The Strength of Gravel in Direct Shear

2009 ◽  
pp. 51-51-12 ◽  
Author(s):  
R. G. Hennes
Keyword(s):  
Direct Shear

Direct shear strength test on rocks along discontinuities, under laboratory conditions

2014 ◽  
Vol 9 (3) ◽  
pp. 139-150 ◽  
Author(s):  
Ildikó Buocz ◽  
Nikoletta Rozgonyi-Boissinot ◽  
Ákos Török ◽  
Péter Görög
Keyword(s):  
Shear Strength ◽  
Strength Test ◽  
Direct Shear ◽  
Shear Strength Test ◽  
Laboratory Conditions

PASSIVE WIRELESS DIRECT SHEAR STRESS MEASUREMENT

2010 ◽  
Author(s):  
J. Sells ◽  
V. Chandrasekharan ◽  
H. Zmuda ◽  
M. Sheplak ◽  
D.P. Arnold
Keyword(s):  
Shear Stress ◽  
Stress Measurement ◽  
Direct Shear

scholarly journals Sand- and Clay-Photocured-Geomembrane Interface Shear Characteristics Using Direct Shear Test

2021 ◽  
Vol 13 (15) ◽  
pp. 8201
Author(s):  
Lihua Li ◽  
Han Yan ◽  
Henglin Xiao ◽  
Wentao Li ◽  
Zhangshuai Geng
Keyword(s):  
Soil Surface ◽  
Friction Angle ◽  
Direct Shear ◽  
Tensile Crack ◽  
Shear Tests ◽  
Interface Shear ◽  
Direct Shear Tests ◽  
Carbon Black Powder ◽  
Shear Characteristics ◽  
Impermeable Layer

It is well known that geomembranes frequently and easily fail at the seams, which has been a ubiquitous problem in various applications. To avoid the failure of geomembrane at the seams, photocuring was carried out with 1~5% photoinitiator and 2% carbon black powder. This geomembrane can be sprayed and cured on the soil surface. The obtained geomembrane was then used as a barrier, separator, or reinforcement. In this study, the direct shear tests were carried out with the aim to investigate the interfacial characteristics of photocured geomembrane–clay/sand. The results show that a 2% photoinitiator has a significant effect on the impermeable layer for the photocured geomembrane–clay interface. As for the photocured geomembrane–sand interface, it is reasonable to choose a geomembrane made from a 4% photoinitiator at the boundary of the drainage layer and the impermeable layer in the landfill. In the cover system, it is reasonable to choose a 5% photoinitiator geomembrane. Moreover, as for the interface between the photocurable geomembrane and clay/sand, the friction coefficient increases initially and decreases afterward with the increase of normal stress. Furthermore, the friction angle of the interface between photocurable geomembrane and sand is larger than that of the photocurable geomembrane–clay interface. In other words, the interface between photocurable geomembrane and sand has better shear and tensile crack resistance.

A New Direct Shear Apparatus for Rock Joints Specialized in Cyclic Loading

2021 ◽  
Author(s):  
Zhen Cui ◽  
Qian Sheng ◽  
Mao-chu Zhang ◽  
Jun-feng Cao ◽  
Xian-cheng Mei ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
Rock Joints ◽  
Direct Shear ◽  
Direct Shear Apparatus

Assessment of glenoid baseplate initial micromotion and fixation strength in reverse total shoulder arthroplasty designs using a direct shear force methodology

2021 ◽  
pp. 175857322110329
Author(s):  
Therese E Parr ◽  
Jennifer K Anderson ◽  
Alan M. Marionneaux ◽  
John M Tokish ◽  
Stefan J Tolan ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Shear Force ◽  
Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder Arthroplasty ◽  
Fixation Strength ◽  
Shoulder Prosthesis ◽  
Direct Shear ◽  
Device Failure ◽  
Glenoid Baseplate ◽  
Reverse Total Shoulder

Background In a reverse total shoulder arthroplasty, the altered glenohumeral joint center of rotation subjects the glenoid baseplate to increased shear forces and potential loosening. Methods This study examined glenoid baseplate micromotion and initial fixation strength with the application of direct shear force in a Sawbone model. The reverse total shoulder arthroplasty systems examined were the DJO Reverse® Shoulder Prosthesis, the Exactech Equinoxe® Reverse System, and the Tornier AequalisTM Reverse Shoulder Prosthesis. Specimens were cyclically tested with increasing shear loads until 150 µm of displacement between the implant and glenoid was achieved, and subsequently until failure, classified as either 1 cm of implant/glenoid displacement or fracture. Results The average load withstood for the 150 µm threshold for DJO, Tornier, and Exactech was 460 ± 88 N, 525 ± 100 N, and 585 ± 160 N, respectively. The average total load at device failure for DJO, Tornier, and Exactech was 980 ± 260 N, 1260 ± 120 N, and 1350 ± 230 N, respectively. Discussion The Exactech implant design trended toward requiring more load to induce micromotion at each threshold and to induce device failure, most commonly seen as inferior screw pull out. This study proposes design features that may enhance fixation and suggests little risk of initial micromotion or failure during initial post-operative recovery.

