analysis of effects of reactant particle size on phase transformations in the Ti–Si–Cu system using differential thermal analysis and x-ray diffraction

2012 ◽  
Vol 27 (20) ◽  
pp. 2615-2623
Author(s):  
Si-Jie Lü ◽  
Hui-Yuan Wang ◽  
Zhi-Zheng Yang ◽  
Qi-Chuan Jiang
Keyword(s):  
Thermal Analysis ◽  
Particle Size ◽  
Differential Thermal Analysis ◽  
Phase Transformations ◽  
X Ray Diffraction ◽  
X Ray ◽  
Image Position

Abstract

Thermal Analysis and Evolution of Phases during the Synthesis of Cordierite with Kyanite and Talc

2006 ◽  
Vol 509 ◽  
pp. 199-204
Author(s):  
Iván Vernet-Patiño ◽  
Heberto Balmori-Ramírez ◽  
Richard C. Bradt
Keyword(s):  
Thermal Analysis ◽  
Particle Size ◽  
Differential Thermal Analysis ◽  
Phase Changes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Phase

Cordierite has been synthesized by heating mixtures of kyanite and talc, using kyanite powders of two different sizes. The reaction is studied by thermogravimetric and differential thermal analysis. Phase changes are followed by X-Ray diffraction of samples fired between 750 °C and 1400 °C. The evolution of the reaction starts with the dehydration of talc at approximately 880 °C. The kyanite decomposes at approximately 1140 °C. The first traces of α-cordierite appear at around 1200 °C. The influence of the kyanite particle size on the kinetics and microstructure is analyzed.

scholarly journals Crystallization kinetics of K2O·TiO2·3GeO2 glass studied by DTA

2008 ◽  
Vol 40 (3) ◽  
pp. 333-338 ◽  
Author(s):  
S. Grujic ◽  
N. Blagojevic ◽  
M. Tosic ◽  
V. Zivanovic ◽  
J. Nikolic
Keyword(s):  
Activation Energy ◽  
Thermal Analysis ◽  
Particle Size ◽  
Differential Thermal Analysis ◽  
Crystallization Kinetics ◽  
Crystallization Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Samples ◽  
Kinetics Of

Crystallization kinetics of K2O?TiO2?3GeO2 glass was investigated by differential thermal analysis (DTA). Experiments were performed on powder samples with a particle size < 0.037 mm. The glass samples were heated at different rates in the temperature range 20-750?C. The kinetic parameters, activation energy for the crystallization process, Ec and Avrami exponent, n were calculated. Powder X-ray diffraction analysis (XRD) of crystallized glass reveals the presence of crystalline K2O?TiO2?3GeO2 indicating polymorphic crystallization with interface controlled crystal growth.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals The Potential for Natural Stones from Northeastern Brazil to Be Used in Civil Construction

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 440
Author(s):  
Fabiana Pereira da Costa ◽  
Jucielle Veras Fernandes ◽  
Luiz Ronaldo Lisboa de Melo ◽  
Alisson Mendes Rodrigues ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Resistance ◽  
Mechanical Analysis ◽  
Northeastern Brazil ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Agents ◽  
Natural Stones

Natural stones (limestones, granites, and marble) from mines located in northeastern Brazil were investigated to discover their potential for use in civil construction. The natural stones were characterized by chemical analysis, X-ray diffraction, differential thermal analysis, and optical microscopy. The physical-mechanical properties (apparent density, porosity, water absorption, compressive and flexural strength, impact, and abrasion) and chemical resistance properties were also evaluated. The results of the physical-mechanical analysis indicated that the natural stones investigated have the potential to be used in different environments (interior, exterior), taking into account factors such as people’s circulation and exposure to chemical agents.

