scholarly journals Powder Bed Surface Quality and Particle Size Distribution for Metal Additive Manufacturing and Comparison with Discrete Element Model

2018 ◽  
Author(s):  
Irene Yee
Keyword(s):  
Particle Size ◽  
Additive Manufacturing ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Surface Quality ◽  
Element Model ◽  
Discrete Element ◽  
Discrete Element Model ◽  
Powder Bed ◽  
Metal Additive

scholarly journals Effect of soil particle-size distribution (PSD) on soil-subsoiler interactions in the discrete element model

2021 ◽  
Vol 19 (1) ◽  
pp. e0205
Author(s):  
Xuezhen Wang ◽  
Wuquan Wei ◽  
Jinpu He ◽  
Yuxiang Huang
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Cutting Forces ◽  
Element Model ◽  
Discrete Element ◽  
Soil Disturbance ◽  
Discrete Element Model ◽  
Distance Ratio ◽  
Dynamic Attributes

Particle-size distribution (PSD) is a key parameter affecting soil dynamic attributes and cutting forces of tillage tools in the discrete element model in accordance with our preliminary simulations. To accurately determine PSD, significance and mechanism for the effect of PSD under different nominal radii were investigated using the discrete element method (DEM) and validated using the laboratory soil-bin results. Soil disturbance characteristics (soil rupture distance ratio, height of accumulated soil, soil density change rate) and cutting forces (draft and vertical) under different treatments were predicted and measured respectively. The ANOVA outputs showed that PSD significantly affected draft and vertical forces (p

scholarly journals Plasma Spheroidisation of Irregular Ti6Al4V Powder for Powder Bed Fusion

Metals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1763
Author(s):  
Nthateng Nkhasi ◽  
Willie du Preez ◽  
Hertzog Bissett
Keyword(s):  
Particle Size ◽  
Additive Manufacturing ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Metal Powder ◽  
Weight Ratio ◽  
High Strength ◽  
Powder Bed Fusion ◽  
Metal Powders ◽  
Powder Bed

Metal powders suitable for use in powder bed additive manufacturing processes should ideally be spherical, dense, chemically pure and of a specified particle size distribution. Ti6Al4V is commonly used in the aerospace, medical and automotive industries due to its high strength-to-weight ratio and excellent corrosion resistance properties. Interstitial impurities in titanium alloys have an impact upon mechanical properties, particularly oxygen, nitrogen, hydrogen and carbon. The plasma spheroidisation process can be used to spheroidise metal powder consisting of irregularly shaped particles. In this study, the plasma spheroidisation of metal powder was performed on Ti6Al4V powder consisting of irregularly shaped particles. The properties of the powder relevant for powder bed fusion that were determined included the particle size distribution, morphology, particle porosity and chemical composition. Conclusions were drawn regarding the viability of using this process to produce powder suitable for additive manufacturing.

Investigating the Sensitivity of Particle Size Distribution on Part Geometry in Additive Manufacturing

2020 ◽  
Author(s):  
Vaishak Ramesh Sagar ◽  
Samuel Lorin ◽  
Johan Göhl ◽  
Johannes Quist ◽  
Christoffer Cromvik ◽  
...  
Keyword(s):  
Particle Size ◽  
Additive Manufacturing ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Complex Geometry ◽  
Structural Mechanics ◽  
Raw Material ◽  
Test Bed ◽  
Powder Bed ◽  
Melted Zone

