Utilization of Recycled Polyethylene in the Preparation of Stabilized, High Performance Modified Asphalt Binders

2009 ◽  
pp. 197-197-13 ◽  
Author(s):  
Z-Z Liang ◽  
RT Woodhams ◽  
ZN Wang ◽  
BF Harbinson
Keyword(s):  
High Performance ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Recycled Polyethylene

Recycled Polyethylene Modified Asphalt Binders and Mixtures: Performance Characteristics and Environmental Impact

2022 ◽  
pp. 036119812110657
Author(s):  
Ibrahim A. Abdalfattah ◽  
Walaa S. Mogawer ◽  
Kevin D. Stuart
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Dry Process ◽  
Modified Asphalt ◽  
Wet Process ◽  
Melted Snow ◽  
Recycled Polyethylene ◽  
Asphalt Paving

This study addresses the effects of recycled polyethylene (RPE) on the performances of both asphalt binders and asphalt mixtures. Whether using RPE in an asphalt mixture might leach harmful chemicals into rainwater or melted snow was also determined. Two processes, wet and dry, were used to formulate the RPE modified asphalt binders and mixtures. In the wet process, RPE was added to asphalt binder. In the dry process, it was added to heated aggregates. RPE from two sources and PG 64-22 virgin asphalt binders from two sources were used in this study. In conclusion, RPE improved the rutting resistance of the asphalt binders and asphalt mixtures. However, it had adverse effects on their resistance to intermediate-temperature and non-load associated cracking. The dry process could produce a mixture with a higher RPE dosage compared with the wet process using one virgin asphalt binder but not the other; thus, the virgin asphalt binder source was a significant factor for the dry process. Based on an embryotoxicity test, it was found that RPE can be used by the asphalt paving industry without creating any significant environmental risks.

scholarly journals Evaluation of High-Performance Asphalt Binders Modified with SBS, SIS, and GTR

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Hyun Hwan Kim ◽  
Mithil Mazumder ◽  
Moon-Sup Lee ◽  
Soon-Jae Lee
Keyword(s):  
High Performance ◽  
Asphalt Binder ◽  
Microstructural Analysis ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Rotational Viscometer ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Polymer Modified Asphalt ◽  
Styrene Butadiene

In this study, performance properties of polymer-modified asphalt (PMA) binders are evaluated depending on ground tire rubber (GTR) and styrene-isoprene-styrene (SIS). Styrene-butadiene-styrene- (SBS-) modified asphalt binder of PG 76-22 is used as a base binder to manufacture the rubberized PMA binder. The rubberized PMA binders are blended using SIS modifier. The binders were artificially short-term and long-term aged using rolling thin-film oven (RTFO) and pressure aging vessel (PAV) procedures. Superpave binder tests were conducted on the binders through rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometer (BBR). Furthermore, multiple stress creep recovery (MSCR) test and atomic force microscopy (AFM) microstructural analysis were performed. The results of this study indicated that (1) the viscosity properties seem to be highly dependent on GTR and SIS contents, (2) the addition of SIS is observed to have a significant effect on improving the rutting performances of rubberized PMA binders, (3) the cracking properties are considered to be improved significantly through SIS modification, and (4) in general, the rubberized PMA binders with SIS showed the best performance for rutting and cracking among all the binders used in this study.

scholarly journals Using Waste Plastics as Asphalt Modifier: A Review

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 110
Author(s):  
Fengchi Xu ◽  
Yao Zhao ◽  
Kangjian Li
Keyword(s):  
High Performance ◽  
Asphalt Mixtures ◽  
Environmental Benefits ◽  
Asphalt Binders ◽  
Utilization Rate ◽  
Waste Plastics ◽  
Waste Products ◽  
Waste Plastic ◽  
Modified Asphalt ◽  
Temperature Performance

The use of waste products in the production of asphalt binders and asphalt mixtures has become widespread due to economic and environmental benefits. In particular, the use of recycled waste plastic in asphalt binders and mixtures is gaining more attention. This review presents analyses and comparisons of various forms of waste plastic used in asphalt modification, and approaches to incorporating waste plastic into asphalt mixtures, both for single and composite modifications. It focuses on the properties of waste plastics, asphalt binders, and asphalt mixtures. Overall, the incorporation of plastic waste into asphalt mixtures can significantly improve high-temperature performance and has potential economic and environmental benefits. The performance of modified asphalt is highly dependent on multiple factors, such as waste sources, waste plastic dosages, blending conditions, and the pretreatment methods for waste plastic. There are different ways to apply waste plastics to blend into a mixture. In addition, this paper discusses the current challenges for waste plastic-modified asphalt, including the stability, low-temperature performance, modification mechanism, and laboratory problems of the blends. The use of chemical methods, such as additives and functionalization, is considered an effective way to achieve better interactions between waste plastics and the binder, as well as achieving a higher sufficiency utilization rate of waste plastics. Although both methods provide alternative options to produce waste plastic-modified asphalt with stability and high performance, the optimal proportion of materials used in the blends and the microcosmic mechanism of composite modified asphalt are not clear, and should be explored further.

