Controlled preparation and characterization of multilayer sol-gel zirconia dip-coatings

2001 ◽  
Vol 16 (8) ◽  
pp. 2391-2398 ◽  
Author(s):  
Ricardo Caruso ◽  
Antonio Di´az-Parralejo ◽  
Pedro Miranda ◽  
Fernando Guiberteau
Keyword(s):  
Sol Gel ◽  
Dip Coating ◽  
Multilayer Coatings ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
310 Stainless Steel ◽  
Indentation Tests ◽  
Controlled Preparation

We describe a method for controlled preparation of sol-gel ceramic multilayer coatings obtained by dip-coating. The proposed fabrication routine guarantees obtaining crack-free multilayer coatings with control of the thickness and porosity of individual layers. The procedure is applied to obtain a 10-layer ZrO2–3 mol% Y2O3 coating deposited on AISI 310 stainless steel. The microstructure of this coating was investigated by using x-ray powder diffractometry and atomic force microscopy, and special consideration was given to the mechanical characterization of this thin film using ultramicrohardness indentation tests. Our results suggest that these zirconia coatings have good properties for use as protection barriers. Implications concerning general tailoring design of sol-gel dip-coatings are also considered.

scholarly journals Sol-gel synthesis and study of neodymium substitution effects in Co-Al-Nd-O system with possible applications as novel inorganic pigments

2012 ◽  
Vol 10 (5) ◽  
pp. 1574-1583 ◽  
Author(s):  
Dalia Jonynaite ◽  
Darius Jasaitis ◽  
Rimantas Raudonis ◽  
Algirdas Selskis ◽  
Remigijus Juskenas ◽  
...  
Keyword(s):  
Sol Gel ◽  
Substitution Effects ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Sol Gel Process ◽  
New Compounds ◽  
Sol Gel Synthesis

AbstractIn the present work, the formation of cobalt aluminium spinel (CoAl2O4) as well as novel cobalt neodymium-aluminates with nominal compositions of CoAl1.75Nd0.25O4, CoAl1.5Nd0.5O4 and CoAlNdO4 by an aqueous sol-gel process and the sinterability of the products are investigated. The metal ions, generated by dissolving starting materials of metals in the diluted acetic acid were complexed by 1,2-ethanediol to obtain the precursors for the mixed metal ceramics. The phase purity of the synthesized compounds was characterized by powder X-ray diffraction analysis and infrared spectroscopy. The microstructural evolution and morphological features of the products were studied by scanning electron microscopy and atomic force microscopy, which together with the optical characterization of these new compounds showed that the sol-gel-derived materials could be successfully used as effective cobalt-based ceramic pigments.

Preparation and Characterization of SiO2-Coated TiO2 Thin Films via Sol-Gel Dip Coating Technique

2015 ◽  
Vol 1109 ◽  
pp. 148-152
Author(s):  
A.K.M. Muaz ◽  
U. Hashim ◽  
Sharipah Nadzirah ◽  
M. Wesam Al-Mufti ◽  
Fatimah Ibrahim ◽  
...  
Keyword(s):  
Thin Films ◽  
Sol Gel ◽  
Dip Coating ◽  
Spherical Particles ◽  
Thickness Variation ◽  
Morphological Effect ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dip Coating Technique

In the present research, nanocrystalline TiO2thin films have been prepared via a sol-gel method using Ti {OCH(CH3)2}4act as a precursor. The morphological effect of sets of as-deposited and annealed samples (100, 300, 500 and 700°C for 1 hour) and thickness variation on the structural properties were investigated by Atomic Force Microscopy (AFM) measurements. The observation showed that the size of grain increases with film thickness, indicating that the size of the particles in the films can be effectively controlled by changing the temperature of thermal treatment. AFM topology images of the as-deposited and annealed TiO2films at 100 and 300°C indicates the films are rather smooth, compact, bulky, not uniform and column-like structure. TiO2thin films annealed at 500 and 700°C showed homogenous morphology surface with regular size of spherical particles.

