Biological Action of Precipitation-Process Submicron Amorphous Silica (HI-SIL 233)

2009 ◽  
pp. 144-144-30 ◽  
Author(s):  
GWH Schepers
Keyword(s):  
Amorphous Silica ◽  
Biological Action ◽  
Precipitation Process

Characterization of Rare-Earth Fluoride Anti-Stokes Phosphors by Scanning arid Transmission Electron Microscopy

1971 ◽  
Vol 29 ◽  
pp. 142-143
Author(s):  
N. M. P. Low ◽  
L. E. Brosselard
Keyword(s):  
Electron Microscopy ◽  
Rare Earth ◽  
Elevated Temperatures ◽  
Stoichiometric Composition ◽  
Rare Earth Ions ◽  
Crystalline Solid ◽  
Precipitation Process ◽  
Rare Earth Fluoride ◽  
Earth Fluoride ◽  
Rare Earth Fluorides

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.

Amorphous silica coating on α-alumina particles

1995 ◽  
Vol 53 ◽  
pp. 210-211
Author(s):  
J. W. Mellowes ◽  
C. M. Chun ◽  
I. A. Aksay
Keyword(s):  
Amorphous Silica ◽  
Heterogeneous Nucleation ◽  
Homogeneous Nucleation ◽  
Silica Coating ◽  
Full Density ◽  
Optimal Conditions ◽  
Fine Grained ◽  
Alumina Particles ◽  
Complete Mullitization ◽  
Powder Compacts

Mullite (3Al2O32SiO2) can be fabricated by transient viscous sintering using composite particles which consist of inner cores of a-alumina and outer coatings of amorphous silica. Powder compacts prepared with these particles are sintered to almost full density at relatively low temperatures (~1300°C) and converted to dense, fine-grained mullite at higher temperatures (>1500°C) by reaction between the alumina core and the silica coating. In order to achieve complete mullitization, optimal conditions for coating alumina particles with amorphous silica must be achieved. Formation of amorphous silica can occur in solution (homogeneous nucleation) or on the surface of alumina (heterogeneous nucleation) depending on the degree of supersaturation of the solvent in which the particles are immersed. Successful coating of silica on alumina occurs when heterogeneous nucleation is promoted and homogeneous nucleation is suppressed. Therefore, one key to successful coating is an understanding of the factors such as pH and concentration that control silica nucleation in aqueous solutions. In the current work, we use TEM to determine the optimal conditions of this processing.

Biorefinery implementation for recovery debottlenecking at existing pulp mills- Part II: Techno-economic evaluation

TAPPI Journal ◽  
2012 ◽  
Vol 11 (8) ◽  
pp. 17-24 ◽  
Author(s):  
HAKIM GHEZZAZ ◽  
LUC PELLETIER ◽  
PAUL R. STUART
Keyword(s):  
Cost Estimation ◽  
Process Model ◽  
Black Liquor ◽  
Pulp Mill ◽  
Value Added ◽  
Economic Assessment ◽  
Extraction Process ◽  
Estimation Methods ◽  
Precipitation Process

The evaluation and process risk assessment of (a) lignin precipitation from black liquor, and (b) the near-neutral hemicellulose pre-extraction for recovery boiler debottlenecking in an existing pulp mill is presented in Part I of this paper, which was published in the July 2012 issue of TAPPI Journal. In Part II, the economic assessment of the two biorefinery process options is presented and interpreted. A mill process model was developed using WinGEMS software and used for calculating the mass and energy balances. Investment costs, operating costs, and profitability of the two biorefinery options have been calculated using standard cost estimation methods. The results show that the two biorefinery options are profitable for the case study mill and effective at process debottlenecking. The after-tax internal rate of return (IRR) of the lignin precipitation process option was estimated to be 95%, while that of the hemicellulose pre-extraction process option was 28%. Sensitivity analysis showed that the after tax-IRR of the lignin precipitation process remains higher than that of the hemicellulose pre-extraction process option, for all changes in the selected sensitivity parameters. If we consider the after-tax IRR, as well as capital cost, as selection criteria, the results show that for the case study mill, the lignin precipitation process is more promising than the near-neutral hemicellulose pre-extraction process. However, the comparison between the two biorefinery options should include long-term evaluation criteria. The potential of high value-added products that could be produced from lignin in the case of the lignin precipitation process, or from ethanol and acetic acid in the case of the hemicellulose pre-extraction process, should also be considered in the selection of the most promising process option.

