Kinetics and Thermodynamics of Adsorption of Fluorides by ZeoSonNaFe

MRS Advances ◽  
2019 ◽  
Vol 4 (59-60) ◽  
pp. 3215-3221
Author(s):  
Jessica López-Castillo ◽  
G. Macedo-Miranda ◽  
S. Martínez-Gallegos ◽  
E. Ordoñez ◽  
J. Illescas ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Significant Modification ◽  
Order Model ◽  
Fluoride Solution ◽  
Kinetics And Thermodynamics ◽  
Pseudo Second Order ◽  
Best Fit

Abstract:The present study investigated the adsorption of fluorides in natural zeolites clinoptilolite-type, sourced in Sonora, Mexico, and modified with Fe. Characterization of the material was carried out along with determination of kinetic parameters varying time and concentration of reagents to calculate maximum adsorption capacity. To determine thermodynamic parameters temperature was varied for accurate characterization of the adsorption process. It was found that the zeolite fixed Fe in its structure without model significant modification, likewise when put in contact with a fluoride solution (F-), it was capable of taking up these ions through adsorption due to the interaction between the sorbato and the pollutant. The kinetics best fit Pseudo-second-order model with Qmax=0.91 mgg-1, therefore it indicates that the process is reversible, spontaneous and endothermic what can favor the reuse of the material.

Sorption properties of Amberlite XAD 7 functionalized with sodium β-glycerophosphate

2016 ◽  
Vol 88 (12) ◽  
pp. 1143-1154
Author(s):  
Andreea Gabor ◽  
Corneliu Mircea Davidescu ◽  
Adina Negrea ◽  
Mihaela Ciopec ◽  
Cornelia Muntean ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Ph Value ◽  
Sorption Properties ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
X Ray ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Efficient Adsorbent

Abstract This paper presents the sorption properties of a new adsorbent material prepared by impregnating Amberlite XAD 7 polymer with sodium β-glycerophosphate. For impregnation, the pellicular vacuum solvent vaporization method was employed. The functionalization was evidenced by energy dispersive X-ray analysis. The usefulness of this material and its performances were studied for the adsorption of the rare earth element La(III) in batch experiments. The influence of various parameters affecting the adsorption of lanthanum like contact time, initial concentration, pH value, and temperature was studied. The kinetic of the adsorption process was best described by the pseudo-second-order model. Sips isotherm was found to be the best fit of the equilibrium data. The maximum adsorption capacity of the functionalized material was of 33.8 mg La(III)/g. The values of thermodynamic parameters (ΔGo, ΔHo, ΔSo) showed that the adsorption process was endothermic and spontaneous. The results proved that Amberlite XAD 7 functionalized with sodium β-glycerophosphate is an efficient adsorbent for the removal of La(III) ions from aqueous solutions. Quantum chemistry was performed using Spartan software.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

scholarly journals Application of Biochar to the Remediation of Pb-Contaminated Solutions

2018 ◽  
Vol 10 (12) ◽  
pp. 4440 ◽  
Author(s):  
Maria Boni ◽  
Agostina Chiavola ◽  
Simone Marzeddu
Keyword(s):  
Adsorption Process ◽  
Chemical Characterization ◽  
Complete Removal ◽  
Order Model ◽  
Equilibrium Conditions ◽  
Sem Images ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Physical And Chemical

BIOTON® biochar, produced by a wood biomass pyrolysis process, which is usually applied as soil amendment, was investigated for a novel application, i.e., the adsorption of lead from contaminated solutions. The experimental activity included physical and chemical characterization of BIOTON®; and Scanning Electron Microscope (SEM) images to highlight its internal structure. The adsorption process was investigated through batch and column experiments. Adsorption kinetics showed very rapid achievement of equilibrium conditions, i.e., 50 mg/L and 100 mg/L initial Pb concentration at 2 h and 4 h, respectively. Complete removal also occurred within the same time. The Brunauer–Emmett–Teller model was a better fit for the equilibrium data of both Pb concentrations, whereas the kinetics were best represented by the pseudo second-order model. Column tests showed that the addition of biochar as an adsorbent media within the bed significantly extended the time of breakthrough and exhaustion, with respect to the column filled with soil only. The values found for the adsorption capacity of BIOTON®- versus lead-containing solutions were comparable to those reported for commercial adsorbents. Therefore, BIOTON® can be considered a valid option: It also offers the additional benefit of allowing the recovery of a residue, which alternately would need to be disposed of.

scholarly journals Removal of Crystal Violet Dye from Aqueous Solutions onto Date Palm Fiber by Adsorption Technique