The Roman Ceramics of Salobrena (Granada-Spain) and their Raw Materials

1992 ◽  
Vol 267 ◽  
Author(s):  
Ana M De Andres ◽  
Isabel MuÑOZ
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Raw Materials ◽  
Third Century ◽  
Western Coast ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Good Number ◽  
Scanning Electron

ABSTRACTNineteen roman ceramic sherds found near Salobreña (Granada, Spain), in the western coast of the Mediterranean Sea, as well as different ceramic clays from the surroundingsare studied. Both clays and ceramic sherds are characterizad by X-ray diffraction and spectrometry, differential thermal analysis, and scanning electron and optical microscopies. A good number of the ceramic pieces, among which some “Terrae Sigillatae”, have a composition similar to that of the local clays and, thus, have been probably manufactured at Salobreña. Only a few of them have a foreign origin. For most of them, the firing temperature was about 800-850 °C, although some have been produced at 900-1000 °C, and some others at 1000-1100 °C. It is concluded that Salobreña appearsto have been an important settlement just in the third century of the Christian era.

scholarly journals Influence of the Al content on the phase transformations in Cu-Al-Ag alloys

2003 ◽  
Vol 28 (1) ◽  
pp. 33-38 ◽  
Author(s):  
A. T. Adorno ◽  
A. V. Benedetti ◽  
R. A. G. da Silva ◽  
M. Blanco
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Transition Temperature ◽  
Phase Transformations ◽  
Decomposition Reaction ◽  
Phase Decomposition ◽  
Stability Range ◽  
X Ray ◽  
Al Content ◽  
The Stability

The influence of the Al content on the phase transformations in Cu-Al-Ag alloys was studied by classical differential thermal analysis (DTA), optical microscopy (OM) and X-ray diffractometry (XRD). The results indicated that the increase in the Al content and the presence of Ag decrease the rate of the <FONT FACE=Symbol>b</font>1 phase decomposition reaction and contribute for the raise of this transition temperature, thus decreasing the stability range of the perlitic phase resulted from the b1 decomposition reaction.

scholarly journals Silica-Kaolin Mix Effect on Evaporative Pattern Castings Surface Roughness

2016 ◽  
Vol 16 (3) ◽  
pp. 83-88 ◽  
Author(s):  
B.V. Omidiji ◽  
R.H. Khan ◽  
M.S. Abolarin
Keyword(s):  
Thermal Analysis ◽  
Surface Roughness ◽  
Differential Thermal Analysis ◽  
Ratio Method ◽  
Gating System ◽  
X Ray Diffraction ◽  
Pouring Temperature ◽  
Material Loss ◽  
Refractory Coating ◽  
X Ray

Abstract The influence of the refractory coating which is a mixture of silica flour and kaolin on the surface roughness of the plate castings produced using evaporative patterns had been considered in this work. The kaolin was used as a binder and ratio method was employed to form basis for the factorial design of experiment which led to nine runs of experiments. Methyl alcohol at 99% concentration was used as the carrier for the transfer of the coating to the surface of the patterns. Pouring temperature was observed as a process parameter alongside the mix ratios of the coating. Attempts were made to characterize the refractory coating by using two methods; differential thermal analysis (DTA) and X-ray diffraction. Attempt was also made to characterize the casting material. Gating system design was done for the plate casting to determine the correct proportions of the gating parameters in order to construct the gating system properly to avoid turbulence during pouring of liquid metal. A digital profilometer was used to take the measurements of the surface roughness. It was observed that the mix ratio 90% silica flour-10% kaolin produced the lowest value of the surface roughness of the plate castings and had the lowest material loss in the DTA test. The pouring temperature of 650°C produced best casting.

scholarly journals SOLUBILITY OF GERMANIUM DISELENIDE IN THE Cu3AsSe4

2021 ◽  
Vol 0 (4) ◽  
pp. 67-70
Author(s):  
Z.T. Hasanova ◽  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Phase Equilibria ◽  
Solid Solutions ◽  
X Ray Diffraction ◽  
X Ray

Differential thermal analysis and powder X-ray diffraction methods were used for phase equilibria studying in the Cu3AsSe4-GeSe2 system. It was established that wide (up to 30 mol.%) solid solutions based on Cu3AsSe4 are formed. GeSe2-rich alloys consist of various heterogeneous mixtures, including phases outside the T–x plane of this section

The (AgInSe2)1-x(VSe)x system (0 ≤x ≤ 0.5): X-ray diffraction and differential thermal analysis measurements

2005 ◽  
Vol 2 (10) ◽  
pp. 3766-3769 ◽  
Author(s):  
S. Durán ◽  
P. Grima ◽  
M. Muñoz ◽  
M. Quintero ◽  
J. Ruiz ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
X Ray Diffraction ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document