Surface Analysis of the Tarnishing Layer in Silver Alloys

MRS Advances ◽  
2017 ◽  
Vol 2 (63) ◽  
pp. 3983-3989 ◽  
Author(s):  
Janette Ortíz-Corona ◽  
José L. Ruvalcaba-Sil ◽  
Edgar Casanova-González ◽  
Francisco J. Rodríguez-Gómez
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Copper Content ◽  
Black Film ◽  
Silver Alloys ◽  
X Ray ◽  
Ammonium Sulfide ◽  
Sulfide Solution ◽  
Scanning Electron

AbstractAncient silver artifacts, when exposed to environments that contain sulfides (H2S), become tarnished and a black film is formed on the surface. The current study deals with the role of copper content and oxygen in the formation of tarnishing in the silver alloys 0.925, 0.800 and 0.720. An ammonium sulfide solution was used as an accelerator of the tarnishing process for different immersion conditions. The analysis of the tarnishing layer in silver alloys was performed by Raman Spectroscopy, Scanning Electron Microscopy - Energy Dispersive X-ray spectroscopy (SEM-EDS) and X-Ray Fluorescence (XRF). The formation of the tarnishing layer was found to be influenced by copper and oxygen contents. The corrosion products under the conditions studied were found to be mainly acanthite and jalpaite.

Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad

2007 ◽  
Vol 22 (7) ◽  
pp. 1879-1887 ◽  
Author(s):  
Y.K. Jee ◽  
Y.H. Ko ◽  
Jin Yu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Isothermal Aging ◽  
X Ray Diffraction ◽  
X Ray ◽  
Drop Tests ◽  
Joint Microstructures ◽  
Role Of Zn ◽  
Scanning Electron

Varying amounts of Zn (1, 3, and 7 wt%) were added to Sn–3.5Ag solder on a Cu pad, and the resultant solder joint microstructures after a reflow and isothermal aging (150 °C, up to 500 h) were investigated using scanning electron microscopy, energy dispersive x-ray, and x-ray diffraction, which were subsequently correlated to the results of microhardness and drop tests. Zinc was effective in improving the drop resistance of Sn–3.5Ag solder on the Cu pad, and an addition of 3 wt% Zn nearly doubled the number of drops-to-failure (Nf). The beneficial role of Zn was ascribed to suppression of Cu6Sn5 and precipitation of Zn-containing intermetallic compounds (IMCs). However, the Zn effect was reduced as Cu6Sn5 and Ag3Sn precipitated in a joint IMC layer after prolonged aging. The interface between Ag5Zn8 and Cu5Zn8 was resistant to drop impact, but two other layered IMC structures of Cu6Sn5/Cu3Sn and Cu5Zn8/Cu6Sn5 were not.

Structural and morphological features of MgO powders. The key role of the preparative starting compound

1998 ◽  
Vol 13 (8) ◽  
pp. 2218-2223 ◽  
Author(s):  
S. Ardizzone ◽  
C. L. Bianchi ◽  
B. Vercelli
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Specific Surface ◽  
Surface Area ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Starting Compound ◽  
Scanning Electron

The present paper reports data concerning magnesia samples obtained by calcination of different precursor salts at different increasing temperatures (873–1253 K). The oxides are characterized by x- ray diffraction, scanning electron microscopy, and N2 adsorption at subcritical temperatures. The samples appear to be composed, at any temperature, of pure periclase with a degree of crystallinity which increases with the temperature of calcination. Morphologically, the products have the shape either of lamellas or of cubes of variable dimensions, depending on the nature and route of preparation of the precursor salts. The variation of the specific surface area and the degree of porosity with the nature of the precursors and the temperature is discussed.

Synthesis of Coal Dust Depressor and its Application in Preventing Coal Dust

2012 ◽  
Vol 482-484 ◽  
pp. 2301-2306 ◽  
Author(s):  
Fang Qin Cheng ◽  
Shu Yan Cheng ◽  
Yan Xia Guo ◽  
Li Qiong Cao
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Coal Dust ◽  
Raw Material ◽  
Surface Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Stock Pile ◽  
Scanning Electron

A novel coal dust depressor was prepared by alkalization and etherficayion reactions using wastepaper as raw material. The sample was characterized by means of FTIR spectroscopy (FTIR)、scanning electron microscopy (SEM)、X-ray diffraction (XRF) and viscometer measurements. The coal dust inhibitor was developed to suppress flying dust over coal dump and conveyor. The result shows that flying coal dust was prevented by intrinsic viscosity of coal dust depressor which was sprayed on the surface stock pile can make the surface material bond with each other to form layer of crust, having a role of dust prevention. Application of the coal dust depressor can reduce the losses of coal and protect the environment from being polluted.

scholarly journals The Role of Chemical Substitutions on Bi-2212 Superconductors

Crystals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 462 ◽  
Author(s):  
Riccardo Cabassi ◽  
Davide Delmonte ◽  
Muna Mousa Abbas ◽  
Ali Razzak Abdulridha ◽  
Edmondo Gilioli
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Critical Temperature ◽  
High Temperature Superconductor ◽  
X Ray Diffraction ◽  
Structural Morphology ◽  
X Ray ◽  
Critical Temperature Tc ◽  
Scanning Electron

