Some Experiences in Specific Surface Measurement of Metal Powders By Low-Temperature Gas Adsorption

2009 ◽  
pp. 75-75-13
Author(s):  
J. B. Haertlein ◽  
J. F. Sachse
Keyword(s):  
Low Temperature ◽  
Specific Surface ◽  
Gas Adsorption ◽  
Surface Measurement ◽  
Metal Powders

The Effect of Hydrothermal Treatment on Samaria and Gadolinia Doped Ceria Powders Synthesized by Coprecipitation

2010 ◽  
Vol 660-661 ◽  
pp. 959-964
Author(s):  
Alexander Rodrigo Arakaki ◽  
Walter Kenji Yoshito ◽  
Valter Ussui ◽  
Dolores Ribeiro Ricci Lazar
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Hydrothermal Treatment ◽  
Specific Surface Area ◽  
Gas Adsorption ◽  
Fluorite Structure ◽  
High Specific Surface Area ◽  
Powder Synthesis ◽  
Laser Scattering ◽  
The One

One of the main applications of ceria-based (CeO2) ceramics is the manufacturing of Intermediate Temperature Solid Oxide Fuel Cells electrolytes. In order to improve ionic conductivity and densification of these materials various powder synthesis routes have been studied. In this work powders with composition Ce0.8(SmGd)0.2O1.9 have been synthesized by coprecipitation and hydrothermal treatment. A concentrate of rare earths containing 90wt% of CeO2 and other containing 51% of Sm2O3 and 30% of Gd2O3, both prepared from monazite processing, were used as precursor materials. The powders were characterized by X-ray diffraction, scanning and transmission electron microscopy, agglomerate size distribution by laser scattering and specific surface area by gas adsorption. Ceramic sinterability was evaluated by dilatometry and density measurements by Archimedes method. High specific surface area powders (~100m2/g) and cubic fluorite structure were obtained after hydrothermal treatment around 200°C. Ceramic densification was improved when compared to the one prepared from powders calcined at 800°C.

Covalent Organic Frameworks for Electrochemical Sensors: Recent Research and Future Prospects

2021 ◽  
Vol 17 ◽  
Author(s):  
Linyu Wang ◽  
Shasha Hong ◽  
Yuxi Yang ◽  
Yonghai Song ◽  
Li Wang
Keyword(s):  
Specific Surface ◽  
Electrochemical Sensors ◽  
Gas Adsorption ◽  
Low Cost ◽  
High Sensitivity ◽  
Crystalline Polymer ◽  
Synthesis Methods ◽  
High Porosity ◽  
Covalent Organic Frameworks ◽  
Covalent Bonds

Background: In recent years, electrochemical sensors are widely preferred because of their high sensitivity, rapid response, low cost and easy miniaturization. Covalent organic frameworks (COFs), a porous crystalline polymer formed by organic units connected by covalent bonds, have been widely used in gas adsorption and separation, drug transportation, energy storage, photoelectric catalysis, electrochemistry and other aspects due to their large specific surface, excellent stability, high inherent porosity, good crystallinity as well as structural and functional controllability. The topological structure of COFs can be designed in advance, the structural units and linkage are diversified, and the structure is easy to be functionalized, which are all beneficial to their application in electrochemical sensors. Methods: The types, synthesis methods, properties of covalent organic frameworks and some examples of using covalent organic frameworks in electrochemical sensors are reviewed. Results: Due to their characteristics of a large specific surface, high porosity, orderly channel and periodically arranged π electron cloud, COFs are often used to immobilize metal nanoparticles, aptamers or other materials to achieve the purpose of building electrochemical sensors with high sensitivity and good stability. Since the structure of COFs can be predicted, different organic units can build COFs with different structures and properties. Therefore, organic units with certain functional groups can be selected to build COFs with certain properties and used directly for electrochemical sensors. Conclusion: COFs have a good application prospect in electrochemical sensors.

scholarly journals Flower-like boehmite nanopowders obtained at low temperature from Bayer liquor

2020 ◽  
Vol 14 (2) ◽  
pp. 168-172
Author(s):  
Marija Milanovic ◽  
Zoran Obrenovic ◽  
Ivan Stijepovic ◽  
Ljubica Nikolic
Keyword(s):  
Low Temperature ◽  
Specific Surface ◽  
Surface Area ◽  
Industrial Production ◽  
Single Phase ◽  
Low Cost ◽  
High Specific Surface Area ◽  
Nanocrystalline Powders ◽  
Transition Alumina ◽  
Bayer Liquor

