Radiation Effects on the Metallurgical Fracture Parameters and Fracture Toughness of Pressure Vessel Steels

2009 ◽  
pp. 20-20-20 ◽  
Author(s):  
RA Wullaert ◽  
DR Ireland ◽  
AS Tetelman
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Radiation Effects ◽  
Fracture Parameters ◽  
Pressure Vessel Steels

Evaluating the fracture toughness of layered pressure vessel steels

2019 ◽  
Vol 207 ◽  
pp. 149-164
Author(s):  
James A. Joyce ◽  
Doug Wells ◽  
Brian Stoltz ◽  
Levi Shelton ◽  
Preston Jacobs ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Pressure Vessel Steels

Fracture Toughness of Highly Irradiated Pressure Vessel Steels in the Upper Shelf Temperature

2006 ◽  
Author(s):  
Hiroshi Matsuzawa ◽  
Toru Osaki
Keyword(s):  
Fracture Toughness ◽  
Chemical Composition ◽  
Reference Material ◽  
Fast Neutron ◽  
Pressure Vessel ◽  
Charpy Impact ◽  
Pressure Vessels ◽  
Shelf Energy ◽  
Pressure Vessel Steels ◽  
Reactor Pressure

Nine Reactor Pressure Vessel (RPV) Steels and four RPV weld were irradiated up to 1.2 × 1024n/m2 fast neutron fluence (E>1MeV), and their fracture toughness and Charpy impact energy were measured. As chemical compositions, such as Cu, are known to affect the fracture toughness reduction due to neutron exposure, the above steels were fabricated by changing chemical composition widely to cover the chemical composition of the RPV materials of the operating Japanese nuclear power plants. 2.7 mm thick compact specimens were used to measure the upper shelf fracture toughness of highly irradiated materials, and their Charpy upper shelf energy was also measured. By correlating Charpy upper shelf energy to fracture toughness, the upper shelf fracture toughness evaluation formulae for highly irradiated reactor pressure vessel steels were developed. Both compact and V-notched Charpy impact specimens were irradiated in a test reactor. The fast neutron flux above 1MeV was about 5 × 1016n/(m2s). Charpy impact specimens made of Japanese PWR reference material containing 0.09w% Cu were irradiated simultaneously. The upper shelf energy of the reference material up to the medium fluence level showed little difference in the reduction of upper shelf energy to that which had been in the operating plant and which was irradiated to the same fluence. The developed correlation formulae have been adopted in the Japan Electric Association Code as new formulae to predict the fracture toughness in the upper shelf region of reactor pressure vessels. They will be applied to time limited ageing analysis of low upper shelf reactor pressure vessels in Japan, on a concrete technical basis in very high fluence regions.

Estimation of Master Curve Based RTTo Reference Temperature From CVN Data

2005 ◽  
Author(s):  
Kim R. W. Wallin ◽  
Gerhard Nagel ◽  
Elisabeth Keim ◽  
Dieter Siegele
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Brittle Failure ◽  
Master Curve ◽  
Simple Relation ◽  
Systematic Evaluation ◽  
Data Sets ◽  
Irradiation Embrittlement ◽  
Pressure Vessel Steels ◽  
Asme Code

The ASME code cases N-629 and N-631 permits the use of a Master Curve-based index temperature (RTTo ≡ T0 + 19.4°C) as an alternative to traditional RTNDT-based methods of positioning the ASME KIc, and KIR curves. This approach was adopted to enable use of Master Curve technology without requiring the wholesale changes to the structure of the ASME Code that would be needed to use all aspects of Master Curve technology. For the brittle failure analysis considering irradiation embrittlement additionally a procedure to predict the adjustment of fracture toughness for EOL from irradiation surveillance results must be available as by NRC R.G. 1.99 Rev. 2 e.g.: ART = Initial RTNDT + ΔRTNDT + Margin. The conservatism of this procedure when RTNDT is replaced by RTTo is investigated for western nuclear grade pressure vessel steels and their welds. Based on a systematic evaluation of nearly 100 different irradiated material data sets, a simple relation between RTToirr, RTToref and ΔT41JRG is proposed. The relation makes use of the R.G. 1.99 Rev. 2 and enables the minimizing of margins, necessary for conventional correlations based on temperature shifts. As an example, the method is used to assess the RTTo as a function of fluence for several German pressure vessel steels and corresponding welds. It is shown that the method is robust and well suited for codification.

Sign in / Sign up

Export Citation Format

Share Document