Influence of strain rate on the mechanical behavior of cortical bone interstitial lamellae at the micrometer scale

2006 ◽  
Vol 21 (8) ◽  
pp. 2093-2097 ◽  
Author(s):  
Maximilien Vanleene ◽  
Pierre-Emmanuel Mazeran ◽  
Marie-Christine Ho Ba Tho

Investigations of bone mechanical properties are of major importance for bone pathology research, biomaterials, and development of in vivo bone characterization devices. Because of its complex multiscale structure, assessment of bone microstructure is an important step for understanding its mechanical behavior. In this study, we have investigated the strain rate influence on the mechanical properties of interstitial lamellae on two human femur bone samples. Nanoindentation tests were performed with the continuous stiffness measurement technique. Young's modulus and hardness were calculated using the Oliver and Pharr method. A statistical significant influence of strain rate on hardness was found (p < 0.05) showing a viscoplastic behavior of interstitial bone at the micrometer scale. This phenomenon may reflect the role of the organic component in the bone matrix mechanical behavior.

Author(s):  
Barbara J. Murienne ◽  
C. Thao D. Nguyen

Changes in sclera mechanical properties have been shown to play an important role in ocular diseases such as glaucoma 1,2,3 and myopia 4,5. In both diseases, those changes in mechanical behavior were observed along with changes in proteoglycan (PG) and associated glycosaminoglycan (GAG) levels, which have been shown to significantly influence the viscoelastic behavior of other tissues 6.


Blood ◽  
2008 ◽  
Vol 112 (11) ◽  
pp. 3184-3184 ◽  
Author(s):  
Asumi Yokota ◽  
Shinya Kimura ◽  
Ruriko Tanaka ◽  
Rina Nagao ◽  
Kazuki Sakai ◽  
...  

Abstract We have previously reported that zoledoronic acid (ZOL) augmented the in vivo effect of imatinib in a murine chronic myeloid leukemia (CML) model (Blood 2003). ZOL alone induces apoptosis in leukemic cells in vitro by inhibiting prenylation of the Ras-related proteins. In addition to this direct anti-leukemic effect, we hypothesized that ZOL also has some influence in leukemic cells in vivo indirectly by destroying osteoclasts (OCs), which is the primary therapeutic activity of ZOL in osteoporosis patients. Supporting this notion is that by mediating bone resorption, OCs release a variety of cytokines such as IGF- 1, TGF-β, etc. that have accumulated in the bone matrix. It has been reported that OCs play an important role in bone metastasis of solid tumor, especially in cancer stem cells. However, little is known about the role of OCs in leukemia. Therefore, we investigated it in vitro and in vivo. For this purpose, we established an in vitro osteoblasts (OBs) and OCs co-culture system. The stable co-culture system that we developed includes collagen gel and murine primary OBs and OCs. In addition, murine femoral bone sections were sometimes added to this culture system so that the OCs could release the cytokines from the bone matrix. Thus, the collagen gel and OBs were placed in 12-well plates with and without bone sections and/or OCs. The transwell chambers over the wells then received 1×104 Ba/F3 cells that had been transfected with wild type bcr-abl (Ba/F3/bcr-abl cells). OBs markedly enhanced the growth of Ba/F3/bcr-abl cells in this indirect contact coculture system whereas the presence of both OBs and OCs slightly suppressed cell growth. Intriguingly, when bone sections were added (OBs+OCs+bone), Ba/F3/bcr-abl cell proliferation was significantly suppressed compared to the effect of OBs alone or OBs+OCs (Figure). Cell cycle analysis revealed that the G0/G1 population was increased in Ba/F3/bcr-abl cells co-cultured with OBs+OCs+bones. We also observed that the p27 protein levels of Ba/F3/bcr-abl cells increased upon co-culture with OCs or OCs+bones, similar to their response to treatment with purified TGF-β. We performed ELISAs to determine the concentrations of cytokines in the supernatants of co-cultured OBs and OCs. There were higher levels of TGF-β1 in the OBs+OCs+bones supernatant than in the OBs+OCs supernatant. Furthermore, OBs produced high levels of IGF-1. These findings suggest that OBs and OCs affect the proliferation and the cell cycle arrest of leukemic cells by releasing soluble factors, respectively. To more comprehensively elucidate the roles OCs play in leukemia cells in vivo, we used reveromycin A (RM-A) which inhibits bone resorption by specifically inducing apoptosis in OCs (Woo et al, PNAS 2006). RM-A did not have any in vitro effects on the proliferation of Ba/F3/bcr-abl cells. Thus, we could know the unalloyed role of OCs in leukemia with RM-A compared with ZOL which inhibited directly both OCs and leukemic cells. Our preliminary data show that RM-A suppresses the engraftment of inoculated Ba/F3/bcr-abl cells to nude mice. We also present data from ongoing studies showing the effect of RM-A on leukemic cells in murine models. These findings suggested that OCs may be an important constituent of leukemia stem cell niche and destruction of OCs by either ZOL or RM-A is a novel strategy for leukemia treatment. Figure Figure


2019 ◽  
Author(s):  
Christopher D. Kegelman ◽  
Jennifer C. Coulombe ◽  
Kelsey M. Jordan ◽  
Daniel J. Horan ◽  
Ling Qin ◽  
...  

