Influence of Cold Rolling Threads Before or After Heat Treatment on High Strength Bolts for Different Fatigue Preload Conditions

2009 ◽  
pp. 95-95-21
Author(s):  
Nathan J. Horn ◽  
Ralph I. Stephens
Keyword(s):  
Heat Treatment ◽  
Cold Rolling ◽  
High Strength

Fabrication Process for a High Strength 9Cr-2W Steel Sheet

2010 ◽  
Vol 638-642 ◽  
pp. 2263-2267
Author(s):  
Tae Kyu Kim ◽  
Chang Hee Han ◽  
Sung Ho Kim ◽  
Chan Bock Lee
Keyword(s):  
Heat Treatment ◽  
Cold Rolling ◽  
Process Parameters ◽  
Carbon Concentration ◽  
Room Temperature ◽  
Steel Sheet ◽  
High Strength ◽  
Tensile Tests ◽  
Fabrication Process ◽  
Martensitic Steels

This study deals with the fabrication of high strength ferritic/martensitic steels by a control of both the carbon concentration and the fabrication process parameters. The 9Cr-2W steels containing a carbon concentration of 0.05, 0.07 and 0.11 wt% were normalized at 1050oC for 1 h, followed by a tempering at 550 and 750oC for 2 h, respectively. The results of the tensile tests at room temperature indicated that the tensile strengths were increased with an increase of the carbon concentration from 0.05 wt% to 0.07 wt%, but no more increase was observed when the carbon concentration was increased further up to 0.11%. After a cold rolling from a 4 mm to a 1 mm thickness without/with an intermediate heat treatment and a final heat treatment, the results of the tensile tests exhibited that superior tensile properties were obtained when the fabrication processes were composed of a tempering at 550oC, and a cold rolling with several intermediate heat treatments. These results could be attributed to the finely distributed precipitates in the partially recrystallized matrix. The optimized carbon concentration and the controlled fabrication process parameters are thus suggested to fabricate a high strength 9Cr-2W steel sheet.

A TEM microscopical investigation of the magnetic domain structure of a metastable austenitic stainless steel

1994 ◽  
Vol 52 ◽  
pp. 696-697
Author(s):  
G. Fourlaris ◽  
T. Gladman
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Cold Rolling ◽  
Solution Treatment ◽  
Magnetic Domain ◽  
High Strength ◽  
Medium Carbon Steel ◽  
Magnetic Characteristics ◽  
Metastable Austenitic Stainless Steel

Stainless steels have widespread applications due to their good corrosion resistance, but for certain types of large naval constructions, other requirements are imposed such as high strength and toughness , and modified magnetic characteristics.The magnetic characteristics of a 302 type metastable austenitic stainless steel has been assessed after various cold rolling treatments designed to increase strength by strain inducement of martensite. A grade 817M40 low alloy medium carbon steel was used as a reference material.The metastable austenitic stainless steel after solution treatment possesses a fully austenitic microstructure. However its tensile strength , in the solution treated condition , is low.Cold rolling results in the strain induced transformation to α’- martensite in austenitic matrix and enhances the tensile strength. However , α’-martensite is ferromagnetic , and its introduction to an otherwise fully paramagnetic matrix alters the magnetic response of the material. An example of the mixed martensitic-retained austenitic microstructure obtained after the cold rolling experiment is provided in the SEM micrograph of Figure 1.

CMW 100

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
High Tensile Strength ◽  
Electrical Components ◽  
Flash Welding ◽  
Hardening Heat Treatment

Abstract CMW 100 is a copper alloy that combines high tensile strength with high electrical and thermal conductivity. It responds to age-hardening heat treatment. It is used for flash welding dies, springs, electrical components, high-strength backing material for brazed assemblies, and wire guides. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-29. Producer or source: CMW Inc. Originally published as Mallory 100, August 1955, revised October 2000.

CONFLEX 720

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Copper Manganese ◽  
Hardening Heat Treatment

Abstract CONFLEX 720 is a copper-manganese-nickel alloy that responds to an age-hardening heat treatment for high strength and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Cu-143. Producer or source: Metals & Controls Inc..

UNS A97075

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Structural Applications ◽  
Structural Parts ◽  
Very High

Abstract UNS No. A97075 is a wrought precipitation-hardenable aluminum alloy. It has excellent mechanical properties, workability and response to heat treatment and refrigeration. Its typical uses comprise aircraft structural parts and other highly stressed structural applications where very high strength and good resistance to corrosion are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low temperature performance as well as forming, heat treating, and machining. Filing Code: Al-269. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document