Life Prediction of Circumferentially Grooved Components under Low-Cycle Fatigue

2009 ◽  
pp. 402-402-20
Author(s):  
K Hatanaka ◽  
T Fujimitsu ◽  
S Shiraishi ◽  
J Omori
Keyword(s):  
Life Prediction ◽  
Low Cycle Fatigue ◽  
Cycle Fatigue

A weight function method for multiaxial low-cycle fatigue life prediction under variable amplitude loading

2018 ◽  
Vol 53 (4) ◽  
pp. 197-209 ◽  
Author(s):  
Xiao-Wei Wang ◽  
De-Guang Shang ◽  
Yu-Juan Sun
Keyword(s):  
Fatigue Life ◽  
Weight Function ◽  
Life Prediction ◽  
Function Method ◽  
Low Cycle Fatigue ◽  
Fatigue Life Prediction ◽  
Cycle Fatigue ◽  
Critical Plane ◽  
Variable Amplitude ◽  
Weight Function Method

A weight function method based on strain parameters is proposed to determine the critical plane in low-cycle fatigue region under both constant and variable amplitude tension–torsion loadings. The critical plane is defined by the weighted mean maximum absolute shear strain plane. Combined with the critical plane determined by the proposed method, strain-based fatigue life prediction models and Wang-Brown’s multiaxial cycle counting method are employed to predict the fatigue life. The experimental critical plane orientation and fatigue life data under constant and variable amplitude tension–torsion loadings are used to verify the proposed method. The results show that the proposed method is appropriate to determine the critical plane under both constant and variable amplitude loadings.

LOW CYCLE FATIGUE BEHAVIOR AND LIFE PREDICTION OF A CAST COBALT-BASED SUPERALLOY

2012 ◽  
Vol 06 ◽  
pp. 251-256
Author(s):  
HO-YOUNG YANG ◽  
JAE-HOON KIM ◽  
KEUN-BONG YOO
Keyword(s):  
Fatigue Life ◽  
Strain Energy ◽  
Life Prediction ◽  
Prediction Models ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Total Strain ◽  
Cycle Fatigue ◽  
Total Strain Range ◽  
Different Temperatures

Co -base superalloys have been applied in the stationary components of gas turbine owing to their excellent high temperature properties. Low cycle fatigue data on ECY-768 reported in a companion paper were used to evaluate fatigue life prediction models. In this study, low cycle fatigue tests are performed as the variables of total strain range and temperatures. The relations between plastic and total strain energy densities and number of cycles to failure are examined in order to predict the low cycle fatigue life of Cobalt-based super alloy at different temperatures. The fatigue lives is evaluated using predicted by Coffin-Manson method and strain energy methods is compared with the measured fatigue lives at different temperatures. The microstructure observing was performed for how affect able to low-cycle fatigue life by increasing the temperature.

Anisotropic Life Prediction for Single Crystal Nickel-Base Flat Plate with a Hole

2014 ◽  
Vol 891-892 ◽  
pp. 1033-1038
Author(s):  
Cheng Li Dong ◽  
Hui Chen Yu ◽  
Ying Li
Keyword(s):  
Single Crystal ◽  
Flat Plate ◽  
Life Prediction ◽  
Failure Strain ◽  
Low Cycle Fatigue ◽  
Cycle Fatigue ◽  
The Finite Element Method ◽  
Nickel Base Superalloys ◽  
Nickel Base ◽  
Elastoplastic Constitutive Model

The material properties of single crystal (SC) superalloys are orientation-dependent. To fully exploit the material capacity, the life modeling needs to consider the anisotropy. In the present study the life modeling of SC nickel-base superalloys is considered by employing the modified Mücker's anisotropic theory in which a Hill type function is utilized for describing the anisotropic failure. Strain-controlled low cycle fatigue (LCF) experiments of SC nickel-base superalloys at different crystallographic orientations (i.e.[00, [01 and [11) under high temperatures (i.e.760°C) are carried out to verify the modeling availability for the modified Mücker's anisotropic theory. Further, based on the stress-strain field obtained by the anisotropic elastoplastic constitutive model coupled with the finite element method (FEM), the modified Mücker's anisotropic theory is employed to predict the fatigue life for SC flat plate with a hole.

A Life Prediction Model for Single-Crystal Nickel-Base Alloys Under Low-Cycle Fatigue

2020 ◽  
Author(s):  
Firat Irmak ◽  
Navindra Wijeyeratne ◽  
Taejun Yun ◽  
Ali Gordon
Keyword(s):  
Single Crystal ◽  
Gas Turbine ◽  
Life Prediction ◽  
Low Cycle Fatigue ◽  
Turbine Blades ◽  
Deformation Model ◽  
Cycle Fatigue ◽  
Nickel Base Superalloys ◽  
Nickel Base ◽  
Prediction Approach

Abstract In the development and assessment of critical gas turbine components, simulations have a crucial role. An accurate life prediction approach is needed to estimate lifespan of these components. Nickel base superalloys remain the material of choice for gas turbine blades in the energy industry. These blades are required to withstand both fatigue and creep at extreme temperatures during their usage time. Nickel-base superalloys present an excellent heat resistance at high temperatures. Presence of chromium in the chemical composition makes these alloys highly resistant to corrosion, which is critical for turbine blades. This study presents a flexible approach to combine creep and fatigue damages for a single crystal Nickel-base superalloy. Stress and strain states are used to compute life calculations, which makes this approach applicable for component level. The cumulative damage approach is utilized in this study, where dominant damage modes are capturing primary microstructural mechanism associated with failure. The total damage is divided into two distinctive modules: fatigue and creep. Flexibility is imparted to the model through its ability to emphasize the dominant damage mechanism which may vary among alloys. Fatigue module is governed by a modified version of Coffin-Manson and Basquin model, which captures the orientation dependence of the candidate material. Additionally, Robinson’s creep rupture model is applied to predict creep damage in this study. A novel crystal visco-plasticity (CVP) model is used to simulate deformation of the alloy under several different types of loading. This model has capability to illustrate the temperature-, rate-, orientation-, and history-dependence of the material. A user defined material (usermat) is created to be used in ANSYS APDL 19.0, where the CVP model is applied by User Programmable Feature (UPF). This deformation model is constructed of a flow rule and internal state variables, where the kinematic hardening phenomena is captured by back stress. Octahedral, cubic and cross slip systems are included to perform simulations in different orientations. An implicit integration process that uses Newton-Raphson iteration scheme is utilized to calculate the desired solutions. Several tensile, low-cycle fatigue (LCF) and creep experiments were conducted to inform modeling parameters for the life prediction and the CVP models.

Sign in / Sign up

Export Citation Format

Share Document