Mechanoactivation Of Rice Husk Ash In Laboratory Conditions

2019 ◽  
pp. 20-26
Keyword(s):  
Mechanical Activation ◽  
Rice Husk ◽  
Amorphous Silica ◽  
Silicon Oxide ◽  
Rice Husk Ash ◽  
Pozzolanic Activity ◽  
Maximum Solubility ◽  
Laboratory Conditions ◽  
Before And After ◽  
Mineral Additive

In many rice producing countries of the world, including in Vietnam, various research aimed at using rice husk ash (RHA) as a finely dispersed active mineral additive in cements, concrete and mortars are being conducted. The effect of the duration of the mechanoactivation of the RHA, produced under laboratory conditions in Vietnam, on its pozzolanic activity were investigated in this study. The composition of ash was investigated by laser granulometry and the values of indicators characterizing the dispersion of its particles before and after mechanical activation were established. The content of soluble amorphous silicon oxide in rice husk ash samples was determined by photocolorimetric analysis. The pizzolanic activity of the RHA, fly ash and the silica fume was also compared according to the method of absorption of the solution of the active mineral additive. It is established that the duration of the mechanical activation of rice husk ash by grinding in a vibratory mill is optimal for increasing its pozzolanic activity, since it simultaneously results in the production of the most dispersed ash particles with the highest specific surface area and maximum solubility of the amorphous silica contained in it. Longer grinding does not lead to further reduction in the size of ash particles, which can be explained by their aggregation, and also reduces the solubility of amorphous silica in an aqueous alkaline medium.

Fungicidal and Bactericidal Activity of the Alkyl-Substituted Guanidine-Containing Oligomers

2020 ◽  
Vol 82 (6) ◽  
pp. 54-63
Author(s):  
M.Ya. Vortman ◽  
◽  
Yu.B. Pysmenna ◽  
A.I. Chuenko ◽  
D.R. Abdulina ◽  
...  
Keyword(s):  
Heterotrophic Bacteria ◽  
Trichoderma Viride ◽  
Rhodococcus Erythropolis ◽  
Biological Action ◽  
Molar Ratio ◽  
Diffusion Method ◽  
Klebsiella Pneumonia ◽  
Alkyl Bromides ◽  
Base Form ◽  
Two Stages

