Fast Fracture Toughness and Crack Arrest Toughness of Reactor Pressure Vessel Steel

2009 ◽  
pp. 289-289-32 ◽  
Author(s):  
GT Hahn ◽  
RG Hoagland ◽  
J Lereim ◽  
AJ Markworth ◽  
AR Rosenfield
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Crack Arrest ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Reactor Pressure Vessel Steel ◽  
Arrest Toughness ◽  
Reactor Pressure ◽  
Fast Fracture

Fracture Toughness Evaluation of Heat-Affected Zone Under Weld Overlay Cladding in Reactor Pressure Vessel Steel

2018 ◽  
Author(s):  
Yoosung Ha ◽  
Tohru Tobita ◽  
Hisashi Takamizawa ◽  
Satoshi Hanawa ◽  
Yutaka Nishiyama
Keyword(s):  
Fracture Toughness ◽  
Base Metal ◽  
Heat Affected Zone ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Weld Overlay ◽  
Reactor Pressure Vessel Steel ◽  
Reactor Pressure

An evaluation of the fracture toughness of the heat-affected zone (HAZ), which is located under the weld overlay cladding of a reactor pressure vessel (RPV), was performed. Considering inhomogeneous microstructures of the HAZ, 0.4T-C(T) specimens were manufactured from the cladding strips locations, and Mini-C(T) specimens were fabricated from the distanced location as well as under the cladding. The reference temperature (To) of specimens that were aligned with the middle section of a cladding strip (HAZMCS) was ∼12°C higher than that of specimens that were aligned with cladding strips at the overlap (HAZOCS). To values of partial area in the HAZ were obtained using Mini-C(T) specimen. The To values obtained near the side of the cladding were ∼13°C higher than those away from the cladding. To values of HAZ for both 0.4T-C(T) and Mini-C(T) specimens were significantly lower than that of the base metal at a quarter thickness by 40°C–60°C. Compared to the literature data that indicated fracture toughness at the surface without overlay cladding and base metal of a quarter thickness in a pressure vessel plate, this study concluded that the welding thermal history showed no significant effect on the fracture toughness of the inner surface of RPV steel.

Fracture Toughness Evaluation of Neutron-Irradiated Reactor Pressure Vessel Steel Using Miniature-C(T) Specimens

2017 ◽  
Author(s):  
Yoosung Ha ◽  
Tohru Tobita ◽  
Hisashi Takamizawa ◽  
Yutaka Nishiyama
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Reactor Pressure Vessel Steel ◽  
Rpv Steel ◽  
Toughness Evaluation ◽  
Fracture Toughness Evaluation ◽  
Reactor Pressure

The applicability of miniature-C(T) (Mini-C(T)) specimens to fracture toughness evaluation was investigated for neutron-irradiated reactor pressure vessel (RPV) steel. By carefully selecting the test temperature, valid fracture toughness and reference temperature (To) were determined successfully with a relatively small number of specimens. The value of To determined using irradiated Mini-C(T) specimens was in good agreement with that determined using irradiated pre-cracked Charpy-type (PCCv) specimens. In addition, the scatter of the 1T-equivalent fracture toughness values obtained using the irradiated Mini-C(T) specimens was not significantly different from that obtained using the irradiated PCCv and other larger unirradiated specimens. The To values determined using Mini-C(T) specimens agree very well with the correlation between the Charpy 41J transition temperature and the To of commercially manufactured RPV steels reported in the past.

Sign in / Sign up

Export Citation Format

Share Document