Continuous hydrothermal crystallization of α–Fe2O3 and Co3O4 nanoparticles

2003 ◽  
Vol 18 (2) ◽  
pp. 415-422 ◽  
Author(s):  
Yalin Hao ◽  
Amyn S. Teja
Keyword(s):  
Particle Size ◽  
Sodium Hydroxide ◽  
Cobalt Oxide ◽  
Residence Time ◽  
Average Particle Size ◽  
Cobalt Nitrate ◽  
Metal Nitrate ◽  
Average Particle ◽  
Co3o4 Nanoparticles ◽  
Feed Concentration

Iron oxide (α–Fe2O3) and cobalt oxide (Co3O4) were produced via precipitation reactions carried out in a continuous hydrothermal apparatus. The resulting particles were nanometer-sized because of the high supersaturations generated when metal nitrate solutions are combined with sodium hydroxide or with hot, compressed water. The average particle size increased with the metal nitrate feed concentration and with residence time. A logarithmic relationship was obtained between the particle size and feed concentration and between particle size and residence time in the apparatus. The production of nanoparticles with narrow size distribution was shown to require low metal nitrate feed concentrations and short residence times. In the range of temperatures studied in this work, temperature apparently had no effect on the size except when cobalt nitrate was contacted with supercritical water in the absence of sodium hydroxide. In this case, large cobalt oxide particles were obtained when the temperature was above the critical temperature of water.

scholarly journals Enhanced Photocatlytic Activity of two Dimensional Graphitic C3N4@Co3O4 Core Shell Nanocomposite for Discriminatory Organic Transformation under Hg-Vapor Reactor

2021 ◽  
Vol 18 (2) ◽  
pp. 190-205
Author(s):  
Anita Parashram Patil ◽  
Satish Arvind Ahire ◽  
Shubham Nand kishor Hiray
Keyword(s):  
Electron Microscopy ◽  
Cobalt Oxide ◽  
Carbon Nitride ◽  
Structural Parameters ◽  
Average Particle Size ◽  
Average Particle ◽  
Co3o4 Nanoparticles ◽  
Oxide Material ◽  
Direct Heating ◽  
Prepared Material

In the present investigation the material Co3O4 nanoparticles were prepared by co-precipitation method, while graphitic carbon nitride (g-C3N4) was prepared by direct heating of melamine. The nanocompositeg-C3N4- Co3O4were prepared by stoichiometric mixing and direct heating in porcelain boat followed by calcination. The prepared nanomaterials were characterized by various techniques. These both materials were characterized by XRD to get structural parameters and to confirm the average particle size of prepared nanomaterial. The scanning electron microscopy(SEM) was carried out to get surface characteristics of prepared materials. The energy dispersive spectroscopy was conducted to get elemental composition prepared material Co3O4and g-C3N4- Co3O4 .The transmission electron microscopy (TEM) was conducted to get lattice information of prepared material. While magnetic properties of both the material were investigated by means of vibrating sample magnetometer (VSM), since cobalt oxide is a ferromagnetic material. The surface area was confirmed from Brunauer-Emmett-Teller (BET) study. The g-C3N4- Co3O4nanocomposite has found enhanced surface areaof 78.48 m2/g in comparison to the sole Co3O4nanomaterial (55.23 m2/g). Both these prepared materials were utilized in photocatlytic degradation of CarbolFuchsin (CF) dye. The various parameters related to optimization of photocatlytic degradation of dyes were investigated in detail. The carbon nitride mediated cobalt oxide material is found to be very effective for degradation of CF dye and almost 97% of dye was successfully decomposed by the g-C3N4- Co3O4nanocomposite. The reusability test confirms that the prepared g-C3N4- Co3O4nanocomposite is very efficient in degradation of CF dye in multiple cycles with 110 minutes of contact time.

scholarly journals Microbial and Plant Assisted Synthesis of Cobalt Oxide Nanoparticles and Their Antimicrobial Activities

Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1607
Author(s):  
Nadia Mubraiz ◽  
Asghari Bano ◽  
Tariq Mahmood ◽  
Naeem Khan
Keyword(s):  
Particle Size ◽  
Bacillus Subtilis ◽  
Fusarium Oxysporum ◽  
Cobalt Oxide ◽  
Bacterial Strain ◽  
Oxide Nanoparticles ◽  
Average Particle ◽  
Co3o4 Nanoparticles ◽  
Cobalt Oxide Nanoparticles ◽  
Wide Range

