Resistance of Aluminum-Base Alloys to 20-Year Atmospheric Exposure

2009 ◽  
pp. 21-21-26 ◽  
Author(s):  
C. J. Walton ◽  
W. King
Keyword(s):  
Atmospheric Exposure ◽  
Aluminum Base

Heterogeneous Precipitation at Dislocations

1969 ◽  
Vol 27 ◽  
pp. 70-71
Author(s):  
A. K. Eikum
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Dislocation Loops ◽  
Silver Alloys ◽  
Heterogeneous Precipitation ◽  
Precipitation Phenomena ◽  
Aluminum Base ◽  
Silver Atoms

Precipitation phenomena in concentrated aluminum-base silver alloys have been studied with a variety of techniques including electron microscopy. The purpose of the present work was to investigate the dislocation reactions that occur as silver atoms precipitate (or segregate) under a relatively low supersaturation. Specimens (0.1 mm thick) of Al-1 at. % Ag were quenched from ~500°C into an oil bath at room temperature and aged 30 min. at 265°C. The initial configurations available as sites for heterogeneous precipitation will therefore include perfect prismatic dislocation loops, Frank sessile loops and random segments of grown-in dislocations.

ALUMINUM 212

Alloy Digest ◽  
1966 ◽  
Vol 15 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Aluminum Company ◽  
Aluminum Base

Abstract Aluminum 212 is a copper, silicon, aluminum-base sand casting alloy having good machinability and good castability. It is recommended for general machinery and utility castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-153. Producer or source: Aluminum Company of America.

ALUMINUM A413.0

Alloy Digest ◽  
1984 ◽  
Vol 33 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Aluminum Base Alloy ◽  
Thin Walled ◽  
High Silicon ◽  
Aluminum Base

Abstract ALUMINUM A413.0 is a high-silicon (nominally 12%), aluminum-base alloy. It is recommended for applications where excellent castability and resistance to corrosion are required. Typical uses comprise miscellaneous thin-walled and intricately designed castings for such items as meter cases and automobile fittings. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-251. Producer or source: Various aluminum companies.

ALUMINUM 713.0

Alloy Digest ◽  
1985 ◽  
Vol 34 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Room Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Good Combination ◽  
Casting Alloy ◽  
Silicon Alloys ◽  
Aluminum Silicon Alloys ◽  
Permanent Mold Castings ◽  
Aluminum Base

Abstract ALUMINUM 713.0 is an aluminum-base casting alloy that ages at room temperature to provide high-strength sand and permanent-mold castings. It has a good combination of mechanical properties and its corrosion resistance is equivalent to that of the aluminum-silicon alloys. It is dimensionally stable. Among its many uses are housings, machinery parts, fittings, lever arms and brackets. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-263. Producer or source: Various aluminum companies.

scholarly journals Tunable Low Frequency Band Gap and Waveguide of Phononic Crystal Plates with Different Filling Ratio

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 828
Author(s):  
Shaobo Zhang ◽  
Jiang Liu ◽  
Hongbo Zhang ◽  
Shuliang Wang
Keyword(s):  
Band Gap ◽  
Composite Structure ◽  
Structural Parameters ◽  
Phononic Crystal ◽  
Low Frequency ◽  
Filling Ratio ◽  
Height Ratio ◽  
Road Vehicles ◽  
Aluminum Base ◽  
Gap Width

Aiming at solving the NVH problem in vehicles, a novel composite structure is proposed. The new structure uses a hollow-stub phononic-crystal with filled cylinders (HPFC) plate. Any unit in the plate consists of a lead head, a silicon rubber body, an aluminum base as outer column and an opposite arranged inner pole. The dispersion curves are investigated by numerical simulations and the influences of structural parameters are discussed, including traditional hollow radius, thickness, height ratio, and the new proposed filling ratio. Three new arrays are created and their spectrum maps are calculated. In the dispersion simulation results, new branches are observed. The new branches would move towards lower frequency zone and the band gap width enlarges as the filling ratio decreases. The transmission spectrum results show that the new design can realize three different multiplexing arrays for waveguides and also extend the locally resonant sonic band gap. In summary, the proposed HPFC structure could meet the requirement for noise guiding and filtering. Compared to a traditional phononic crystal plate, this new composite structure may be more suitable for noise reduction in rail or road vehicles.

Effect of Friction Stir Welding Parameters on Thermal and Tensile Behavior of Aluminum Weldments Using Double Shoulder Tools

2012 ◽  
Vol 622-623 ◽  
pp. 323-329
Author(s):  
Ebtisam F. Abdel-Gwad ◽  
A. Shahenda ◽  
S. Soher
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Welding Process ◽  
Tensile Behavior ◽  
Frictional Heat ◽  
Welding Parameters ◽  
Friction Stir ◽  
Aluminum Base ◽  
Tool Pin ◽  
Strength And Ductility

Friction stir welding (FSW) process is a solid state welding process in which the material being welded does not melt or recast. This process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters and tool pin profile play major roles in deciding the weld quality. In this investigation, an attempt has been made to understand effects of process parameters include rotation speeds, welding speeds, and pin diameters on al.uminum weldment using double shoulder tools. Thermal and tensile behavior responses were examined. In this direction temperatures distribution across the friction stir aluminum weldment were measured, besides tensile strength and ductility were recorded and evaluated compared with both single shoulder and aluminum base metal.

Evaluation Method for Time-Dependent Corrosion Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor

2009 ◽  
Vol 417-418 ◽  
pp. 417-420 ◽  
Author(s):  
Shigenobu Kainuma ◽  
Kunihiro Sugitani ◽  
Yoshihiro Ito ◽  
In Tae Kim
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior ◽  
Atmospheric Corrosion ◽  
Evaluation Method ◽  
Steel Plates ◽  
Time Dependent ◽  
Corrosion Monitoring ◽  
Corrosion Sensor ◽  
Atmospheric Exposure ◽  
Corrosive Environments

The purpose of this research is to propose a method for evaluating the time-dependent corrosion behavior of carbon steel plates using an atmospheric corrosion monitor (ACM) corrosion sensor consisting of a Fe/Ag-galvanic couple. Atmospheric exposure tests were carried out on steel　plates for periods of 6, 12, and 24-months on the island of Okinawa in Japan. The Specimens were mounted on racks at angles of 0, 45 and 90 to the horizontal to obtain corrosion data in various corrosive environments. In addition, the environments of the skyward- and groundward-facing surfaces of the specimens were monitored using ACM sensors. The sensor outputs were recorded during the exposure tests.

Sign in / Sign up

Export Citation Format

Share Document