Characterization of ordered mesoporous films on silicon (001) surface using X-ray and electron diffraction

2005 ◽  
Vol 38 (1) ◽  
pp. 211-216 ◽  
Author(s):  
Pang-Hung Liu ◽  
Kuei-Jung Chao ◽  
Xing-Jian Guo ◽  
Kuo-Ying Huang ◽  
Yen-Ru Lee ◽  
...  
Keyword(s):  
Electron Diffraction ◽  
Sol Gel ◽  
Dip Coating ◽  
Silica Film ◽  
Continuous Film ◽  
X Ray ◽  
Transmission Electron ◽  
Ordered Mesoporous ◽  
Direction Dependence

A continuous silica film with well aligned mesochannels parallel to the Si(001) surface was found to be formed through sol–gel dip-coating of a silica precursor with nonionic ethylene oxide surfactant. Two two-dimensional mesoporous structures in centered and non-centered rectangular symmetries and with the short axes of elongated ellipsoidal pores normal to the surface were observed by X-ray and electron diffraction. Detailed transmission electron microscopy investigations were employed to view the direction dependence of the channel or pore packing in the continuous film.

Infrared Characterization of PMMA-SiO2 Hybrid Glasses Obtained by Sol-Gel Process

2010 ◽  
Vol 1278 ◽  
Author(s):  
L.L. Díaz-Flores ◽  
A. S. López Rodríguez ◽  
P. SifuentesGallardo ◽  
M.A. Hernàndez Rivera ◽  
M.a Garnica Romo ◽  
...  
Keyword(s):  
Sol Gel ◽  
Chemical Properties ◽  
Hybrid Coatings ◽  
Force Microscopy ◽  
Air Atmosphere ◽  
Atomic Force ◽  
Sol Gel Process ◽  
Traditional Process ◽  
And Chemical Properties

AbstractThis work is about the production of hybrid coatings of the system SiO2-PMMA (PMMA, polymethylmethacrylate). These materials have interesting mechanical and chemical properties useful for anticorrosive and wear resistance applications. SiO2-PMMA hybrids were obtained by the sol-gel traditional process, using tetraethylorthosilicate (TEOS) and methylmethacrylate (MMA) by Aldrich Co, as starting reagents. The SiO2:PMMA ratio was varied from 0:1 to about 1:1 at air atmosphere deposition. The coatings were obtained on acrylic sheets and silicon wafers. A diversity of coatings with chemical composition ranging from SiO2 and PMMA to obtain the SiO2-PMMA hybrids were obtained. Infrared (IR) and atomic force microscopy (AFM), were performed to determinate structural and morphological behavior.

scholarly journals Synthesis of Metarhizium anisopliae–Chitosan Nanoparticles and Their Pathogenicity against Plutella xylostella (Linnaeus)

2021 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Jianhui Wu ◽  
Cailian Du ◽  
Jieming Zhang ◽  
Bo Yang ◽  
Andrew G. S. Cuthbertson ◽  
...  
Keyword(s):  
Plutella Xylostella ◽  
Metarhizium Anisopliae ◽  
Chitosan Nanoparticles ◽  
Analytical Techniques ◽  
X Ray ◽  
Synthesis Of Nanoparticles ◽  
Force Microscopy ◽  
Atomic Force ◽  
Afm Analysis

Nanotechnology is increasingly being used in areas of pesticide production and pest management. This study reports the isolation and virulence of a new Metarhizium anisopliae isolate SM036, along with the synthesis and characterization of M. anisopliae–chitosan nanoparticles followed by studies on the efficacy of nanoparticles against Plutella xylostella. The newly identified strain proved pathogenic to P. xylostella under laboratory conditions. The characterization of M. anisopliae–chitosan nanoparticles through different analytical techniques showed the successful synthesis of nanoparticles. SEM and HRTEM images confirmed the synthesis of spherical-shaped nanoparticles; X-ray diffractogram showed strong peaks between 2θ values of 16–30°; and atomic force microscopy (AFM) analysis revealed a particle size of 75.83 nm for M. anisopliae–chitosan nanoparticles, respectively. The bioassay studies demonstrated that different concentrations of M. anisopliae–chitosan nanoparticles were highly effective against second instar P. xylostella under laboratory and semi-field conditions. These findings suggest that M. anisopliae–chitosan nanoparticles can potentially be used in biorational P. xylostella management programs.

scholarly journals Preparation of TiO2 nanorods by Sol–Gel template method and measured its photo- catalytic activity for degradation of methyl orange

2019 ◽  
Vol 13 (26) ◽  
pp. 171-177
Author(s):  
Ban M. Al-Shabander
Keyword(s):  
Methyl Orange ◽  
Sol Gel ◽  
Tio2 Nanorods ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Photo Catalytic Activity ◽  
Atomic Force ◽  
Degradation Of Methyl Orange ◽  
Titanium Dioxide Nanorods

Titanium dioxide nanorods have been prepared by sol-gel templatemethod. The structural and surface morphology of the TiO2 nanorods wasinvestigated by X-ray diffraction (XRD) and atomic force microscopy(AFM), it was found that the nanorods produced were anatase TiO2 phase.The photocatalytic activity of the TiO2 nanorods was evaluated by thephoto degradation of methyl orange (MO). The relatively higherdegradation efficiency for MO (D%=78.2) was obtained after 6h of exposedto UV irradiation.

