Magnetic Powder Inspection of Castings

2009 ◽  
pp. 60-60-11
Author(s):  
Clyde L. Frear
Keyword(s):  
Magnetic Powder

Status of nondestructive control of transport function metal products at JSC EVRAZ NTMK

2020 ◽  
Vol 76 (6) ◽  
pp. 586-590
Author(s):  
S. P. Bersenev ◽  
E. M. Slobtsova
Keyword(s):  
Crack Detection ◽  
Middle Part ◽  
Control Line ◽  
Magnetic Powder ◽  
Nondestructive Control ◽  
Automated Control ◽  
Ultrasonic Control ◽  
Acoustic Contact ◽  
In Series

Achievements in the area of automated ultrasonic control of quality of rails, solid-rolled wheels and tyres, wheels magnetic powder crack detection, carried out at JSC EVRAZ NTMK. The 100% nondestructive control is accomplished by automated control in series at two ultrasonic facilities RWI-01 and four facilities УМКК-1 of magnetic powder control, installed into the exit control line in the wheel-tyre shop. Diagram of location, converters displacement and control operations in the process of control at the facility RWI-01 presented, as well as the structural diagram of the facility УМКК-1. The automated ultrasonic control of rough tyres is made in the tyres control line of the wheel-tyre shop at the facility УКБ-1Д. The facility enables to control internal defects of tyres in radial, axis and circular directions of radiation. Possibilities of the facility УКБ-1Д software were shown. Nondestructive control of railway rails is made at two facilities, comprising the automated control line of the rail and structural shop. The УКР-64Э facility of automated ultrasonic rails control is intended to reveal defects in the area of head, web and middle part of rail foot by pulse echo-method with a immersion acoustic contact. The diagram of rail P65 at the facility УКР-64Э control presented. To reveal defects of the macrostructure in the area of rail head and web by mirror-shadow method, an ultrasonic noncontact electromagnetic-acoustic facility is used. It was noted, that implementation of the 100% nondestructive control into the technology of rolled stuff production enabled to increase the quality of products supplied to customers and to increase their competiveness.

Study of Novel Fe-Based Amorphous/Nanocrystalline Soft Magnetic Powder Cores with NiCuZnFe2O4 Coating Layer

2021 ◽  
Author(s):  
Chaohan Zhang ◽  
Pingjun Tao ◽  
Kunsen Zhu ◽  
Yugan Chen ◽  
Weijan Zhang ◽  
...  
Keyword(s):  
Coating Layer ◽  
Magnetic Powder ◽  
Soft Magnetic

Effects of pH shock on microaerobic activated sludge system with a graphene oxide/nano-magnetic powder composite

2020 ◽  
Vol 35 (3) ◽  
pp. 457-463
Author(s):  
Huixia Lan ◽  
Xiangzhi Wang ◽  
Shixin Qi ◽  
Da Yang ◽  
Hao Zhang
Keyword(s):  
Graphene Oxide ◽  
Activated Sludge ◽  
High Throughput Sequencing ◽  
Impact Resistance ◽  
Magnetic Powder ◽  
Blank Group ◽  
Activated Sludge System ◽  
Ph Shock ◽  
Dominant Bacteria ◽  
The Impact

AbstractUsing the acclimated activated sludge from the pulping middle-stage effluent, the effect of pH shock on the micro-oxygen activated sludge system with a nano-magnetic powder/graphene oxide composite was studied. The results showed that the removal rates of chemical oxygen demand (CODCr) and ultraviolet adsorption at 254 nm (UV254) decreased. Also, the sludge settling performance was poor due to the impact of pH, but the impact resistance of nano-magnetic powder/graphene oxide group (MGO group) was higher and the recovery was faster. Results of high throughput sequencing indicated that the diversity of microbial community was reduced by the impact of pH, but it was significantly higher in MGO group than in the blank group. The dominant bacteria after pH shock or recovery in both of the system had a large difference. The percentage of the dominant bacteria in the MGO group was higher than that in the blank group. The MGO group had higher electron transfer system (ETS) activity which made the system having a strong pH impact resistance.

Effects of Magnetic Powder Loading on Mechanical Properties and Magnetic Properties of Natural Rubber

2006 ◽  
Vol 45 ◽  
pp. 1423-1428
Author(s):  
Somsak Woramongconchai ◽  
Chatchawan Lohitvisat ◽  
Aree Wichainchai
Keyword(s):  
Mechanical Properties ◽  
Magnetic Properties ◽  
Coercive Force ◽  
Natural Rubber ◽  
Barium Ferrite ◽  
Maximum Energy ◽  
Magnetic Powder ◽  
Elongation At Break ◽  
Maximum Energy Product ◽  
Energy Product

The effect of magnetic powders and powders loading on magnetic properties and mechanical properties of magnetic rubbers were studied. The natural rubber with magnetic powders, Barium ferrite, Neodymium iron boron, were used as starting materials to prepare magnetic rubbers. Barium ferrite (BaO.6F2O3) powders had been sintered at 1285 oC for 30 hours to improve its crystal structure. The physical properties of magnetic rubbers, residual flux density (Br), coercive force (Hc), maximum energy product (BHmax), hardness and density, had a trend to increase as enhancing magnetic powders loading. However, some properties such as, intrinsic coercive force (Hci), tensile strength and elongation at break, had a trend to decrease when the magnetic powder loading was increased. Magnetic properties of the anisotropic type, sintered powders, were higher than isotropic type, non-sintered powders, except the Hci because anisotropic magnetic rubber indicated crystal orientation in the same direction.

Dependence of Damping Characteristics of a Beam with Damping Rubber Magnetic Powder on Rubber Property

2008 ◽  
Vol 21 (3) ◽  
pp. 247-256 ◽  
Author(s):  
Ming Li ◽  
Zeng He ◽  
Huiming Zheng ◽  
Ning Zhang
Keyword(s):  
Magnetic Powder ◽  
Damping Characteristics

Zirconia coating on amorphous magnetic powder by atmospheric pressure glow plasma

2001 ◽  
Vol 386 (2) ◽  
pp. 213-216 ◽  
Author(s):  
Shuhei Ogawa ◽  
Atsushi Takeda ◽  
Masahiro Oguchi ◽  
Kunihito Tanaka ◽  
Tadaaki Inomata ◽  
...  
Keyword(s):  
Atmospheric Pressure ◽  
Magnetic Powder ◽  
Zirconia Coating ◽  
Atmospheric Pressure Glow Plasma ◽  
Glow Plasma

scholarly journals High-Densification for Ferrous Soft Magnetic Powder by Metal Injection Molding - 2nd Report

2010 ◽  
Vol 57 (6) ◽  
pp. 387-391
Author(s):  
Toshiko Osada ◽  
Yoshitomo Tanaka ◽  
Hideshi Miura ◽  
Terukazu Tokuoka ◽  
Takao Nishioka
Keyword(s):  
Injection Molding ◽  
Metal Injection Molding ◽  
Magnetic Powder ◽  
Soft Magnetic
Sign in / Sign up

Export Citation Format

Share Document