Boehmite nanocrystalline powders were obtained by neutralization of Bayer liquor at 70?C with addition of glucose. Temperature of the neutralization induced formation of the flower-like morphology of the nanopowders. XRD and FTIR results confirmed that the single phase boehmite is formed without any other impurities. Calcination at 500?C led to the formation of transition -alumina with the retention of the flower-like morphology. Both as-synthesised and calcined powders possessed high specific surface area with mesopores between 3-6 nm in diameter. Relatively low temperature of neutralization as well as the use of low cost and ecologically friendly glucose as a surfactant are very promising for the possible application in the industrial production of alumina nanopowders.

scholarly journals On competitive gas adsorption and absorption phenomena in thin films of ionic liquids

2020 ◽  
Vol 8 (23) ◽  
pp. 11781-11799
Author(s):  
Dmitry N. Lapshin ◽  
Miguel Jorge ◽  
Eleanor E. B. Campbell ◽  
Lev Sarkisov
Keyword(s):  
Thin Films ◽  
Ionic Liquids ◽  
Specific Surface ◽  
Surface Properties ◽  
Gas Adsorption ◽  
Advanced Materials ◽  
Adsorption Performance

The equipartition thickness provides a way to design advanced materials with task-specific surface properties and to predict their adsorption performance.

Influence of Acid Treatment on the Loading and Release Behavior of Halloysite with 2-Mercaptobenzothiazole

2019 ◽  
Vol 19 (11) ◽  
pp. 7178-7184 ◽  
Author(s):  
Xuteng Xing ◽  
Jihui Wang ◽  
Qiushi Li ◽  
Wenbin Hu
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Acid Treatment ◽  
Gas Adsorption ◽  
Treatment Time ◽  
Halloysite Nanotubes ◽  
Tubular Structure ◽  
Internal Diameter ◽  
Release Behavior

Halloysite nanotubes (HNTs) are natural clay minerals with a tubular structure. They have attracted considerable attention as a potential nanocontainer due to their abundance, biocompatibility and nontoxicity. In this study, HNTs were handled with H2SO4 at 70 °C. The morphology and structure of these acid-treated and original HNTs were investigated by scanning electron microscopy (SEM), energy dispersion spectrum (EDS), transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), and their specific surface area was determined by automatic gas adsorption analyzer. The loading efficiency and release behavior of acid-treated HNTs for 2-Mercaptobenzothiazole (MBT) were investigated by UV-vis spectrophotometer. Results show that acid-treated HNTs retained their tubular structure, but their internal diameter expanded by 35–37 nm after 32 h of acid treatment. After 72 h of acid treatment, HNTs can be transferred into amorphous silica nanotubes. Moreover, the specific surface area of these HNTs samples initially increased with the increase in acid treatment time but then started to decrease after 32 h. The specific surface area of acid-treated HNTs at 32 h can reach 251.6 m2/g, which was much higher than that for untreated HNTs (55.3 m2/g). In addition, the loading capacity of acid-treated HNTs can reach 32.1% for HNTs-32, which is about three times higher than that of original HNTs. The acid treatment has slight effect on the release behavior.

scholarly journals Low-temperature synthesis of zeolite from perlite waste — Part II: characteristics of the products

2014 ◽  
Vol 32 (4) ◽  
pp. 526-532 ◽  
Author(s):  
Magdalena Król ◽  
Justyna Morawska ◽  
Włodzimierz Mozgawa ◽  
Waldemar Pichór
Keyword(s):  
Phase Composition ◽  
Low Temperature ◽  
Specific Surface ◽  
Cation Exchange ◽  
Cation Exchange Capacity ◽  
Exchange Capacity ◽  
Low Temperature Synthesis ◽  
Temperature Synthesis ◽  
Synthesis Parameters ◽  
Autogenous Pressure

AbstractThe paper investigates the properties of sodium zeolites synthesized using the hydrothermal method under autogenous pressure at low temperature with NaOH solutions of varying concentrations. During this modification, zeolites X, Na-P1 and hydroxysodalite were synthesized. The synthesis parameters, and thus, phase composition of resulting samples, significantly affected the specific surface area (SSA) and cation exchange capacity (CEC). SSA increased from 2.9 m2/g to a maximum of 501.2 m2/g, while CEC rose from 16 meq/100 g to a maximum of 500 meq/100 g. The best properties for use as a sorbent were obtained for perlite waste modified with 4.0 M NaOH at 70 °C or 80 °C.

Sign in / Sign up

Export Citation Format

Share Document