Growth and Characterization of bulk GaN by Ga Vapor Transport

2004 ◽  
Vol 831 ◽  
Author(s):  
Phanikumar Konkapaka ◽  
Huaqiang Wu ◽  
Yuri Makarov ◽  
Michael G. Spencer
Keyword(s):  
Growth Rates ◽  
Vapor Transport ◽  
Spiral Growth ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Bulk Gan ◽  
Diffraction Patterns

ABSTRACTBulk GaN crystals of dimensions 8.5 mm × 8.5 mm were grown at growth rates greater than 200μm/hr using Gallium Vapor Transport technique. GaN powder and Ammonia were used as the precursors for growing bulk GaN. Nitrogen is used as the carrier gas to transport the Ga vapor that was obtained from the decomposition of GaN powder. During the process, the source GaN powder was kept at 1155°C and the seed at 1180°C. Using this process, it was possible to achieve growth rates of above 200 microns/hr. The GaN layers thus obtained were characterized using X-Ray diffraction [XRD], scanning electron microscopy [SEM], and atomic force microscopy [AFM]. X-ray diffraction patterns showed that the grown GaN layers are single crystals oriented along c direction. AFM studies indicated that the dominant growth mode was dislocation mediated spiral growth. Electrical and Optical characterization were also performed on these samples. Hall mobility measurements indicated a mobility of 550 cm2/V.s and a carrier concentration of 6.67 × 1018/cm3

Improved Functional Capabilities of Quasi-Two-Dimensional Tungsten Oxide Nanostructures

2016 ◽  
Vol 689 ◽  
pp. 55-59
Author(s):  
Serge Zhuiykov
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Current Sensing ◽  
X Ray ◽  
Force Microscopy ◽  
Functional Capabilities ◽  
Atomic Force ◽  
Oxide Nanostructures ◽  
Afm Analysis

Electrical properties and morphology of orthorhombic β–WO3 nano-flakes with thickness of ~7-9 nm were investigated at the nanoscale using energy dispersive X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and current sensing force spectroscopy atomic force microscopy (CSFS-AFM, or PeakForce TUNATM). CSFS-AFM analysis established good correlation between the topography of the developed nanostructures and various features of WO3 nano-flakes synthesized via a two-step sol-gel-exfoliation method. It was determined that β–WO3 nano-flakes annealed at 550°C possess distinguished and exceptional thickness-dependent properties in comparison with the bulk, micro- and nano-structured WO3 synthesized at alternative temperatures.

Structural and Optical Characterization of Synthesized TiO2 Nanopowder Using Sol–Gel Technique

2016 ◽  
Vol 15 (01n02) ◽  
pp. 1650002 ◽  
Author(s):  
S. Lourduraj ◽  
R. Victor Williams
Keyword(s):  
Anatase Phase ◽  
Sol Gel ◽  
Visible Spectrum ◽  
Average Crystallite Size ◽  
Xrd Analysis ◽  
Force Microscopy ◽  
Morphological Studies ◽  
Atomic Force ◽  
Gel Technique

The nanocrystalline TiO2 powder was synthesized by sol–gel method. The XRD analysis reveals that TiO2 powder was highly crystalline (anatase phase) and nanostructured with tetragonal system. The average crystallite size after calcined at 673[Formula: see text]K is found to be 7.7[Formula: see text]nm. The surface morphological studies using scanning electron microscopy (SEM) exhibit that the formation of nanosized TiO2 particles with less densification nature. Atomic force microscopy (AFM) topography exhibits the uniform distribution of spherical-shaped particles. The energy dispersive X-ray spectroscopy (EDX) confirms the presence of Titanium and Oxygen in synthesized TiO2 nanopowder. The value of optical bandgap of TiO2 nanopowder calculated from UV-Visible spectrum is 3.45[Formula: see text]eV. The presence of TiO2 particles is confirmed from the dominant fourier transform infrared (FTIR) peaks at 621[Formula: see text]cm[Formula: see text] and 412[Formula: see text]cm[Formula: see text].

Sign in / Sign up

Export Citation Format

Share Document