Macromechanisms of Damping in Composite Structures

2009 ◽  
pp. 125-125-25 ◽  
Author(s):  
E. M. Kerwin
Keyword(s):  
Composite Structures

In Situ microscopy of the anodic etching of silicon

1995 ◽  
Vol 53 ◽  
pp. 232-233
Author(s):  
Frances M. Ross ◽  
Peter C. Searson
Keyword(s):  
Composite Structures ◽  
High Surface ◽  
High Surface Area ◽  
Chemical Properties ◽  
Selective Etching ◽  
Silicon On Insulator ◽  
Second Phase ◽  
Porous Layers ◽  
New Class ◽  
Porous Semiconductors

Porous semiconductors represent a relatively new class of materials formed by the selective etching of a single or polycrystalline substrate. Although porous silicon has received considerable attention due to its novel optical properties1, porous layers can be formed in other semiconductors such as GaAs and GaP. These materials are characterised by very high surface area and by electrical, optical and chemical properties that may differ considerably from bulk. The properties depend on the pore morphology, which can be controlled by adjusting the processing conditions and the dopant concentration. A number of novel structures can be fabricated using selective etching. For example, self-supporting membranes can be made by growing pores through a wafer, films with modulated pore structure can be fabricated by varying the applied potential during growth, composite structures can be prepared by depositing a second phase into the pores and silicon-on-insulator structures can be formed by oxidising a buried porous layer. In all these applications the ability to grow nanostructures controllably is critical.

A Numerical and Experimental Approach for Modeling Porosity Due to Entrapped Air and Volatiles Off-gassing During Manufacturing of Composite Structures

2019 ◽  
Author(s):  
Curtis Hickmott ◽  
Alireza Forghani ◽  
Victoria Hutten ◽  
Evan Lorbiecki ◽  
Frank Palmieri ◽  
...  
Keyword(s):  
Composite Structures ◽  
Experimental Approach ◽  
Entrapped Air

Torsional Analysis of a Steel Cord-Rubber Tire Belt Structure

1996 ◽  
Vol 24 (4) ◽  
pp. 339-348 ◽  
Author(s):  
R. M. V. Pidaparti
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Composite Structures ◽  
Three Dimensional ◽  
Element Model ◽  
Torsional Stiffness ◽  
Element Analysis ◽  
Rubber Belt ◽  
Steel Cord ◽  
Torsional Analysis

Abstract A three-dimensional (3D) beam finite element model was developed to investigate the torsional stiffness of a twisted steel-reinforced cord-rubber belt structure. The present 3D beam element takes into account the coupled extension, bending, and twisting deformations characteristic of the complex behavior of cord-rubber composite structures. The extension-twisting coupling due to the twisted nature of the cords was also considered in the finite element model. The results of torsional stiffness obtained from the finite element analysis for twisted cords and the two-ply steel cord-rubber belt structure are compared to the experimental data and other alternate solutions available in the literature. The effects of cord orientation, anisotropy, and rubber core surrounding the twisted cords on the torsional stiffness properties are presented and discussed.

Non-Destructive Testing of Thermoplastic Carbon Composite Structures

2020 ◽  
Vol 2020 (1) ◽  
pp. 34-52
Author(s):  
Rafał Szymański
Keyword(s):  
Composite Structures ◽  
Ultrasonic Method ◽  
Composite Panel ◽  
Aviation Industry ◽  
Non Destructive Testing ◽  
Destructive Testing ◽  
Pulse Technique ◽  
Thermoplastic Matrix ◽  
The Subject ◽  
Non Destructive

AbstractThe article is in line with the contemporary interests of companies from the aviation industry. It describes thermoplastic material and inspection techniques used in leading aviation companies. The subject matter of non-destructive testing currently used in aircraft inspections of composite structures is approximated and each of the methods used is briefly described. The characteristics of carbon preimpregnates in thermoplastic matrix are also presented, as well as types of thermoplastic materials and examples of their application in surface ship construction. The advantages, disadvantages and limitations for these materials are listed. The focus was put on the explanation of the ultrasonic method, which is the most commonly used method during the inspection of composite structures at the production and exploitation stage. Describing the ultrasonic method, the focus was put on echo pulse technique and the use of modern Phased Array heads. Incompatibilities most frequently occurring and detected in composite materials with thermosetting and thermoplastic matrix were listed and described. A thermoplastic flat composite panel made of carbon pre-impregnate in a high-temperature matrix (over 300°C), which was the subject of the study, was described. The results of non-destructive testing (ultrasonic method) of thermoplastic panel were presented and conclusions were drawn.

Thermoviscoelastic analysis of composite structures using a triangular flat shell element

AIAA Journal ◽  
1999 ◽  
Vol 37 ◽  
pp. 238-247
Author(s):  
Daniel C. Hammerand ◽  
Rakesh K. Kapania
Keyword(s):  
Composite Structures ◽  
Shell Element ◽  
Flat Shell ◽  
Flat Shell Element
Sign in / Sign up

Export Citation Format

Share Document