Biocides are widely used in medicine and various industries to protect against a number of harmful microorganisms. Organic quaternary ammonium and guanidine-containing compounds, the biological action of which is based on membrane-toxic properties, are used as bactericidal preparations. The aim of this work was to study the bactericidal and fungicidal activities of the synthesized oligomeric alkylsubstituted guanidinium bromides with different radicals -C3H7, -C7H15, -C10H21, against different isolates of heterotrophic bacteria and microscopic fungi. Methods. The synthesis of alkyl-substituted guanidiniumcontaining oligomers was performed in two stages. In the first stage, alkyl-substituted guanidine was obtained by the reaction of guanidine, previously converted by alkali from the salt form to the base form by the base and alkyl bromides (Alk=-C3H7 (propyl), -C7H15 (heptyl), -C10H21 (decyl)) in methanol at a temperature of 50°C and a molar ratio of 1:1. The second carried out the reaction between aromatic oligoepoxide DER-331 and alkyl-substituted guanidine in methanol at a temperature of 50°C for 2–3 hours and a molar ratio of 1:2. Bacteria were grown on meat-peptone agar for 48 hours at a temperature of 28±2°С. Test cultures of micromycetes were cultured on agar beer wort (6°B), incubated for 14 days in a thermostat at a temperature of 28±2°C. Antimicrobial activity of newly synthesized alkyl-substituted guanidinium-containing oligomers was determined by standard disco-diffusion method (method of disks on agar) and fungicidal activity was determined by the method of holes in agar. Results. Oligomeric alkylsubstituted guanidinium bromides with different radicals composed -C3H7, -C7H15, -C10H21- synthesized by the reaction of guanidine alkyl bromides with aromatic oligoepoxydes. It was found that alkyl-substituted guanidinium-containing oligomers at a concentration of 1–3% inhibited the growth of Escherichia coli 475, Pseudomonas aeruginosa 465, Klebsiella pneumonia 479, Pseudomonas pseudoalcaligenes 109, Staphylococcus aureus 451, E. faecalis 422, Rhodococcus erythropolis 102, Bacillus subtilis 138 and most of the studied micromycetes – Aureobasidium pullulans F-41430, Paecilomyces variotii F-41432, Penicillium funiculosum F-41435, Penicillium ochrochloron F-41431, Scopulariopsis brevicaulis F-41434, Trichoderma viride F-41437, Candida albicans F-41441, Aspergillus flavus F-41442, Aspergillus niger F-41448, Penicillium sp. F-41447. Conclusions. Antimicrobial and fungicidal properties significantly depend on the length of the alkyl radical, with increasing of its length the diameter of the zone of bacterial and micromycetes growth retardation increases.10.15407/microbiolj82.06.054

Pharmacognostical and pharmacological activity of Justicia gendarussa burm.f.: a comprehensive review

2020 ◽  
Vol 11 (3) ◽  
pp. 3384-3390
Author(s):  
Ashish ◽  
Anjali ◽  
Dixit Praveen K ◽  
Nagarajan K ◽  
Sahoo Jagannath
Keyword(s):  
Pharmacological Activity ◽  
Chemical Constituents ◽  
Biological Action ◽  
Andaman Islands ◽  
Comprehensive Review ◽  
Medicinal Value ◽  
Anti Oxidant ◽  
Phytochemical Constituents ◽  
Pharmacologically Active ◽  
Different Parts

Justicia gendarussa Burm .f. (family Acanthaceae) which is also known as willow-leaves and commonly known as Nili-Nirgundi, it is very commonly found nearby to China and its availability is very common in larger parts of India and Andaman islands. Traditionally it is used to treat various sorts of disorders such as wound healing, anti-inflammatory, anti-oxidant, antiproliferative, anti-arthritic etc. Justicia gendarussa is one of the crucial herbs which has been used in the Ayurveda. Majorly leaves parts of the plant shows the pharmacological activity but the root of the plant Justicia gendarussa is also have the important medicinal values. A large variety of pharmacologically active constituents i.e., alkaloids, flavonoids, saponin, carbohydrates, steroids, triterpenoids, carotenoids, aminoacids, tannins, phenolics, coumarines and anthaquinones are also present in this plant and they makes the plant pharmacologically important. The activity of the plant is also dependent on the solvent which is used for the extraction the various vital chemical constituents. The different- different parts of the plants having the different medicinal values also differ in the chemical values. This review is not only focused on the essential phytochemical constituents which is available in the plant but it also explains their necessary medicinal value to shows the essential biological action and phytopharmacological actions of various parts of the plant.

Experimental Studies Concerning the Semipermeable Membrane Separation Efficiency for 134Cs, 137Cs, 57Co, 58Co, 60Co, 54Mn in Liquid Radioactive Waste I. Treatment of secondary waste from POD decontamination procedure

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Mirela Dulama ◽  
Nicoleta Deneanu ◽  
Cristian Dulama ◽  
Margarit Pavelescu
Keyword(s):  
Membrane Separation ◽  
Separation Efficiency ◽  
Liquid Radioactive Waste ◽  
Experimental Studies ◽  
Experimental Tests ◽  
Suspended Solid ◽  
Process Efficiency ◽  
Active Charcoal ◽  
Precipitation Process ◽  
Pre Treatment