The development of sustainable, ecofriendly, and cost-effective methods for the synthesis of nanomaterials is an important aspect of nanotechnology these days. The present study was aimed at synthesizing cobalt oxide (Co3O4) nanoparticles by using plant extracts of Aerva javanica, bacterial isolates from rhizospheric soil of Potentilla atrosanguinea, Swertia petiolata, Senecio chrysanthemoides, and from fungus Fusarium oxysporum. X-ray diffraction spectroscopy (XRD) and scanning electron microscopy (SEM) techniques were used in the characterization of the synthesized nanoparticles. The bacterial strain, Bacillus subtilis, isolated from rhizosphere of Potentilla atrosanguinea (N1C1), Fusarium oxysporum, methanolic and aqueous extracts of Aerva javanica reduced the cobalt salts to cobalt oxide nanoparticles. The nanoparticles, synthesized from bacterial isolate N1C1 (Bacillus subtilis) and from Fusarium oxysporum had average particle size of 31.2 nm and 33.4 nm, respectively, whereas, the particle size of Aerva javanica was higher (39.2 nm) and all the nanoparticles were poly shaped. The nanoparticles synthesized from methanolic extract of Aerva javanica, bacterial strain (N1C1) and fungi Fusarium oxysporum showed better performance against Bacillus subtilis and P. aeruginosa, the bactericidal activity was higher against Gram-positive bacterial strains. Methanolic extracts of leaf and flower have shown a wide range of phytochemicals and higher antibacterial activity, and among all strains, Pseudomonas aeruginosa and Bacillus subtilis susceptibility was greater to extracts.

Synthesis and Characterization of Samarium Doped Ceria(Ce0.8Sm0.2O1.9) Nano-Particle by Aerosol Plasma Pyrolysis

2009 ◽  
Vol 421-422 ◽  
pp. 490-493
Author(s):  
Kenichi Myoujin ◽  
Yoshiki Ichikawa ◽  
Araki Toriyama ◽  
Takayuki Kodera ◽  
Takashi Ogihara
Keyword(s):  
Particle Size ◽  
Relative Density ◽  
Average Particle Size ◽  
Metal Nitrate ◽  
Average Particle ◽  
Starting Solution ◽  
Bet Analysis ◽  
Plasma Pyrolysis ◽  
Average Size ◽  
Precursor Powders

Spherical Ce0.8Sm0.2O1.9 precursor powders were synthesized by Aerosol Plasma pyrolysis using aqueous solution of metal nitrate. As-prepared powders obtained by this method have a spherical morphology with a nano size and submicron size. They had bimodal size distribution. The average size of primary particles was less than 100 nm. The concentrations of starting solution influenced to average particle size. The relative density of SDC pellet was highest when it was sintered at 1623 K. The relative density was 86 %. XRD, SEM, DTA-TG and BET analysis were used for determination of the composition, morphology, particle size and surface area.

Determination of grinding parameters of fenugreek seed

1970 ◽  
Vol 26 (1) ◽  
pp. 16 ◽  
Author(s):  
S Balasubramanian ◽  
Rajkumar Rajkumar ◽  
K K Singh
Keyword(s):  
Particle Size ◽  
Energy Consumption ◽  
Moisture Content ◽  
Specific Energy ◽  
Feed Rate ◽  
Average Particle Size ◽  
Specific Energy Consumption ◽  
Average Particle ◽  
Fenugreek Seeds ◽  
Fenugreek Seed

Experiment to identify ambient grinding conditions and energy consumed was conducted for fenugreek. Fenugreek seeds at three moisture content (5.1%, 11.5% and 17.3%, d.b.) were ground using a micro pulverizer hammer mill with different grinding screen openings (0.5, 1.0 and 1.5 mm) and feed rate (8, 16 and 24 kg h-1) at 3000 rpm. Physical properties of fenugreek seeds were also determined. Specific energy consumptions were found to decrease from 204.67 to 23.09 kJ kg-1 for increasing levels of feed rate and grinder screen openings. On the other hand specific energy consumption increased with increasing moisture content. The highest specific energy consumption was recorded for 17.3% moisture content and 8 kg h-1 feed rate with 0.5 mm screen opening. Average particle size decreased from 1.06 to 0.39 mm with increase of moisture content and grinder screen opening. It has been observed that the average particle size was minimum at 0.5 mm screen opening and 8 kg h-1 feed rate at lower moisture content. Bond’s work index and Kick’s constant were found to increase from 8.97 to 950.92 kWh kg-1 and 0.932 to 78.851 kWh kg-1 with the increase of moisture content, feed rate and grinder screen opening, respectively. Size reduction ratio and grinding effectiveness of fenugreek seed were found to decrease from 4.11 to 1.61 and 0.0118 to 0.0018 with the increase of moisture content, feed rate and grinder screen opening, respectively. The loose and compact bulk densities varied from 219.2 to 719.4 kg m-3 and 137.3 to 736.2 kg m-3, respectively.  