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mashael Alshabanat ◽  
Ghadah Alsenani ◽  
Rasmiah Almufarij
Keyword(s):  
Crystal Violet ◽  
Date Palm ◽  
Dye Removal ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Date Palm Fibers ◽  
Crystal Violet Dye ◽  
Pseudo Second Order ◽  
Influence Of Ph

The adsorption of crystal violet (CV) onto date palm fibers (DPFs) was examined in aqueous solution at 25°C. The experimental maximum adsorption capacity value was0.66×10−6. Langmuir, Freundlich, Elovich and Temkin models were applied to describe the equilibrium isotherms. The influence of pH and temperature on dye removal was evaluated. The percentage removal of CV dye by adsorption onto DPF at different pH and temperatures showed that these factors play a role in the adsorption process. Thermodynamic analysis was performed, and the Gibbs free energyΔGο, enthalpy changeΔHο, and entropyΔSοwere calculated. The negative values ofΔGοindicate spontaneous adsorption. The negative value ofΔHοindicates that the interaction between CV and DPF is exothermic, and the positive value ofΔSοindicates good affinity between DPF and CV. The kinetic data were fitted to a pseudo-second-order model.

scholarly journals Corn stalk as starting material to prepare a novel adsorbent via SET-LRP and its adsorption performance for Pb(II) and Cu(II)

2020 ◽  
Vol 7 (3) ◽  
pp. 191811
Author(s):  
Yazhen Wang ◽  
Shuang Li ◽  
Liqun Ma ◽  
Shaobo Dong ◽  
Li Liu
Keyword(s):  
Adsorption Capacity ◽  
Potassium Hydroxide ◽  
Adsorption Process ◽  
Hydroxylamine Hydrochloride ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Corn Stalk ◽  
Order Model ◽  
Adsorption Performance ◽  
Pseudo Second Order

Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH 2 OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g –1 and 94.72 mg g −1 , and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.

Preparation of quaternary ammonium–Chlorella vulgaris and its adsorption of Ag(CN)2−

2015 ◽  
Vol 72 (8) ◽  
pp. 1437-1445
Author(s):  
Ting Li ◽  
Chencen Guo ◽  
Tonghui Xie ◽  
Chengxianyi Zhou ◽  
Yongkui Zhang
Keyword(s):  
Chlorella Vulgaris ◽  
Quaternary Ammonium ◽  
Adsorption Process ◽  
Base Material ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Measured Water

A novel anion exchange resin, quaternary ammonium–Chlorella vulgaris (QACV), was prepared by introducing quaternary ammonium groups onto dried Chlorella vulgaris as base material. Degrees of epoxy, amine and quaternary ammonium groups of QACV were measured. Water retention, optical microscopy, and Fourier transform infrared spectrometry were used to characterize QAVC. The adsorption behavior of QACV towards Ag(CN)2− in different conditions was studied carefully. The results showed that QAVC was efficient to adsorb Ag(CN)2− at pH 9–11, and adsorption equilibrium was almost reached in 30 min. Both kinetics and isotherm parameters in the adsorption process were obtained. The data indicated that the pseudo-second-order model provided a good correlation for adsorption of Ag(CN)2− on QACV and the calculated rate constant of the adsorption was 3.51 g/(mmol min). The equilibrium data fitted well in the Langmuir isotherm and the estimated maximum adsorption capacity qm was 1.96 mmol/g. The dimensionless separation factor RL was between 0 and 1, suggesting that the adsorption process of Ag(CN)2− using QACV was favorable. The QACV could be used successively three times without significantly affecting its adsorption efficiency. Chlorella vulgaris was a potential base material to be modified with quaternary ammonium groups to prepare an adsorbent for adsorption of Ag(CN)2−.

Preparation and Characterization of Fe3O4@nSiO2@mSiO2–NH2 Core–Shell Microspheres for Extracting Allura Red from Aqueous Solution

NANO ◽  
2015 ◽  
Vol 10 (08) ◽  
pp. 1550122 ◽  
Author(s):  
Desheng Xi ◽  
Xiaojuan Deng ◽  
Huijun Li ◽  
Pei Yao
Keyword(s):  
Food Industry ◽  
Adsorption Process ◽  
Water Soluble ◽  
Core Shell ◽  
High Saturation Magnetization ◽  
Order Model ◽  
External Magnet ◽  
Allura Red ◽  
Pseudo Second Order

Allura red (AR) is a water-soluble synthetic colorant often used as an additive in the food industry, but excess AR can be harmful to human health. In this work, we report the development of a new removal method for AR by using amino-functionalized microspheres with Fe3O4 cores and twolayer shells composed of SiO2 particles and perpendicularly aligned mesoporous SiO2 (designated Fe3O4@nSiO2@mSiO2–NH2). The material exhibits good dispersibility in aqueous solutions and a high saturation magnetization of 45.68[Formula: see text]emu[Formula: see text]g[Formula: see text], and can be magnetically separated efficiently with an external magnet. Importantly, the material has great adsorption capacity of 29.6[Formula: see text]mg[Formula: see text]g[Formula: see text] for AR and the capacity for reuse with a simple treatment. The adsorption process is very fast and the kinetics data are consistent with a pseudo-second order model. Based on these, a rapid and efficient method for extraction and analysis of AR in water and soft drinks has been established.

