Delayed Hydrogen Cracking Velocity and J-Integral Measurements on Irradiated BWR Cladding

2008 ◽  
pp. 711-711-18 ◽  
Author(s):  
V Grigoriev ◽  
R Jakobsson
Keyword(s):  
J Integral ◽  
Hydrogen Cracking

Rubber Fracture Characterization Using J-Integral

1988 ◽  
Vol 16 (1) ◽  
pp. 44-60 ◽  
Author(s):  
C. L. Chow ◽  
J. Wang ◽  
P. N. Tse
Keyword(s):  
Crack Initiation ◽  
Carbon Black ◽  
Natural Rubber ◽  
Fracture Parameter ◽  
J Integral ◽  
Specimen Length ◽  
Fracture Characterization ◽  
Premature Failure ◽  
Testing Procedures ◽  
Material Evaluation

Abstract The use of the J-integral to investigate fracture characterization in a carbon black reinforced natural rubber is described. Three applications to crack initiation are included: two based on the use of a hypothetical zero specimen length and one on conventional testing procedures for metals. While the validity of the zero-length methods is questionable, the conventional method yielded a consistent Jc value of 1.01 N/mm for a typical tire compound. This value was obtained from 24 combinations of varying specimen geometries and pre-crack lengths. The J-integral is revealed as a valid fracture parameter that is applicable not only for material evaluation but also for designing tire structures to resist premature failure. These conclusions disagree with those from an earlier investigation, so the causes for the discrepancies are examined and discussed.

An Alternative Technique to Evaluate Crack Propagation Path in Hyperelastic Materials

2012 ◽  
Vol 40 (1) ◽  
pp. 42-58 ◽  
Author(s):  
R. R. M. Ozelo ◽  
P. Sollero ◽  
A. L. A. Costa
Keyword(s):  
Constitutive Model ◽  
Crack Propagation ◽  
Experimental Tests ◽  
Growth Direction ◽  
Propagation Path ◽  
J Integral ◽  
Alternative Technique ◽  
Crack Propagation Path ◽  
Hyperelastic Materials ◽  
Material Constitutive Model

Abstract REFERENCE: R. R. M. Ozelo, P. Sollero, and A. L. A. Costa, “An Alternative Technique to Evaluate Crack Propagation Path in Hyperelastic Materials,” Tire Science and Technology, TSTCA, Vol. 40, No. 1, January–March 2012, pp. 42–58. ABSTRACT: The analysis of crack propagation in tires aims to provide safety and reliable life prediction. Tire materials are usually nonlinear and present a hyperelastic behavior. Therefore, the use of nonlinear fracture mechanics theory and a hyperelastic material constitutive model are necessary. The material constitutive model used in this work is the Mooney–Rivlin. There are many techniques available to evaluate the crack propagation path in linear elastic materials and estimate the growth direction. However, most of these techniques are not applicable to hyperelastic materials. This paper presents an alternative technique for modeling crack propagation in hyperelastic materials, based in the J-Integral, to evaluate the crack path. The J-Integral is an energy-based parameter and is applicable to nonlinear materials. The technique was applied using abaqus software and compared to experimental tests.

Prediction of crack growth initiation in paper structures using a J-integral criterion

2000 ◽  
Vol 15 (1) ◽  
pp. 4-11 ◽  
Author(s):  
Pär Wellmar ◽  
Øyvind Weiby Gregersen ◽  
Christer Fellers
Keyword(s):  
Crack Growth ◽  
J Integral ◽  
Integral Criterion ◽  
Growth Initiation

Fracture and Fatigue Resistance of Ultrafine Grain CuCrZr Alloy Produced ECAP

2006 ◽  
Vol 503-504 ◽  
pp. 811-816 ◽  
Author(s):  
Alexei Vinogradov ◽  
Kazuo Kitagawa ◽  
V.I. Kopylov
Keyword(s):  
Growth Rate ◽  
Crack Growth Rate ◽  
Crack Growth ◽  
Stable Crack Growth ◽  
Ultrafine Grain ◽  
J Integral ◽  
Present Communication ◽  
Angular Pressing ◽  
Fatigue And Fracture ◽  
Anisotropy Of Mechanical Properties