Formulating SLN and NLC as Innovative Drug Delivery Systems for Non-Invasive Routes of Drug Administration

2020 ◽  
Vol 27 (22) ◽  
pp. 3623-3656 ◽  
Author(s):  
Bruno Fonseca-Santos ◽  
Patrícia Bento Silva ◽  
Roberta Balansin Rigon ◽  
Mariana Rillo Sato ◽  
Marlus Chorilli
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
Average Particle Size ◽  
Delivery Systems ◽  
Average Particle ◽  
Minor Importance ◽  
Routes Of Administration ◽  
Non Invasive

Colloidal carriers diverge depending on their composition, ability to incorporate drugs and applicability, but the common feature is the small average particle size. Among the carriers with the potential nanostructured drug delivery application there are SLN and NLC. These nanostructured systems consist of complex lipids and highly purified mixtures of glycerides having varying particle size. Also, these systems have shown physical stability, protection capacity of unstable drugs, release control ability, excellent tolerability, possibility of vectorization, and no reported production problems related to large-scale. Several production procedures can be applied to achieve high association efficiency between the bioactive and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes Lipid-based nanocarriers (LNCs) versatile delivery system for various routes of administration. The route of administration has a significant impact on the therapeutic outcome of a drug. Thus, the non-invasive routes, which were of minor importance as parts of drug delivery in the past, have assumed added importance drugs, proteins, peptides and biopharmaceuticals drug delivery and these include nasal, buccal, vaginal and transdermal routes. The objective of this paper is to present the state of the art concerning the application of the lipid nanocarriers designated for non-invasive routes of administration. In this manner, this review presents an innovative technological platform to develop nanostructured delivery systems with great versatility of application in non-invasive routes of administration and targeting drug release.

Azithromycin nanosuspension preparation using evaporative precipitation into aqueous solution (EPAS) method and its comparative dissolution study

2020 ◽  
Vol 17 ◽  
Author(s):  
Mohammad Hossain Shariare ◽  
Tonmoy Kumar Mondal ◽  
Hani Alothaid ◽  
Md. Didaruzzaman Sohel ◽  
MD Wadud ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Dissolution Rate ◽  
Average Particle Size ◽  
Scale Up ◽  
Average Particle ◽  
Total Drug ◽  
Residual Solvent ◽  
Dissolution Study ◽  
Drug Content

Aim: EPAS (evaporative precipitation into aqueous solution) was used in the current studies to prepare azithromycin nanosuspensions and investigate the physicochemical characteristics for the nanosuspension batches with the aim of enhancing the dissolution rate of the nanopreparation to improve bioavailability. Methods: EPAS method used in this study for preparing azithromycin nanosuspension was achieved through developing an in-house instrumentation method. Particle size distribution was measured using Zetasizer Nano S without sample dilution. Dissolved azithromycin nanosuspensions were also compared with raw azithromycin powder and commercially available products. Total drug content of nanosuspension batches were measured using an Ultra-Performance Liquid Chromatography (UPLC) system with Photodiode Array (PDA) detector while residual solvent was measured using gas chromatography (GC). Results: The average particle size of azithromycin nanosuspension was 447.2 nm and total drug content was measured to be 97.81% upon recovery. Dissolution study data showed significant increase in dissolution rate for nanosuspension batch when compared to raw azithromycin and commercial version (microsuspension). The residual solvent found for azithromycin nanosuspension is 0.000098023 mg/ mL or 98.023 ppb. Conclusion: EPAS was successfully used to prepare azithromycin nanoparticles that exhibited significantly enhanced dissolution rate. Further studies are required to scale up the process and determine long term stability of the nanoparticles.

scholarly journals Evaluation of the Effects of Filler Fineness on the Properties of an Epoxy Asphalt Mixture