Abstract Selective laser melting process is a powder bed fusion additive manufacturing process that finds applications in aerospace and medical industries for its ability to produce complex geometry parts. As the raw material used is in powder form, particle size distribution (PSD) is a significant characteristic that influences the build quality in turn affecting the functionality and aesthetics aspects of the end product. This paper investigates the effect of PSD on deformation for 316L stainless steel powder, where three coupled in-house simulation tools based on Discrete Element Method (DEM), Computational Fluid Dynamics (CFD), and Structural Mechanics are employed. DEM is used for simulating the powder distribution based on the different particle size distribution of the powder. The CFD is used as a virtual test bed to determine thermal parameters such as density, heat capacity and thermal conductivity of the powder bed viewed as a continuum. The values found as a stochastic function of the powder distribution is used to test the sensitivity of the melted zone and distortion using Structural Mechanics. Results showed significant influence of particle size distribution on the packing density, surface height, surface roughness, the stress state and displacement of the melted zone. The results will serve as a catalyst in developing geometry assurance strategies to minimize the effect of particle size distribution on the geometric quality of the printed part.

scholarly journals Effect of Particle Size Distribution on Laser Powder Bed Fusion Manufacturability of Copper

2021 ◽  
Author(s):  
Massimiliano Bonesso ◽  
Pietro Rebesan ◽  
Claudio Gennari ◽  
Simone Mancin ◽  
Razvan Dima ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Physical And Mechanical Properties ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Cooling Channels ◽  
Scan Speed

AbstractOne of the major benefits of the Laser Powder Bed Fusion (LPBF) technology is the possibility of fabrication of complex geometries and features in only one-step of production. In the case of heat exchangers in particular, this is very convenient for the fabrication of conformal cooling channels which can improve the performance of the heat transfer capability. Yet, obtaining dense copper parts printed via LPBF presents two major problems: the high reflectivity of 1 μm (the wavelength of commonly used laser sources) and the high thermal conductivity of copper that limits the maximum local temperature that can be attained. This leads to the formation of porous parts.In this contribution, the influence of the particle size distribution of the powder on the physical and mechanical properties of parts produced via LPBF is studied. Three copper powders lots with different particle size distributions are used in this study. The effect on densification from two laser scan parameters (scan speed and hatching distance) and the influence of contours scans on the lateral surface roughness is reported. Subsequently, samples manufactured with the optimal process parameters are tested for thermal and mechanical properties evaluation.

A SIMULATION STUDY ON THE EFFECT OF PARTICLE SIZE DISTRIBUTION ON THE PRINTED GEOMETRY IN SELECTIVE LASER MELTING

2021 ◽  
pp. 1-14
Author(s):  
Vaishak Ramesh Sagar ◽  
Samuel Lorin ◽  
Johan Göhl ◽  
Johannes Quist ◽  
Christoffer Cromvik ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Layer Thickness ◽  
Selective Laser Melting ◽  
Laser Melting ◽  
Powder Bed ◽  
Mean Particle Size ◽  
Final Layer ◽  
Effect Of Particle Size

Abstract Selective laser melting (SLM) process is a powder bed fusion additive manufacturing process that finds applications in aerospace and medical industries for its ability to produce complex geometry parts. As the raw material used is in powder form, particle size distribution (PSD) is a significant characteristic that influences the build quality in turn affecting the functionality and aesthetics aspects of the product. This paper investigates the effect of PSD on the printed geometry for 316L stainless steel powder, where three coupled in-house simulation tools based on Discrete Element Method (DEM), Computational Fluid Dynamics (CFD), and Structural Mechanics are employed. DEM is used for simulating the powder bed distribution based on the different powder PSD. The CFD is used as a virtual testbed to determine thermal parameters such as heat capacity and thermal conductivity of the powder bed viewed as a continuum. The values found as a stochastic function of the powder distribution is used to analyse the effect on the melted zone and deformation using Structural Mechanics. Results showed that mean particle size and PSD had a significant effect on the packing density, melt pool layer thickness, and the final layer thickness after deformation. Specifically, a narrow particle size distribution with smaller mean particle size and standard deviation produced solidified final layer thickness closest to nominal layer thickness. The proposed simulation approach and the results will catalyze in development of geometry assurance strategies to minimize the effect of particle size distribution on the geometric quality of the printed part.

Sign in / Sign up

Export Citation Format

Share Document