Numerical Study of the Effect of Reinforcing Elements in the Pole Field on the Strength of Non-Spherical Shells under a Pulse Load

2017 ◽  
Keyword(s):  
Numerical Study ◽  
Pulse Load ◽  
Spherical Shells

Experimental and Numerical Study on the Dynamic Buckling of Ping-pong Balls under Impact Loading

2012 ◽  
Vol 13 (1) ◽  
Author(s):  
X. W. Zhang ◽  
T. X. Yu
Keyword(s):  
Impact Loading ◽  
Numerical Study ◽  
Digital Camera ◽  
Dynamic Buckling ◽  
Spherical Shells ◽  
Static Tests ◽  
Air Gun ◽  
Ping Pong ◽  
The Impact ◽  
Force Displacement

AbstractBy means of ping-pong balls, the dynamic buckling behaviours of thin-walled spherical shells under impact loading are studied both experimentally and numerically. First, the quasi-static tests were conducted on an MTS tester, in which the ball was compressed onto a PMMA plate. Apart from the force-displacement relationship, the evolution of the contact zone between the ball and the plate was obtained by a digital camera. In the impact tests, ping-pong balls were accelerated by an air-gun and then impinged onto a rigid plate with the velocity ranging 10–45 m

scholarly journals Numerical study of the onset of thermosolutal convection in rotating spherical shells

2012 ◽  
Vol 24 (6) ◽  
pp. 064101 ◽  
Author(s):  
Marta Net ◽  
Ferran Garcia ◽  
Juan Sánchez
Keyword(s):  
Numerical Study ◽  
Thermosolutal Convection ◽  
Spherical Shells

Experimental and Numerical Study on the Dynamic Buckling of Ping-pong Balls under Impact Loading

2012 ◽  
Vol 13 (1) ◽  
Author(s):  
X. W. Zhang ◽  
T. X. Yu
Keyword(s):  
Impact Loading ◽  
Numerical Study ◽  
Digital Camera ◽  
Dynamic Buckling ◽  
Spherical Shells ◽  
Static Tests ◽  
Air Gun ◽  
Ping Pong ◽  
The Impact ◽  
Force Displacement

AbstractBy means of ping-pong balls, the dynamic buckling behaviours of thin-walled spherical shells under impact loading are studied both experimentally and numerically. First, the quasi-static tests were conducted on an MTS tester, in which the ball was compressed onto a PMMA plate. Apart from the force-displacement relationship, the evolution of the contact zone between the ball and the plate was obtained by a digital camera. In the impact tests, ping-pong balls were accelerated by an air-gun and then impinged onto a rigid plate with the velocity ranging 10–45 m

Buckling and Postbuckling Behavior of Clamped Shallow Spherical Shells Under Axisymmetric Ring Loads

1971 ◽  
Vol 38 (4) ◽  
pp. 996-1002 ◽  
Author(s):  
N. Akkas ◽  
N. R. Bauld
Keyword(s):  
Numerical Study ◽  
Postbuckling Behavior ◽  
Spherical Shells ◽  
Concentrated Load ◽  
Fixed Ring ◽  
Buckling Behavior ◽  
Load Carrying ◽  
Post Buckling ◽  
Shell Parameter ◽  
Shell Geometry

This paper presents the results of a numerical study of the buckling and initial post-buckling behavior of clamped shallow spherical shells under axisymmetric ring loads. This behavior is studied for a cap with fixed geometry when the location of the ring load is allowed to vary from the equivalent of a concentrated load at the apex to a location near the midpoint of the shell base radius, and for a fixed ring load location when the shell geometry is allowed to vary. It is found in both studies that a significant range of the geometric shell parameter λ exists such that buckling is accompanied by a loss in load-carrying capacity.

scholarly journals Stress-strain state of spherical shells with two unequal holes

2021 ◽  
Vol 258 ◽  
pp. 09085
Author(s):  
Nurilla Noraliev ◽  
Bakhrom Ishniyazov ◽  
Bunyod Safarov ◽  
Oybek Saparov
Keyword(s):  
Finite Element Method ◽  
Composite Materials ◽  
Stress Concentration ◽  
Software Package ◽  
Shell Thickness ◽  
Strain State ◽  
Numerical Study ◽  
Shear Stiffness ◽  
The Finite Element Method ◽  
Spherical Shells

This article presents the results of a numerical study of the stress concentration around two equal and unequal holes in an orthotropic spherical shell made of composite materials under the action of internal pressure. The influence of geometric (hole radii, shell thickness, distance between holes) characteristics, as well as material orthotropy and shear stiffness, on the stress state of spherical shells made of composite materials is studied. A numerical algorithm based on the finite element method has been developed and a software package has been implemented on a computer that allows solving the problem of stress concentration near two unequal holes in spherical shells made of composite materials.

Numerical study of the low-frequency atomic dynamics in a Lennard-Jones glass

1998 ◽  
Vol 77 (2) ◽  
pp. 473-484 ◽  
Author(s):  
M. Sampoli, P. Benassi, R. Dell'Anna,
Keyword(s):  
Numerical Study ◽  
Low Frequency ◽  
Lennard Jones
Sign in / Sign up

Export Citation Format

Share Document