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2003
Author(s):  
Wei Xu ◽  
Jintao Wei ◽  
Zhengxiong Chen ◽  
Feng Wang ◽  
Jian Zhao
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Asphalt Mixture ◽  
Average Particle ◽  
Fine Dust ◽  
Bonding Structure ◽  
Epoxy Asphalt ◽  
Mineral Powder ◽  
Marshall Stability ◽  
Mixture Sample

The type and fineness of a filler significantly affect the performance of an asphalt mixture. There is a lack of specific research on the effects of filler fineness and dust from aggregates on the properties of epoxy asphalt (EA) mixtures. The effects of aggregate dust and mineral powder on the properties of an EA mixture were evaluated. These filler were tested to determine their fineness, specific surface area and mineral composition. The effects of these fillers on the EA mastic sample and mixture were evaluated. The morphology of the EA mastic samples was analyzed using scanning electron microscopy (SEM). The effects of the fillers on the Marshall stability, tensile strength and fatigue performance of the EA mixture were evaluated. The dust from the aggregates exhibited an even particle size distribution, and its average particle size was approximately 20% of that of the mineral powder. The SEM microanalysis showed that the EA mastic sample containing relatively fine dust formed a tight and dense interfacial bonding structure with the aggregate. The EA mixture sample containing filler composed of dust from aggregate had a significantly higher strength and longer fatigue life than that of the EA sample containing filler composed of mineral powder.

scholarly journals Surface Activity of Humic Acid and Its Sub-Fractions from Forest Soil

2021 ◽  
Vol 13 (15) ◽  
pp. 8122
Author(s):  
Shijie Tian ◽  
Weiqiang Tan ◽  
Xinyuan Wang ◽  
Tingting Li ◽  
Fanhao Song ◽  
...  
Keyword(s):  
Surface Tension ◽  
Particle Size ◽  
Humic Acid ◽  
Forest Soil ◽  
Surface Activity ◽  
Self Assembly ◽  
Average Particle Size ◽  
Gaussian Model ◽  
Exponential Model ◽  
Average Particle

Surface activity of humic acid (HA) and its six sub-fractions isolated from forest soil were characterized by surface tension measurements, dynamic light scattering, and laser doppler electrophoresis. The surface tension of HA and its sub-fractions reduced from 72.4 mN·m−1 to 36.8 mN·m−1 in exponential model with the increasing concentration from 0 to 2000 mg·L−1. The critical micelle concentration (CMC) and Z-average particle size ranged from 216–1024 mg·L−1 and 108.2–186.9 nm for HA and its sub-fractions, respectively. The CMC have related with alkyl C, O-alkyl C, aromatic C, and carbonyl C (p < 0.05), respectively, and could be predicted with the multiple linear regression equation of CMC, CMC = 18896 − 6.9 × C-296 × alkyl C-331 × aromatic C-17019 × H/C + 4054 × HB/HI (p < 0.05). The maximum particle size was 5000 nm after filtered by a membrane with pore size of 450 nm, indicating HA and its sub-fractions could progressed self-assembly at pH 6.86. The aggregate sizes of number-base particle size distributions were mainly in six clusters including 2 ± 1 nm, 5 ± 2 nm, 10 ± 3 nm, 21 ± 8 nm, 40 ± 10 nm, and >50 nm analyzed by Gaussian model that maybe due to the inconsistency of the components and structures of the HA sub-fractions, requiring further study. It is significance to explore the surface activity of HA and its sub-fractions, which is helpful to clarify the environmental behavior of HA.

Microstructure Characterization of Ag Nanoparticles Prepared by Hydrothermal Method

2012 ◽  
Vol 476-478 ◽  
pp. 1138-1141
Author(s):  
Zhi Qiang Wei ◽  
Qiang Wei ◽  
Li Gang Liu ◽  
Hua Yang ◽  
Xiao Juan Wu
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Hydrothermal Method ◽  
Ag Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Face Centered

Ag nanoparticles were successfully synthesized by hydrothermal method under the polyol system combined with traces of sodium chloride, Silver nitrate(AgNO3) and polyvinylpyrrolidone (PVP) acted as the silver source and dispersant respectively. The samples by this process were characterized via X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED) to determine the chemical composition, particle size, crystal structure and morphology. The experiment results indicate that the crystal structure of the samples is face centered cubic (FCC) structure as same as the bulk materials, The specific surface area is 24 m2/g, the particle size distribution ranging from10 to 50 nm, with an average particle size about 26 nm obtained by TEM and confirmed by XRD and BET results.

Sign in / Sign up

Export Citation Format

Share Document