ABSTRACTOsteocytes are bone matrix-entombed cells that form an interconnected network of processes called the lacunar/canalicular system, which enables osteocytes to coordinate bone formation and resorption. Osteocytes indirectly regulate osteoblast and osteoclast activity on bone surfaces but also directly resorb and deposit their surrounding bone matrix through perilacunar/canalicular remodeling. However, the molecular mechanisms by which osteocytes control bone remodeling remain unclear. We previously reported that the transcriptional regulators Yes-associated protein (YAP) and Transcriptional co-activator with PDZ-motif (TAZ) promote bone acquisition in osteoblast-lineage cells. Here, we tested the hypothesis that YAP and TAZ regulate osteocyte-mediated bone remodeling by conditional ablation of both YAP and TAZ from mouse osteocytes using 8kb-DMP1-Cre. Osteocyte conditional YAP/TAZ deletion reduced bone mass and dysregulated matrix collagen content and organization, which together impaired bone mechanical properties. YAP/TAZ deletion reduced osteoblast number and activity and increased osteoclast activity. In addition, YAP/TAZ deletion directly impaired osteocyte lacunar/canalicular network remodeling, reducing canalicular density, length, and branching, but did not alter lacunar size or shape. Further, consistent with recent studies identifying TGF-β signaling as a key inducer of perilacunar/canalicular remodeling through expression of matrix-remodeling enzymes, YAP/TAZ deletion in vivo decreased osteocyte expression of matrix proteases Mmp13, Mmp14, and Cathepsin K. In vitro, pharmacologic inhibition of YAP/TAZ transcriptional activity in osteocyte-like cells abrogated TGF-β-induced protease gene expression. Together, these data show that YAP and TAZ act downstream of TGF-β in osteocytes to control bone matrix accrual, organization, and mechanical properties indirectly by coordinating osteoblast/osteoclast activity and directly by regulating perilacunar/canalicular remodeling.


Author(s):  
Michael I. Dishowitz ◽  
Miltiadis H. Zgonis ◽  
Jeremy J. Harris ◽  
Constance Ace ◽  
Louis J. Soslowsky

Rotator cuff tendon tears often require large tensions for repair [1] and these tensions are associated with poor outcomes including rerupture [2]. To address this, repairs are often augmented with collagen-based scaffolds. Microbial cellulose, produced by A. xylinum as a laminar non-woven matrix, is another candidate for repair augmentation [3]. An ideal augmentation scaffold would shield the repair site from damaging loads as they change throughout the healing process. Although the initial mechanical properties of clinically used scaffolds have been well characterized [4–6], their mechanical behavior following implantation is not known. As a result, the role of these scaffolds throughout the healing process remains unknown. Therefore, the objective of this study is to characterize the mechanical behavior of existing collagen-based scaffolds and a new, microbial cellulose scaffold over time using an in vivo model. We hypothesize that: 1) collagen-based scaffolds will show decreased stiffness (1a) and suture pullout loads (1b) over time when compared to initial values while the microbial cellulose scaffold will not; and 2) the collagen-based scaffolds will have decreased stiffness (2a) and suture pullout loads (2b) when compared to the new, microbial cellulose scaffold at all timepoints.


Author(s):  
Leila Ladani ◽  
Jafar Razmi ◽  
Soud Farhan Choudhury

Anisotropic mechanical behavior is an inherent characteristic of parts produced using additive manufacturing (AM) techniques in which parts are built layer by layer. It is expected that in-plane and out-of-plane properties be different in these parts. E-beam fabrication is not an exception to this. It is, however, desirable to keep this degree of anisotropy to a minimum level and be able to produce parts with comparable mechanical strength in both in-plane and out-of-plane directions. In this manuscript, this degree of anisotropy is investigated for Ti6Al4V parts produced using this technique through tensile testing of parts built in different orientations. Mechanical characteristics such as Young's modulus, yield strength (YS), ultimate tensile strength (UTS), and ductility are evaluated. The strain rate effect on mechanical behavior, namely, strength and ductility, is also investigated by testing the material at a range of strain rates from 10−2 to 10−4 s−1. Local mechanical properties were extracted using nanoindentation technique and compared against global values (average values obtained by tensile tests). Although the properties obtained in this experiment were comparable with literature findings, test results showed that in-plane properties, elastic modulus, YS, and UTS are significantly higher than out-of-plane properties. This could be an indication of defects in between layers or imperfect bonding of the layers. Strong positive strain rate sensitivity was observed in out-of-plane direction. The strain rate sensitivity evaluation did not show strain rate dependency for in-plane directions. Local mechanical properties obtained through nanoindentation confirmed the findings of tensile test and also showed variation of properties caused by geometry.