The paper presents the experimental tests concerning the treatment by membrane techniques of radioactive aqueous waste. Solutions, which have been treated by using the bench-scale installation, were radioactive simulated secondary wastes from the decontamination process with modified POD. Generally, an increasing of the retention is observed for most of the contaminants in the reverse osmosis experiments with pre-treatment steps. The main reason for taking a chemical treatment approach was to selectively remove soluble contaminants from the waste. In the optimization part of the precipitation step, several precipitation processes were compared. Based on this comparison, mixed [Fe(CN)6]4-/Al3+/Fe2+ was selected as a precipitation process applicable for precipitation of radionuclides and flocculation of suspended solid. Increased efficiencies for cesium radionuclides removal were obtained in natural zeolite adsorption pre-treatment stages and this was due to the fact that volcanic tuff used has a special affinity for this element. Usually, the addition of powdered active charcoal serves as an advanced purifying method used to remove organic compounds and residual radionuclides; thus by analyzing the experimental data (for POD wastes) one can observe a decreasing of about 50% for cobalt isotopes subsequently to the active charcoal adsorption.. The semipermeable membranes were used, which were prepared by the researchers from the Research Center for Macromolecular Materials and Membranes, Bucharest. The process efficiency was monitored by gamma spectrometry.

Stabilization of Hazardous Materials into Ferrites

1991 ◽  
Vol 23 (1-3) ◽  
pp. 399-404 ◽  
Author(s):  
Y. Tamaura ◽  
P. Q. Tu ◽  
S. Rojarayanont ◽  
H. Abe
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Present Method ◽  
Hazardous Materials ◽  
Precipitation Process ◽  
Waste Waters ◽  
Formation Reaction ◽  
Coating Method ◽  
Hazardous Metal

Stabilization of the hazardous materials by the Fe3O4-coating method was studied. In the ferrite-formation reaction in the aqueous solution, the adsorption of the metal ions and the oxidation of the adsorbed Fe(II) ions are repeated on the surface of the ferrite particles. This reaction was adopted to the coating of the hazardous materials with the Fe3O4(or ferrite). By repeating the two steps of l)the addition of the Fe(II) aqueous solution into the suspension of the hazardous materials, and 2)the oxidation by passing air through the reaction suspension, with the Fe3O4 layer, we could coat the surfaces of the hazardous materials, such as the heavy metal sludge from the neutralization-precipitation process, the CaF2 precipitates in the treatment of the waste waters containing fluoride ion along with hazardous metal ions, and the soils containing Cd(II) ion. These Fe3O4-coated hazardous materials are very stable and no heavy metal ions are leached under the normal environmental conditions. The ferrite sludges formed in the “Ferrite Process” were highly stabilized by the present method, and by the heat-treatment.

Performance Stability of Small Biological Chemical Treatment Plants

1990 ◽  
Vol 22 (3-4) ◽  
pp. 275-282
Author(s):  
R. Storhaug
Keyword(s):  
Activated Sludge ◽  
Chemical Treatment ◽  
Chemical Precipitation ◽  
Poor Quality ◽  
Precipitation Process ◽  
Chemical Plants ◽  
Effluent Standards ◽  
Main Portion ◽  
Rotating Biological Contactors ◽  
Number Of Treatment

Biological and chemical treatment plants constitute a main portion of the overall number of treatment plants in Norway. The biological and chemical plants are divided into three process groups, simultaneous precipitation and activated sludge, combined precipitation and rotating biological contactors (RBC) and post precipitation and activated sludge. Aluminium sulphate or ferric chloride are the commonly used flocculants in the chemical precipitation process. Effluent data from 174 Norwegian biological chemical treatment plants are evaluated. Compared to the effluent standards for each process group, post precipitation shows the best performance. On an average these plants have the lowest actual utilization of the design capacity. The most important factors that cause the treatment plants not to meet the effluent standards are, poor quality of the sewer system, improper design of the plant and organizational problems. Satisfactory separation of particles, flow equalization and proper operational management, are the basic demands to achieve low effluent concentrations for tot-P and BOD7.

Sign in / Sign up

Export Citation Format

Share Document