Adsorption of the Blue Dye Reactive Remazol RN in Cellulosic Materials

2014 ◽  
Vol 775-776 ◽  
pp. 749-754
Author(s):  
Mirna Sales Loiola Rosa ◽  
Marcos Pereira Silva ◽  
Alan Icaro Morais ◽  
Maria Rita de Morais Chaves Santos ◽  
Edson Cavalcanti Silva Filho ◽  
...  
Keyword(s):  
Low Cost ◽  
Langmuir Model ◽  
Blue Dye ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Textile Waste ◽  
Pseudo Second Order ◽  
Filter Papers ◽  
Best Fit ◽  
The Ideal

The disposal of textile waste in water bodies is exacerbating environmental problems, which led scientists to seek natural materials to develop more sustainable ways. Searching for low cost materials was used to remove the dye in two cellulosic sources (filter papers of different brands). The papers were characterized by XRD which confirmed crystallographic profile similar to cellulose. With the aim of optimizing the best conditions, various tests were performed, where the ideal time was 180 minutes for the paper 1 and 240 minutes for the second paper, both by adjusting the pseudo second-order model. The other parameters studied was the pH, adsorbate-adsorbent systems which have maximum adsorption capacity of 2.76 mg / g at pH 2.02 and 2 mg / g at pH 11 for the paper 1 and 10.57 mg / g pH 4 and 2 mg / g at pH 11 for the paper 2. Both adsorbents had the best fit to the Langmuir model in pHs 2 and 11 at the temperature of 298 K.

scholarly journals Kinetics, Isotherms and Thermodynamic Studies on Removal of Divalent Copper using Mallet Flower Leaf Powder as Bio-Adsorbent

2021 ◽  
Vol 18 (24) ◽  
pp. 1431
Author(s):  
Devarapalli Venkata Padma ◽  
Susarla Venkata Ananta Rama Sastry
Keyword(s):  
Experimental Data ◽  
Atomic Absorption ◽  
Kinetic Data ◽  
Maximum Adsorption Capacity ◽  
Divalent Copper ◽  
Order Model ◽  
Leaf Powder ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Agitation Time

The effectiveness and efficacy of Mallet Flower Leaf Powder (MFLP) as a bio-sorbent for the removal of heavy metal copper ions from the aqueous solutions have been studied. Experiments were conducted varying the pH, agitation time, temperature, biosorbent size and dosage as parameters. Speed of the mixing is kept at 200 rpm. The analysis of copper was done by using Atomic Absorption Spectrophotometer (AAS). The adsorption of copper was found to be dependent on pH and a maximum removal of 98.78 % was obtained at an optimum pH of 6.0. The optimum biosorbent dosage was 1 g for an agitation time of 40 min. The biosorption data obtained were validated for the best isotherm. The data collected were verified with the available adsorption isotherms. Experimental data obtained was well represented by Langmuir (RL = 0.161, qm = 5.96 mg/g, R2 = 0.9142), Freundlich (n = 0.64, Kf  = 0.79L/g, R2 = 0.9995) and Tempkin (R2 = 0.9083, bT = 267.63) isotherms, indicating favorable biosorption. The experimental data obtained were tested for the best fit and the Freundlich Model has yielded the best correlation with the highest regression coefficient, R2 = 0.9844. Kinetic data has also been presented using thermodynamic analysis and the pseudo second order model was found to be the best fit with a correlation coefficient of 0.999. For the removal of copper from the solution, bioadsorbent showed a maximum adsorption capacity of 5.96 mg/g. HIGHLIGHTS Removal of divalent copper from the aqueous solution using Mallet Flower Leaf powder Atomic Absorption Spectroscopy, Scanning Electron Microscopy and Fourier transform infrared analysis were used to characterize the Mallet Flower Leaf Powder Kinetic data has been presented using thermodynamic analysis and the pseudo second order model was found to be the best fit with a correlation coefficient of 0.999 The maximum adsorption capacity of MFLP for copper was found to be 5.96 mg/gm GRAPHICAL ABSTRACT

Sign in / Sign up

Export Citation Format

Share Document