We present a study on the correlation of the superconducting critical temperature (Tc) and structural morphology with a chemically substituted high-temperature superconductor (HTS) (Bi,Pb)-2212 via Powder X-ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and d c magnetometry. The elements Zn, Y, Ti, and Nd are incorporated within the bismuth cuprate structure at amounts that extend the ranges currently found in literature.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Scanning Electron Microscopy and X-Ray Analyses of Dental Tissues from a Hibernator

1976 ◽  
Vol 34 ◽  
pp. 178-179
Author(s):  
M. L. Zimny ◽  
A. C. Haller
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Body Temperature ◽  
Ground Squirrel ◽  
Alveolar Bone ◽  
X Ray ◽  
Dental Tissues ◽  
Bone Minerals ◽  
Apical Tooth ◽  
Scanning Electron

During hibernation the ground squirrel is immobile, body temperature reduced and metabolism depressed. Hibernation has been shown to affect dental tissues varying degrees, although not much work has been done in this area. In limited studies, it has been shown that hibernation results in (1) mobilization of bone minerals; (2) deficient dentinogenesis and degeneration of alveolar bone; (3) presence of calculus and tears in the cementum; and (4) aggrevation of caries and pulpal and apical tooth abscesses. The purpose of this investigation was to study the effects of hibernation on dental tissues employing scanning electron microscopy (SEM) and related x-ray analyses.

The use of scanning electron microscopy in interpreting chenopodium remains from three archaeological sites in northwestern Iowa

1992 ◽  
Vol 50 (2) ◽  
pp. 1112-1113
Author(s):  
Douglas William Jones
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Archaeological Sites ◽  
Late Prehistoric ◽  
Eastern United States ◽  
Chenopodium Berlandieri ◽  
Seed Identification ◽  
Level 2 ◽  
Scanning Electron

Within the past 20 years, archaeobotanical research in the Eastern United States has documented an early agricultural complex before the dominance of the Mesoamerican domesticates (corn, beans, and squash) in late prehistoric and historic agricultural systems. This early agricultural complex consisted of domesticated plants such as Iva annua var.macrocarpa (Sumpweed or Marshelder), Hellanthus annuus (Sunflower) and Chenopodium berlandieri, (Goosefoot or Lasbsquarters), and heavily utilized plants such as Polygonum erectum (Erect Knotweed), Phalaris caroliniana (May grass), and Hordeum pusillum (Little Barley).Recent research involving the use of Scanning Electron Microscopy (SEM) specifically on Chenopodium has established diagnostic traits of wild and domesticated species seeds. This is important because carbonized or uncarbonized seeds are the most commonly recovered Chenopodium material from archaeological sites. The diagnostic seed traits assist archaeobotanists in identification of Chenopodium remains and provide a basis for evaluation of Chenopodium utilization in a culture's subsistence patterns. With the aid of SEM, an analysis of Chenopodium remains from three Late Prehistoric sites in Northwest Iowa (Blood Run [Oneota culture], Brewster [Mill Creek culture], and Chan-Ya-Ta [Mill Creek culture]) has been conducted to: 1) attempt seed identification to a species level, 2) evaluate the traits of the seeds for classification as either wild or domesticated, and 3) evaluate the role of Chenopodium utilization in both the Oneota and Mill Creek cultures.

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

1995 ◽  
Vol 53 ◽  
pp. 692-693
Author(s):  
Yun Lu ◽  
David C. Joy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Morphological Development ◽  
Early Hydration ◽  
X Ray ◽  
Blended Cements ◽  
Powder Particles ◽  
Chemical Wastes ◽  
Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Defects of Platelet Function Recognized by X-Ray Imaging and Scanning Electron Microscopy

1985 ◽  
Vol 43 ◽  
pp. 610-613
Author(s):  
M.G. Baldini ◽  
S. Morinaga ◽  
D. Minasian ◽  
R. Feder ◽  
D. Sayre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Biology ◽  
Imaging Technique ◽  
Human Platelets ◽  
X Rays ◽  
X Ray ◽  
X Ray Imaging ◽  
Complex Phenomena ◽  
Scanning Electron

Contact X-ray imaging is presently developing as an important imaging technique in cell biology. Our recent studies on human platelets have demonstrated that the cytoskeleton of these cells contains photondense structures which can preferentially be imaged by soft X-ray imaging. Our present research has dealt with platelet activation, i.e., the complex phenomena which precede platelet appregation and are associated with profound changes in platelet cytoskeleton. Human platelets suspended in plasma were used. Whole cell mounts were fixed and dehydrated, then exposed to a stationary source of soft X-rays as previously described. Developed replicas and respective grids were studied by scanning electron microscopy (SEM).

Sign in / Sign up

Export Citation Format

Share Document