Anisotropy of mechanical properties, fatigue and fracture resistance of precipitation hardened CuCrZr alloy ultrafine (UFG) grained by equal-channel angular pressing (ECAP) is in focus of the present communication. Fracture toughness was estimated in terms of J-integral and the fatigue crack growth rate was quantified. It was found that although the estimated JIC-value appeared lower than that reported in the literature for a reference alloy, the ductility, fracture and crack growth resistance remained satisfactory after ECAP while the tensile strength and fatigue limit improved considerably. The stable crack growth rate did not differ very much for ECAP and reference conventional CuCrZr and no remarkable anisotropy in the stable crack growth was noticed.

scholarly journals Fracture Mechanical Analysis of Thin-Walled Cylindrical Shells with Cracks

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 592
Author(s):  
Feng Yue ◽  
Ziyan Wu
Keyword(s):  
Fracture Mechanics ◽  
Tensile Stress ◽  
Failure Modes ◽  
Cylindrical Shells ◽  
Crack Tip ◽  
Mechanical Analysis ◽  
J Integral ◽  
Thin Walled Structures ◽  
Circumferential Tensile Stress ◽  
Thin Walled

The fracture mechanical behaviour of thin-walled structures with cracks is highly significant for structural strength design, safety and reliability analysis, and defect evaluation. In this study, the effects of various factors on the fracture parameters, crack initiation angles and plastic zones of thin-walled cylindrical shells with cracks are investigated. First, based on the J-integral and displacement extrapolation methods, the stress intensity factors of thin-walled cylindrical shells with circumferential cracks and compound cracks are studied using linear elastic fracture mechanics, respectively. Second, based on the theory of maximum circumferential tensile stress of compound cracks, the number of singular elements at a crack tip is varied to determine the node of the element corresponding to the maximum circumferential tensile stress, and the initiation angle for a compound crack is predicted. Third, based on the J-integral theory, the size of the plastic zone and J-integral of a thin-walled cylindrical shell with a circumferential crack are analysed, using elastic-plastic fracture mechanics. The results show that the stress in front of a crack tip does not increase after reaching the yield strength and enters the stage of plastic development, and the predicted initiation angle of an oblique crack mainly depends on its original inclination angle. The conclusions have theoretical and engineering significance for the selection of the fracture criteria and determination of the failure modes of thin-walled structures with cracks.

scholarly journals Advantageous Description of Short Fatigue Crack Growth Rates in Austenitic Stainless Steels with Distinct Properties

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 475
Author(s):  
Lukáš Trávníček ◽  
Ivo Kuběna ◽  
Veronika Mazánová ◽  
Tomáš Vojtek ◽  
Jaroslav Polák ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Stainless Steels ◽  
Growth Rates ◽  
Large Scale ◽  
J Integral ◽  
Scale Yielding ◽  
Residual Fatigue ◽  
Crack Growth Rates

In this work two approaches to the description of short fatigue crack growth rate under large-scale yielding condition were comprehensively tested: (i) plastic component of the J-integral and (ii) Polák model of crack propagation. The ability to predict residual fatigue life of bodies with short initial cracks was studied for stainless steels Sanicro 25 and 304L. Despite their coarse microstructure and very different cyclic stress–strain response, the employed continuum mechanics models were found to give satisfactory results. Finite element modeling was used to determine the J-integrals and to simulate the evolution of crack front shapes, which corresponded to the real cracks observed on the fracture surfaces of the specimens. Residual fatigue lives estimated by these models were in good agreement with the number of cycles to failure of individual test specimens strained at various total strain amplitudes. Moreover, the crack growth rates of both investigated materials fell onto the same curve that was previously obtained for other steels with different properties. Such a “master curve” was achieved using the plastic part of J-integral and it has the potential of being an advantageous tool to model the fatigue crack propagation under large-scale yielding regime without a need of any additional experimental data.

Methodology for calculating J-integral range ΔJ under cyclic loading

2021 ◽  
Vol 191 ◽  
pp. 104343
Author(s):  
Seiya Hagihara ◽  
Nobuyuki Shishido ◽  
Yutaka Hayama ◽  
Noriyuki Miyazaki
Keyword(s):  
Cyclic Loading ◽  
J Integral ◽  
Integral Range
Sign in / Sign up

Export Citation Format

Share Document