Mechanically Compliant Electrodes and Dielectric Elastomers from PEG-PDMS Copolymers

MRS Advances ◽  
2016 ◽  
Vol 1 (52) ◽  
pp. 3497-3508
Author(s):  
Aliff Hisyam A Razak ◽  
Frederikke Bahrt Madsen ◽  
Anne Ladegaard Skov
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Molecular Weight ◽  
Polymer Matrix ◽  
High Conductivity ◽  
Stress And Strain ◽  
Multi Walled Carbon Nanotubes ◽  
Highly Stretchable ◽  
Walled Carbon Nanotubes ◽  
Compliant Electrodes

ABSTRACTSoft conducting elastomers have been prepared from polydimethylsiloxane-polyethyleneglycol (PDMS-PEG) copolymer and surfactant-stabilized multi-walled carbon nanotubes (MWCNTs). The copolymer was chain-extended with PDMS of molecular weight 17.2 kg mol-1 in order to obtain a crosslinkable PDMS with molecular weight around 20 – 30 kg mol-1. MWCNTs were treated with surfactant and sonicated for better dispersion in the polymer matrix. The conductivity and mechanical properties of conducting elastomers were thoroughly investigated including stress and strain at break. The developed conducting elastomers showed high conductivity combined with inherent softness. The high conductivity and softness, PDMS-PEG copolymers with incorporated MWCNTs hold great promises as compliant and highly stretchable electrodes for stretchable devices such as electro-mechanical transducers.

Improving the mechanical properties of Fe3O4/carbon nanotube reinforced nanocomposites by a low-magnetic-field induced alignment

2018 ◽  
Vol 38 (8) ◽  
pp. 731-738
Author(s):  
Yifan Huang ◽  
Weicheng Jiao ◽  
Yue Niu ◽  
Guomin Ding ◽  
Rongguo Wang
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Field Strength ◽  
Polymer Matrix ◽  
Inert Gas ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Low Magnetic Field

Abstract The aim of the paper is to develop a novel nanocomposite with high mechanical properties. The mechanical properties are improved by aligning the Fe3O4/multi-walled carbon nanotubes (MWCNTs) into a highly oriented manner in epoxy resin (EP) via a low magnetic field. Fe3O4 nanoparticles were tethered onto the surface of MWCNTs by a novel water-in-oil (W/O) method without heating at high temperatures or the protection of inert gas. Then, the modified magnetic MWCNTs (m-MWCNTs) were added into EP and aligned in a low magnetic field (100 mT). A method was presented to estimate the minimum magnetic field strength for aligning the m-MWCNTs. Besides, the morphology and microstructures of the fabricated m-MWCNTs and m-MWCNTs/EP highly ordered nanocomposites were characterized. Finally, the mechanical properties measurements were performed. The results of the experiments showed that this method was very efficient in aligning m-MWCNTs embedded in polymer matrix leading to a highly ordered composite for improving mechanical properties.

scholarly journals Enhancement of out-of-plane mechanical properties of carbon fiber reinforced epoxy resin composite by incorporating the multi-walled carbon nanotubes

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Seyed Ali Mirsalehi ◽  
Amir Ali Youzbashi ◽  
Amjad Sazgar
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Test ◽  
Epoxy Resin ◽  
Laminate Composite ◽  
Filament Winding ◽  
Hybrid Nanocomposites ◽  
Out Of Plane ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

AbstractIn this study, epoxy hybrid nanocomposites reinforced by carbon fibers (CFs) were fabricated by a filament winding. To improve out-of-plane (transverse) mechanical properties, 0.5 and 1.0 Wt.% multi-walled carbon nanotubes (MWCNTs) were embedded into epoxy/CF composites. The MWCNTs were well dispersed into the epoxy resin without using any additives. The transverse mechanical properties of epoxy/MWCNT/CF hybrid nanocomposites were evaluated by the tensile test in the vertical direction to the CFs (90º tensile) and flexural tests. The fracture surfaces of composites were studied by scanning electron microscopy (SEM). The SEM observations showed that the bridging of the MWCNTs is one of the mechanisms of transverse mechanical properties enhancement in the epoxy/MWCNT/CF composites. The results of the 90º tensile test proved that the tensile strength and elongation at break of nanocomposite with 1.0 Wt.% MWCNTs improved up to 53% and 50% in comparison with epoxy/CF laminate composite, respectively. Furthermore, the flexural strength, secant modulus, and elongation of epoxy/1.0 Wt.% MWCNT/CF hybrid nanocomposite increased 15%, 7%, and 9% compared to epoxy/CF laminate composite, respectively.

Effect of nanofiller on fibre laser drilling quality of carbon fibre reinforced polymer composite laminates

2018 ◽  
Vol 233 (4) ◽  
pp. 857-870
Author(s):  
Dhiraj Kumar ◽  
Kalyan Kumar Singh
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Fibre ◽  
Polymer Matrix ◽  
Composite Laminates ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Multi Walled Carbon Nanotubes ◽  
Fibre Reinforced Polymer ◽  
Walled Carbon Nanotubes

Laser machining of carbon fibre reinforced polymer composites is a challenging task due to a significant difference between physical and thermal properties of the constituent materials, i.e. polymer matrix and carbon fibres. This results in extended heat-affected zone (HAZ), taper kerf and poor surface finishing. This paper focuses on an investigation, attempting to minimise the divergence in the decomposition temperature of carbon fibres and epoxy resin by adding multi-walled carbon nanotubes in polymer matrix as a secondary reinforcement. High thermal conductivity of multi-walled carbon nanotubes increases the thermal diffusivity of polymer matrix, which in turn reduces the matrix recession. In addition, laser power and scan speed was also considered as an input parameter and their influence on output responses such as HAZ, taper angle and surface roughness has been studied. To analyse the effect of multi-walled carbon nanotubes on the resultant thermal damage, an innovative technique, i.e. scanning acoustic microscopy was used. This technique provides a ply-by-ply damage analysis. C-scans of the top and bottom surface of the machined holes in the composite were also carried out. Further, micrographs of the holes were taken to analyse the quality of the holes using field-emission scanning electron microscope. The obtained results indicated that HAZ, taper angle and surface roughness of holes decreased by ∼30%, ∼47% and ∼43%, respectively, with 1.5 wt% multi-walled carbon nanotubes doped carbon fibre reinforced polymer laminates, when compared with the results obtained from experiments with neat carbon fibre reinforced polymer composite laminates.

scholarly journals Polymeric Composites Based on Polyurea Matrix Reinforced with Carbon Nanotubes

2017 ◽  
Vol 54 (1) ◽  
pp. 41-44 ◽  
Author(s):  
Maria Adina Vulcan ◽  
Celina Damian ◽  
Paul Octavian Stanescu ◽  
Eugeniu Vasile ◽  
Razvan Petre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This paper deals with the synthesis of polyurea and its use as polymer matrix for nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Two types of materials were obtained during this research, the first cathegory uses the polyurea as matrix and the second one uses a mixture between epoxy resin and polyurea. The nanocomposites were characterized by Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Scanning Electron Microscopy (SEM) and Tensile Tests .The elastomeric features of nanocomposites were highlighted by the results which showed low value of Tg. Also higher thermal stability with ~40oC compared with commercial products (M20) were observed, but lower mechanical properties compared to neat polyurea.

Sign in / Sign up

Export Citation Format

Share Document