scholarly journals Graphene Channels Interfaced with Quantum Dots in Field Effect Transistors: Electrical and Photo-Induced Effects

MRS Advances ◽  
2016 ◽  
Vol 1 (22) ◽  
pp. 1597-1603
Author(s):  
Xin Miao ◽  
Samarth Trivedi ◽  
Haim Grebel
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Chemical Vapor ◽  
Hole Array ◽  
Light Illumination ◽  
Anodized Aluminum ◽  
Transistor Channel ◽  
Anodized Aluminum Oxide ◽  
Hexagonal Hole ◽  
White Light Illumination

ABSTRACTGraphene-based field effect transistors (GFETs) were assessed when interfaced with well separated and precisely placed core/shell CdSe/ZnS semiconductor quantum dot (QD) arrays. The QDs were imbedded in a hexagonal hole-array, which was formed in a layer of anodized aluminum oxide on Si/SiO2substrates. Graphene (single, or two layers), grown by chemical vapor deposition (CVD) on Cu foils, was transferred and placed on top of the QDs imbedded films and served as the transistor channel. Electrical characteristics under white-light illumination at various biasing conditions revealed that the photo current was decreasing upon increasing biasing. The device's photoluminescence (PL) as a function of both the drain-source and gate-source potentials also reduced as a function of the potential biases. We observed two maxima in the PL data while tilting the sample with respect to the incident laser beam. We attributed it to the optimal coupling between the incident and the emission wavelengths to resonating surface modes.

Electrical and Photo-Induced Effects in Graphene Channels When Interfaced with Quantum Dots

2015 ◽  
Vol 1727 ◽  
Author(s):  
Xin Miao ◽  
Samarth Trivedi ◽  
Haim Grebel
Keyword(s):  
Quantum Dots ◽  
White Light ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Semiconductor Quantum Dots ◽  
Light Illumination ◽  
Electrical Characteristics ◽  
Channel Response ◽  
White Light Illumination

ABSTRACTField effect transistors with graphene channels were interfaced with arrays of semiconductor quantum dots (QD). The electrical characteristics of the elements were assessed. The channel response to white light illumination was also assessed as a function of drain-source and gate-source biases.

Structures of Anodized Aluminum Oxide Extended-Gate Field-Effect Transistors on pH Sensors

2006 ◽  
Vol 45 (10A) ◽  
pp. 7999-8004 ◽  
Author(s):  
Jyh-Ling Lin ◽  
Yung-Ming Chu ◽  
Shih-Hua Hsaio ◽  
Yuan-Lung Chin ◽  
Tai-Ping Sun
Keyword(s):  
Aluminum Oxide ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Ph Sensors ◽  
Anodized Aluminum ◽  
Anodized Aluminum Oxide

scholarly journals All-Organic, Low Voltage, Transparent and Compliant Organic Field-Effect Transistor Fabricated by Means of Large-Area, Cost-Effective Techniques

2020 ◽  
Vol 10 (19) ◽  
pp. 6656
Author(s):  
Stefano Lai ◽  
Giulia Casula ◽  
Pier Carlo Ricci ◽  
Piero Cosseddu ◽  
Annalisa Bonfiglio
Keyword(s):  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
High Mobility ◽  
Chemical Vapor ◽  
Cost Effective ◽  
Large Area ◽  
Parylene C ◽  
Biomedical Sensing ◽  
Novel Applications

The development of electronic devices with enhanced properties of transparency and conformability is of high interest for the development of novel applications in the field of bioelectronics and biomedical sensing. Here, a fabrication process for all organic Organic Field-Effect Transistors (OFETs) by means of large-area, cost-effective techniques such as inkjet printing and chemical vapor deposition is reported. The fabricated device can operate at low voltages (as high as 4 V) with ideal electronic characteristics, including low threshold voltage, relatively high mobility and low subthreshold voltages. The employment of organic materials such as Parylene C, PEDOT:PSS and 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS pentacene) helps to obtain highly transparent transistors, with a relative transmittance exceeding 80%. Interestingly enough, the proposed process can be reliably employed for OFET fabrication over different kind of substrates, ranging from transparent, flexible but relatively thick polyethylene terephthalate (PET) substrates to transparent, 700-nm-thick, compliant Parylene C films. OFETs fabricated on such sub-micrometrical substrates maintain their functionality after being transferred onto complex surfaces, such as human skin and wearable items. To this aim, the electrical and electromechanical stability of proposed devices will be discussed.

