Strength and Fracture Characteristics of Graphite-Glass Intraply Hybrid Composites

2009 ◽  
pp. 183-183-17
Author(s):  
NM Bhatia
Keyword(s):  
Hybrid Composites ◽  
Fracture Characteristics

Electron Microscopy of Metal-Matrix Composites

1970 ◽  
Vol 28 ◽  
pp. 404-405
Author(s):  
A. Lawley ◽  
M. R. Pinnel ◽  
A. Pattnaik
Keyword(s):  
Electron Microscopy ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Critical Evaluation ◽  
Elastic Behavior ◽  
Matrix Composites ◽  
Directionally Solidified ◽  
Fracture Characteristics ◽  
Broad Program

As part of a broad program on composite materials, the role of the interface on the micromechanics of deformation of metal-matrix composites is being studied. The approach is to correlate elastic behavior, micro and macroyielding, flow, and fracture behavior with associated structural detail (dislocation substructure, fracture characteristics) and stress-state. This provides an understanding of the mode of deformation from an atomistic viewpoint; a critical evaluation can then be made of existing models of composite behavior based on continuum mechanics. This paper covers the electron microscopy (transmission, fractography, scanning microscopy) of two distinct forms of composite material: conventional fiber-reinforced (aluminum-stainless steel) and directionally solidified eutectic alloys (aluminum-copper). In the former, the interface is in the form of a compound and/or solid solution whereas in directionally solidified alloys, the interface consists of a precise crystallographic boundary between the two constituents of the eutectic.

Morphology and properties of PA6 hybrid composites filled with short carbon fibers and organoclay

2016 ◽  
Vol 2 (3) ◽  
pp. 47-57 ◽  
Author(s):  
S.S. Pesetskii ◽  
S.P. Bogdanovich ◽  
V.V. Dubrovskii ◽  
T.M. Sodyleva ◽  
V.N. Aderikha ◽  
...  
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composites ◽  
Short Carbon

Influence of Multiwall Carbon Nanotube on mechanical and wear properties of Copper – Iron composite

2020 ◽  
Vol 17 (1) ◽  
pp. 7570-7576 ◽  
Author(s):  
H. Sh. Hammood ◽  
S. S. Irhayyim ◽  
A. Y. Awad ◽  
H. A. Abdulhadi
Keyword(s):  
Carbon Nanotubes ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Hydraulic Press ◽  
Dry Sliding Wear ◽  
Multiwall Carbon Nanotube ◽  
Wear Properties ◽  
Sem Images ◽  
Wear Rates ◽  
Multiwall Carbon

Multiwall Carbon nanotubes (MWCNTs) are frequently attractive due to their novel physical and chemical characteristics, as well as their larger aspect ratio and higher conductivity. Therefore, MWCNTs can allow tremendous possibilities for the improvement of the necessarily unique composite materials system. The present work deals with the fabrication of Cu-Fe/CNTs hybrid composites manufactured by powder metallurgy techniques. Copper powder with 10 vol. % of iron powder and different volume fractions of Multi-Wall Carbon Nanotubes (MWCNTs) were mixed to get hybrid composites. The hybrid composites were fabricated by adding 0.3, 0.6, 0.9, and 1.2 vol.% of MWCNTs to Cu- 10% Fe mixture using a mechanical mixer. The samples were compressed under a load of 700 MPa using a hydraulic press to compact the samples. Sintering was done at 900°C for 2 h at 5ºC/min heating rate. The microscopic structure was studied using a Scanning Electron Microscope (SEM). The effect of CNTs on the mechanical and wear properties, such as micro-hardness, dry sliding wear, density, and porosity were studied in detail. The wear tests were carried out at a fixed time of 20 minutes while the applied loads were varied (5, 10, 15, and 20 N). SEM images revealed that CNTs were uniformly distributed with relative agglomeration within the Cu/Fe matrix. The results showed that the hardness, density, and wear rates decreased while the percentage of porosity increased with increasing the CNT volume fraction. Furthermore, the wear rate for all the CNTs contents increased with the applied load.

Brittle Fracture Characteristics of Multiple Notches in Parallel and Parallel-staggered Arrangement

1975 ◽  
Vol 15 (1) ◽  
pp. 11-18
Author(s):  
Hiroshi MAENAKA ◽  
Shigeru KITAMURA ◽  
Kin-ichi NAGAI ◽  
Kazuo IKEDA ◽  
Katsuya KAJIMOTO ◽  
...  
Keyword(s):  
Brittle Fracture ◽  
Fracture Characteristics ◽  
Staggered Arrangement
Sign in / Sign up

Export Citation Format

Share Document