Effect of Neutron Irradiation on Thermal Conductivity of Carbon/Carbon Fiber Materials at 400 and 600°C in the Fluence Range 1 × 10

2009 ◽  
pp. 1304-1304-11
Author(s):  
BA Thiele ◽  
L Binkele ◽  
K Koizlik ◽  
H Nickel
Keyword(s):  
Thermal Conductivity ◽  
Carbon Fiber ◽  
Neutron Irradiation ◽  
Fiber Materials ◽  
Fluence Range

High thermal conductivity carbon fiber reinforced polymer based on a carbon fiber from pitch and dispersed-filled ENPB matrix

2018 ◽  
pp. 130-137
Author(s):  
E. A. Nikolaeva ◽  
A. N. Timofeev ◽  
K. V. Mikhaylovskiy
Keyword(s):  
Thermal Conductivity ◽  
Carbon Fiber ◽  
High Thermal Conductivity ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Carbon Powder ◽  
Fiber Reinforced ◽  
Thermophysical Characteristics ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This article describes the results of the development of a high thermal conductivity carbon fiber reinforced polymer based on carbon fiber from pitch and an ENPB matrix modified with a carbon powder of high thermal conductivity. Data of the technological scheme of production and the results of determining the physicomechanical and thermophysical characteristics of carbon fiber reinforced polymer are presented. 

Study of Transcrystallization in Polymer Composites

1989 ◽  
Vol 170 ◽  
Author(s):  
Benjamin S. Hsiao ◽  
J. H. Eric
Keyword(s):  
Thermal Conductivity ◽  
Free Energy ◽  
Carbon Fiber ◽  
Plasma Treatment ◽  
Polymer Composites ◽  
High Performance ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
Semicrystalline Polymers ◽  
First Case

AbstractTranscrystallization of semicrystalline polymers, such as PEEK, PEKK and PPS, in high performance composites has been investigated. It is found that PPDT aramid fiber and pitch-based carbon fiber induce a transcrystalline interphase in all three polymers, whereas in PAN-based carbon fiber and glass fiber systems, transcrystallization occurs only under specific circumstances. Epitaxy is used to explain the surface-induced transcrystalline interphase in the first case. In the latter case, transcrystallization is probably not due to epitaxy, but may be attributed to the thermal conductivity mismatch. Plasma treatment on the fiber surface showed a negligible effect on inducing transcrystallization, implying that surface-free energy was not important. A microdebonding test was adopted to evaluate the interfacial strength between the fiber and matrix. Our preliminary results did not reveal any effect on the fiber/matrix interfacial strength of transcrystallinity.

Ultrahigh Thermal Conductivity of Epoxy Composites with Hybrid Carbon Fiber and Graphene Filler

2021 ◽  
Author(s):  
Zulfiqar Ali ◽  
Xiangdong Kong ◽  
Maohua Li ◽  
Xiao Hou ◽  
Linhong Li ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Carbon Fiber ◽  
Epoxy Composites ◽  
Hybrid Carbon

In-Plane Thermal Conductivity in Thin Carbon Fiber Composites

2007 ◽  
Vol 21 (3) ◽  
pp. 460-467 ◽  
Author(s):  
Carlos A. Silva ◽  
Egidio (Ed) Marotta ◽  
Michael Schuller ◽  
Larry Peel ◽  
Mark O'Neill
Keyword(s):  
Thermal Conductivity ◽  
Carbon Fiber ◽  
Fiber Composites ◽  
Carbon Fiber Composites ◽  
Thin Carbon

A Study on Thermal and Electrical Conductivities of Ethylene-Butene Copolymer Composites with Carbon Fibers

2021 ◽  
Vol 36 (4) ◽  
pp. 417-422
Author(s):  
Y. Hamid ◽  
P. Svoboda
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Carbon Fiber ◽  
Electric Conductivity ◽  
Carbon Fibers ◽  
Mechanical Strain ◽  
Electric Resistance ◽  
Resistance Change ◽  
Electrical Conductivities ◽  
Fiber Sample

Abstract Ethylene-butene copolymer (EBC)/carbon-fiber (CF) composites can be utilized as an electromechanical material due to their ability to change electric resistance with mechanical strain. The electro-mechanical properties and thermal conductivity of ethylene butene copolymer (EBC) composites with carbon fibers were studied. Carbon fibers were introduced to EBC with various concentrations (5 to 25 wt%). The results showed that carbon fibers’ addition to EBC improves the electric conductivity up to 10 times. Increasing the load up to 2.9 MPa will raise the electric resistance change by 4 500% for a 25% fiber sample. It is also noted that the EBC/CF composites’ electric resistance underwent a dramatic increase in raising the strain. For example, the resistance change was around 13 times higher at 15% strain compared to 5% strain. The thermal conductivity tests showed that the addition of carbon fibers increases the thermal conductivity by 40%, from 0.19 to 0.27 Wm–1K–1.

Sign in / Sign up

Export Citation Format

Share Document