Crevice Corrosion of Grade-12 Titanium

2010 ◽  
pp. 281-281-19
Author(s):  
X. He ◽  
J. J. Noël ◽  
D. W. Shoesmith
Keyword(s):  
Crevice Corrosion

Microstructures of Ti-1.5 w/o Ni Alloys with Mo and A1 Additions

1975 ◽  
Vol 33 ◽  
pp. 54-55
Author(s):  
Anna C. Fraker
Keyword(s):  
Corrosion Resistance ◽  
Beneficial Effect ◽  
Crevice Corrosion ◽  
Local Corrosion ◽  
Precipitate Size ◽  
Ni Alloys

Small amounts of nickel are added to titanium to improve the crevice corrosion resistance but this results in an alloy which has sheet fabrication difficulties and is subject to the formation of large Ti2Ni precipitates. These large precipitates can serve as local corrosion sites; but in a smaller more widely dispersed form, they can have a beneficial effect on crevice corrosion resistance. The purpose of the present work is to show that the addition of a small amount of Mo to the Ti-1.5Ni alloy reduces the Ti2Ni precipitate size and produces a more elongated grained microstructure. It has recently been reported that small additions of Mo to Ti-0.8 to lw/o Ni alloys produce good crevice corrosion resistance and improved fabrication properties.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NICROFER 5716 HMoW

Alloy Digest ◽  
1985 ◽  
Vol 34 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Corrosion Cracking ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Corrosion Pitting

Abstract NICROFER 5716 HMoW is a nickel-chromium-molybdenum alloy with tungsten and extremely low carbon and silicon contents. It has excellent resistance to crevice corrosion, pitting and stress-corrosion cracking. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Ni-324. Producer or source: Vereingte Deutsche Metallwerke AG.

ALLEGHENY LUDLUM AL 22

Alloy Digest ◽  
2000 ◽  
Vol 49 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Crevice Corrosion ◽  
High Nickel ◽  
Corrosion Pitting ◽  
High Nickel Alloy

Abstract AL-22 is a wrought 22Cr-13.5Mo-3W-4Fe high-nickel alloy with outstanding and versatile corrosion resistance. The alloy is available in plate and is used where excellent corrosion, pitting, or crevice corrosion resistance is needed. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-559. Producer or source: Allegheny Ludlum Corporation.

BÖHLER A911SA EXTRA

Alloy Digest ◽  
2012 ◽  
Vol 61 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Specialty Metals

Abstract Böhler (or Boehler) A911 is a super duplex ferritic-austenitic chromium-nickel-molybdenum stainless steel with excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-1119. Producer or source: Böhler-Uddeholm Specialty Metals Inc..

SEA CURE

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
High Resistance ◽  
Brackish Water ◽  
Crevice Corrosion ◽  
Heat Treating

Abstract SEA-CURE is a ferritic stainless steel designed to provide high resistance to pitting and crevice corrosion in condensers cooled by saline or brackish water. It is used for condenser tubes and has great potential for many other uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-364. Producer or source: Trent Tube.

ALLEGHENY LUDLUM E-BRITE 26-1 ALLOY

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Refining Process ◽  
Low Carbon ◽  
Vacuum Refining ◽  
Temperature Performance ◽  
Corrosive Environments ◽  
Chloride Stress Corrosion Cracking ◽  
Low Nitrogen

Abstract ALLEGHENY LUDLUM E-BRITE 26-1 ALLOY is a low-carbon, low-nitrogen ferritic stainless steel made by a vacuum refining process. It provides: (1) Excellent resistance to pitting and crevice corrosion in chloride-containing environments, (2) Excellent resistance to chloride stress-corrosion cracking, (3) Resistance to intergranular corrosion, (4) Resistance to a wide variety of corrosive environments, and (5) Improved toughness and ductility after welding. Its applications include equipment for handling caustic, organic acids, nitric acid, bleach solutions, urea and chloride containing cooling waters. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-360. Producer or source: Allegheny Ludlum Corporation.

RMI 0.2% Pd

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Crevice Corrosion ◽  
Elevated Temperatures ◽  
Pure Titanium ◽  
Heat Treating ◽  
Low Ph ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 0.2% Pd is a grade of commercially pure titanium to which up to 0.2% palladium has been added. It has a guaranteed minimum yield strength of 40,000 psi with good ductility and formability. It is recommended for corrosion resistance in the chemical industry and other places where the environment is mildly reducing or varies between oxidizing and reducing. The alloy has improved resistance to crevice corrosion at low pH and elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-74. Producer or source: RMI Company.

URANUS 52N

Alloy Digest ◽  
1994 ◽  
Vol 43 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Flue Gas ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
Temperature Performance ◽  
Aisi Type ◽  
Better Than

Abstract URANUS 52N is a nitrogen-alloyed duplex stainless steel improved in stress-corrosion cracking resistance and with pitting and crevice corrosion resistance better than AISI Type 317L. Applications include handling phosphoric acid contaminated with chlorides and in flue gas desulfurization scrubbers. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-566. Producer or source: Creusot-Marrel.

Sign in / Sign up

Export Citation Format

Share Document