Batch-Fabricated WSe₂-on-Sapphire Field-Effect Transistors Grown by Chemical Vapor Deposition

2020 ◽  
Vol 67 (4) ◽  
pp. 1839-1844 ◽  
Author(s):  
M. Asghari Heidarlou ◽  
P. Paletti ◽  
B. Jariwala ◽  
J. A. Robinson ◽  
S. K. Fullerton-Shirey ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Chemical Vapor

Flexible organic field-effect transistors fabricated by the electrode-peeling transfer

2003 ◽  
Vol 769 ◽  
Author(s):  
Takeshi Yasuda ◽  
Katsuhiko Fujita ◽  
Tetsuo Tsutsui
Keyword(s):  
Dielectric Layer ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Flexible Substrate ◽  
Chemical Vapor ◽  
Solid Substrate ◽  
Semiconductor Material ◽  
Organic Field Effect Transistors ◽  
Gate Electrode ◽  
Micro Patterning

AbstractWe report a simple and mild fabrication of flexible organic field-effect transistors (OFETs) by an electrode-peeling transfer method. Firstly, fine patterns of source-drain metal electrodes were formed on a solid substrate, where a micro-patterning process such as photolithography is applicable. An organic dielectric layer (poly-chloro-p-xylylene) was deposited by a chemical vapor deposition. Then patterned gate electrode was deposited using a shadow mask. On the top surface of the gate electrode, another adhesive flexible substrate was fixed and the stack of the flexible substrate/gate electrode /dielectric layer /source-drain electrode was peeled away from the solid substrate. The peeling-transfer was completed with a help of a self-assembled monolayer of n-decyl mercaptan as a connecting buffer layer between the gold electrodes and the dielectric layer. Then an organic semiconductor material was deposited on the fresh peeled-off surface on the flexible substrate. When pentacene was used as the semiconductor material, the OFETs exhibited a hole mobility of 0.1 cm2/Vs and a current on/off ratio of 105.

scholarly journals Physical and Electrical Characteristics of Carbon Nanotube Network Field-Effect Transistors Synthesized by Alcohol Catalytic Chemical Vapor Deposition

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Chin-Lung Cheng ◽  
Chien-Wei Liu ◽  
Bau-Tong Dai ◽  
Ming-Yen Lee
Keyword(s):  
Chemical Vapor Deposition ◽  
Carbon Nanotube ◽  
Vapor Deposition ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Chemical Vapor ◽  
Drain Current ◽  
Electrical Characteristics ◽  
Carbon Nanotube Network ◽  
Carbon Nanotube Networks

Carbon nanotubes (CNTs) have been explored in nanoelectronics to realize desirable device performances. Thus, carbon nanotube network field-effect transistors (CNTNFETs) have been developed directly by means of alcohol catalytic chemical vapor deposition (ACCVD) method using Co-Mo catalysts in this work. Various treated temperatures, growth time, and Co/Mo catalysts were employed to explore various surface morphologies of carbon nanotube networks (CNTNs) formed on the SiO2/n-type Si(100) stacked substrate. Experimental results show that most semiconducting single-walled carbon nanotube networks with 5–7 nm in diameter and low disorder-induced mode (D-band) were grown. A bipolar property of CNTNFETs synthesized by ACCVD and using HfO2as top-gate dielectric was demonstrated. Various electrical characteristics, including drain current versus drain voltage(Id-Vd), drain current versus gate voltage(Id-Vg), mobility, subthreshold slope (SS), and transconductance(Gm), were obtained.

Sign in / Sign up

Export Citation Format

Share Document