scholarly journals Study on the Strength Performance of Recycled Aggregate Concrete with Different Ages under Direct Shearing

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2312
Author(s):  
Xin Liang ◽  
Fang Yan ◽  
Yuliang Chen ◽  
Huiqin Wu ◽  
Peihuan Ye ◽  
...  
Keyword(s):  
Shear Strength ◽  
Shear Force ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Displacement Curve ◽  
Direct Shear ◽  
Replacement Ratio ◽  
Aggregate Concrete ◽  
Concrete Failure ◽  
Load Displacement

In order to study the mechanical properties of recycled aggregate concrete (RAC) at different ages, 264 standard cubes were designed to test its direct shear strength and cube compressive strength while considering the parameters of age and recycled aggregate replacement ratio. The failure pattern and load–displacement curve of specimens at direct shearing were obtained; the direct shear strength and residual shear strength were extracted from the load–displacement curves. Experimental results indicate that the influence of the replacement ratio for the front and side cracks of RAC is insignificant, with the former being straight and the latter relatively convoluted. At the age of three days, the damaged interface between aggregate and mortar is almost completely responsible for concrete failure; in addition to the damage of coarse aggregates, aggregate failure is also an important factor in concrete failure at other ages. The load–displacement curve of RAC at direct shearing can be divided into elasticity, elastoplasticity, plasticity, and stabilization stages. The brittleness of concrete decreases with its age, which is reflected in the gradual shortening of the elastoplastic stage. At 28 days of age, the peak direct shear force increases with the replacement ratio, while the trend is opposite at ages of 3 days, 7 days, and 14 days, respectively. The residual strength of RAC decreases inversely to the replacement ratio, with the rate of decline growing over time. A two-parameter RAC direct shear strength calculation formula was established based on the analysis of age and replacement rate to peak shear force of RAC. The relationship between cube compressive strength and direct shear strength of recycled concrete at various ages was investigated.

scholarly journals Mechanical Properties and Micro Mechanism of Nano-Clay-Modified Soil Cement Reinforced by Recycled Sand

2021 ◽  
Vol 13 (14) ◽  
pp. 7758
Author(s):  
Biao Qian ◽  
Wenjie Yu ◽  
Beifeng Lv ◽  
Haibo Kang ◽  
Longxin Shu ◽  
...  
Keyword(s):  
Shear Strength ◽  
Void Ratio ◽  
Soil Mass ◽  
Direct Shear ◽  
Test Results ◽  
The Sustainable Development ◽  
Direct Shear Tests ◽  
Soil Cement ◽  
Nano Clay ◽  
New Material

To observe the effect of recycled sand and nano-clay on the improvement of the early strength of soil-cement (7d), 0%, 10%, 15% and 20% recycled sand were added. While maintaining a fixed moisture content of 30%, the ratios of each material are specified in terms of soil mass percentage. The shear strength of CSR (recycled sand blended soil-cement) was investigated by direct shear test and four groups of specimens (CSR-1, CSR-2, CSR-3 and CSR-4) were obtained. In addition, 8% nano-clay was added to four CSR groups to obtain the four groups of CSRN-1, CSRN-2, CSRN-3 and CSRN-4 (soil-cement mixed with recycled sand and nano-clay), which were also subjected to direct shear tests. A detailed analysis of the modification mechanism of soil-cement by recycled sand and nano-clay was carried out in combination with scanning electron microscopy (SEM) and IPP (ImagePro-Plus) software. The test results showed that: (1) CSR-3 has the highest shear strength due to the “concrete-like” effect of the incorporation of recycled sand. With the addition of 8% nano-clay, the overall shear strength of the cement was improved, with CSRN-2 having the best shear strength, thanks to the filling effect of the nano-clay and its high volcanic ash content. (2) When recycled sand and nano-clay were added to soil-cement, the improvement in shear strength was manifested in a more reasonable macroscopic internal structure distribution of soil-cement. (3) SEM test results showed that the shear strength was negatively correlated with the void ratio of its microstructure. The smaller the void ratio, the greater the shear strength. This shows that the use of reclaimed sand can improve the sustainable development of the environment, and at the same time, the new material of nano-clay has potential application value.

Sign in / Sign up

Export Citation Format

Share Document