scholarly journals Material Properties and Environmental Benefits of Hot-Mix Asphalt Mixes Including Local Crumb Rubber Obtained from Scrap Tires

Environments ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 47
Author(s):  
Lim Min Khiong ◽  
Md. Safiuddin ◽  
Mohammad Abdul Mannan ◽  
Resdiansyah
Keyword(s):  
Asphalt Binder ◽  
Crumb Rubber ◽  
Environmental Benefits ◽  
Asphalt Binders ◽  
Rubber Content ◽  
Scrap Tires ◽  
Asphalt Mixes ◽  
Temperature Resistance ◽  
Modified Asphalt ◽  
Marshall Stability

This paper presents the results of a laboratory-based experimental investigation on the properties of asphalt binder and hot-mix asphalt (HMA) mixes modified by locally available crumb rubber, which was used as a partial replacement of asphalt by weight. In this study, fine crumb rubber with a particle size in the range of 0.3–0.6 mm, obtained from scrap tires, was added to the asphalt binder through the wet process. Crumb rubber contents of 5%, 10%, 15%, and 19% by weight of asphalt were added to the virgin binder in order to prepare the modified asphalt binder samples, while the unmodified asphalt binder was used as the control sample. The crumb rubber modified binder samples were examined for measuring viscosity indirectly using the penetration test, and temperature resistance using the softening point test. Later, both the modified and unmodified asphalt binders were used to produce HMA mixes. Two categories of HMA mix commonly used in Malaysia—namely, AC 14 (dense-graded) and SMA 14 (gap-graded)—were produced using the modified asphalt binders containing 5%, 10%, 15%, and 19% crumb rubber. Two AC 14 and SMA 14 control mixes were also produced, incorporating the unmodified asphalt binder (0% crumb rubber). All of the AC 14 and SMA 14 asphalt mixes were examined in order to determine their volumetric properties, such as bulk density, voids in total mix (VTM), voids in mineral aggregate (VMA), and voids filled with asphalt (VFA). In addition, the Marshall stability, Marshall flow, and stiffness of all of the AC 14 and SMA 14 mixes were determined. Test results indicated that the modified asphalt binders possessed higher viscosity and temperature resistance than the unmodified asphalt binder. The viscosity and temperature resistance of the asphalt binders increased with the increase in their crumb rubber content. The increased crumb rubber content also led to improvements in the volumetric properties (bulk density, VTM, VMA, and VFA) of the AC 14 and SMA 14 mixes. In addition, the performance characteristics of the AC 14 and SMA 14 mixes—such as Marshall stability, Marshall flow, and stiffness—increased with the increase in crumb rubber content. However, the AC 14 mixes performed much better than the SMA 14 mixes. The overall research findings suggest that crumb rubber can be used to produce durable and sustainable HMA mixes, with manifold environmental benefits, for use in flexible pavements carrying the heavy traffic load of highways.

scholarly journals Mechanical Characteristics of Graphene Nanoplatelets-Modified Asphalt Mixes: A Comparison with Polymer- and Not-Modified Asphalt Mixes

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2434
Author(s):  
Laura Moretti ◽  
Nico Fabrizi ◽  
Nicola Fiore ◽  
Antonio D’Andrea
Keyword(s):  
Fatigue Resistance ◽  
Graphene Nanoplatelets ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Asphalt Mixes ◽  
Modified Asphalt ◽  
Bituminous Mixtures ◽  
Water Sensitivity ◽  
Polymer Modified Asphalt ◽  
Mechanical Performances

In recent years, nanotechnology has sparked an interest in nanomodification of bituminous materials to increase the viscosity of asphalt binders and improves the rutting and fatigue resistance of asphalt mixtures. This paper presents the experimental results of laboratory tests on bituminous mixtures laid on a 1052 m-long test section built in Rome, Italy. Four asphalt mixtures for wearing and binder layer were considered: two polymer modified asphalt concretes (the former modified with the additive Superplast and the latter modified with styrene–butadiene–styrene), a “hard” graphene nanoplatelets (GNPs) modified asphalt concrete and a not-modified mixture. The indirect tensile strength, water sensitivity, stiffness modulus, and fatigue resistance of the mixtures were tested and compared. A statistical analysis based on the results has shown that the mixtures with GNPs have higher mechanical performances than the others: GNP could significantly improve the tested mechanical performances; further studies will be carried out to investigate its effect on rutting and skid resistance.

Sign in / Sign up

Export Citation Format

Share Document