2019 ◽  
pp. 1-14 ◽  
Author(s):  
Masahiro Kouno ◽  
Tomonobu Ishigaki ◽  
Toshihiro Ikebukuro ◽  
Hideaki Yata ◽  
Keitaro Kubo

1982 ◽  
Vol 26 ◽  
pp. 415-421 ◽  
Author(s):  
L. Wielopolski ◽  
D. Vartsky ◽  
S. Yasumura ◽  
S.H. Cohn

Strontium appears in the earth's crust at a concentration of about 400 ppm and in sea water about 8,1 ppm. Consequently, all living forms have evolved in the presence of this alkaline earth and have incorporated it in their tissues. The exact role of Sr in the human body remains ambiguous (1), even though Sr has been extensively studied with reference to the radiation hazard from 90Sr (2).Metabolic behavior of Sr, in some aspects, is similar to that of Ca (3), but substantial dissimilarities between these two are also well recognized (1,4). It has been suggested that Sr stimulates the formation of bone matrix. At higher concentrations, however, it interferes with calcification mechanism of the bone matrix (5).


Blood ◽  
2002 ◽  
Vol 99 (6) ◽  
pp. 2207-2213 ◽  
Author(s):  
Hajime Saito ◽  
Jean Lai ◽  
Rick Rogers ◽  
Claire M. Doerschuk

Abstract Neutrophils are continuously released from the bone marrow (BM), and this release is accelerated during inflammation. This study compared the mechanical properties of mature neutrophils within the BM and the circulating blood, as well as the role of microtubule rearrangement in the release of neutrophils from the BM in rats. Neutrophils isolated from the BM were stiffer than neutrophils in the circulating blood, using magnetic twisting cytometry. BM neutrophils also contained more F-actin within the submembrane region than circulating neutrophils when examined using confocal microscopy, suggesting that mature quiescent neutrophils within the BM are stiffer than circulating neutrophils because of increased formation of F-actin beneath the plasma membrane. Complement protein 5 fragments or formylmethionyl-leucylphenylalanine (fMLP) induced a stiffening response within 2 minutes that was greater in circulating than in BM neutrophils. This stiffening required F-actin formation within the submembrane region but not microtubule rearrangement in both circulating and BM neutrophils. fMLP-induced shape changes were more pronounced in circulating than in BM neutrophils, which showed fewer and smaller pseudopods and fewer membrane irregularities. In vivo, fMLP induced neutropenia, sequestration of neutrophils within the pulmonary capillaries, and release of neutrophils from the BM. Studies using colchicine demonstrated that rearrangement of microtubules was not required for any of these processes but was required for normal trafficking of neutrophils through the pulmonary capillaries.


Author(s):  
Marion Geerligs ◽  
Lambert C. A. v. Breemen ◽  
Gerrit W. M. Peters ◽  
Paul A. J. Ackermans ◽  
Cees W. J. Oomens ◽  
...  

The outer skin layers are important drug and vaccine delivery targets in the treatment of diseases. These skin layers possess some important characteristics making them favorable sites for pain-free delivery with minimal damage: a rich population of immunologically sensitive cells as well as the lack of blood vessels and sensory nerve endings [1]. Until today, however, the development of effective cell targeting methods is acquainted with many challenges. A collective shortcoming is a poor understanding of the key mechanical properties of the outer skin layers, e.g. the stratum corneum and epidermis. The anisotropic, dynamic and very complex nature of skin makes it difficult to perform proper mechanical testing as well as to obtain reliable, reproducible data. The stratum corneum is an effective physical barrier of dead cells with a “brick-and-mortar” structure, while the viable epidermis mainly consists of actively migrating keratinocytes constantly undergoing massive morphological and compositional changes. As a consequence, the structure differences among the skin layers lead to significant variations in mechanical properties. Since there is no method available to determine the mechanical behavior of isolated viable epidermis in vivo or in vitro, the mechanical behavior of epidermis and stratum corneum only are investigated here. A commercially available indentation system has been adapted to enable the measurement of these thin soft tissues in an in vitro set up. Combining the outcomes of the two skin layer types leads to an assessment of the contribution of the viable epidermis to the mechanical behavior of skin. To our knowledge, no data have been published yet regarding mechanical bulk properties of (viable) epidermis, while no consistency exists with respect to those of the stratum corneum.


Sign in / Sign up

Export Citation Format

Share Document