Intlp compounds for Underwater Solar Energy Harvesting

MRS Advances ◽  
2018 ◽  
Vol 3 (3) ◽  
pp. 153-158 ◽  
Author(s):  
Ahmed Zayan ◽  
Thomas E. Vandervelde

ABSTRACTWith the rising interest in oceanic monitoring, climate awareness and surveillance, the scientific community need for developing autonomous, self-sustaining Unmanned Underwater Vehicles (UUVs) increased as well. Limitations on the size, maneuverability, power consumption, and available on-site maintenance of these UUVs make a number of proposed technologies to power them harder to implement than others; solar energy harvesting stands as one of the more promising candidates to address the need for a long-term energy supply for UUVs due to its relatively small size and ease of deployment. Studies show research groups focusing on the use of Si cells (amorphous and crystalline), InGaP, and more recently Organic Photovoltaics to convert the attenuated solar spectrum under shallow depths (no deeper than 9.1 m) into electrical energy used or stored by the UUV’s power management system (P. P. Jenkins et al. 2014; Walters et al. 2015). In our study, we consider the ternary compound In1-xTlxP that allows for varying the quantum efficiency of the cell, and by extension the overall harvesting efficiency of the system by altering the Tl content (x) in the compound. In1-xTlxP on InP is a low strain system since the compound exhibits very little change in its lattice constant with changing Tl content due to the comparable atomic size and forces of In and Tl allowing for relatively easy growth on InP substrates. The study focuses on studying the spectral response and comparing the performance of an optimized single junction In1-xTlxP cells to In1-yGayP cells while accounting for the optical losses of the solar irradiance underwater for various depths.

Author(s):  
Peiwen Li ◽  
Cho Lik Chan ◽  
C. F. Chen

A study on the characteristics of a buoyancy-driven flow in a rectangular circulation channel in a solar-energy-harvesting device is presented in this paper. The solar-energy-harvesting device is projected to convert solar radiation into electrical energy. As a first step of the energy conversion in the device, a flow is generated by an imbalance of buoyancy forces in the heating and cooling sections for a liquid in the circulation channel. Whereas solar energy is collected to provide the heat, free convection of ambient air provides the cooling in the device. The fluid used in the circulation channel is electrically conductive and has high thermal expansion coefficient. The present investigation focuses on the effects of channel dimensions on the buoyancy-driven flow field and uniformities of velocities. Both analytical and numerical approaches are applied in the study. Analytical closed-form solution is obtained by assuming uni-direction flow. Steady-state two-dimensional laminar solutions are obtained by numerical computation using QUICK scheme and SIMPLE algorithm.


2019 ◽  
Author(s):  
Rishal Asri ◽  
Koko Friansa

The current building is expected to provide physical comfort, such as room comfort, temperature, sound and lighting. Some equipment is needed that requires electrical energy to provide physical comfort. Like a room cooling device to provide thermal comfort, a room lamp to provide lighting comfort. The ITERA building built by the City Government of Bandar Lampung has high solar energy potential. While the electricity source still uses diesel fuel. The potential for solar energy radiation is used to become electrical energy by using glass windows as the foundation for installing solar energy harvesting systems using solar PV.


2016 ◽  
Vol 5 (2) ◽  
pp. 1 ◽  
Author(s):  
S. H. Zainud-Deen ◽  
N. A. Eltresy ◽  
H. A. Malhat ◽  
K. H. Awadalla

Single and dual linearly-polarized receiving mode nanoantennas are designed for solar energy harvesting at 28.3 THz. The infrared rectennas are used to harvest the solar energy and converting it to electrical energy.  The proposed infrared rectenna is a thin dipole made of gold and printed on a silicon dioxide substrate. Different shapes of the dipole arms have been investigated for maximum collected energy. The two poles of the dipole have been determined in a rectangular, circular and rhombus shapes. The rectenna dipole is used to concentrate the electromagnetic energy into a small localized area at the inner tips of the gap between the dipole arms. The dimensions of the different dipole shapes are optimized for maximum near electric field intensity at a frequency of 28.3 THz. A Metal Insulator Metal (MIM) diode is incorporated with the nanoantenna dipole to rectify the received energy. The receiving efficiency of the solar energy collector with integrated MIM diode has been investigated. A dual-polarized, four arms, rhombus shaped nanoantenna dipole for solar energy harvesting has been designed and optimized for 28.3 THz applications.


Sign in / Sign up

Export Citation Format

Share Document