Short-Term Leaching Behavior of Co-60, Sr-85, and Cs-137 from Cemented Ion-Exchange Resin Waste Forms

2009 ◽  
pp. 204-204-13 ◽  
Author(s):  
J-O Lee ◽  
K-W Han ◽  
LP Buckley
Keyword(s):  
Ion Exchange ◽  
Exchange Resin ◽  
Ion Exchange Resin ◽  
Leaching Behavior ◽  
Short Term ◽  
Waste Forms

Development of pyrolytic monolithic carbon composites for the conditioning of spent ion exchange resins

2012 ◽  
Vol 1475 ◽  
Author(s):  
Pamela B. Ramos ◽  
Néstor O. Fuentes ◽  
Vittorio Luca
Keyword(s):  
Ion Exchange ◽  
Exchange Resin ◽  
Cation Exchange Resin ◽  
Processing Parameters ◽  
Ion Exchange Resin ◽  
Mathematical Functions ◽  
Waste Forms ◽  
Resin Beads ◽  
Temperature Ramp ◽  
Exchange Resins

ABSTRACTThe pyrolysis of ion exchange resin beads that are used for the purification of water in reactor primary- and secondary-cooling circuits can result in stable and leach resistant carbonaceous products. However, free flowing beads are less desirable waste forms for disposal in sub-surface or surface repositories than monolithic masses of low porosity. We have investigated the pyrolysis of polymeric resin – cation exchange resin composites to give mechanically robust and chemically durable monolithic carbonaceous waste forms that are suitable for repository disposition. Also investigated was the dependence of product properties on various processing parameters (temperature ramp and final temperature). As a first approach, epoxy resins were used for the preparation of monoliths since such resins cure at room temperature and result in a relatively high carbon yield. Carbonaceous monolithic products were prepared at 400, 500, 600, 700 and 800 °C using a temperature ramp of 2°C/min. The products were maintained at the chosen temperatures for a period of one hour. Mass losses, volume reduction, hardness and compressive strength were measured and mathematical functions are proposed to describe the measured values of these properties. The carbon monoliths were observed to be mechanically robust.

OPTIMIZATION OF DNA EXTRACTION METHODS FROM BIOLOGICAL MATERIALS OF HONEY BEES IN A DIFFERENT METAMOTPHOSIS PHASE

2016 ◽  
Vol 52 ◽  
pp. 171-176
Author(s):  
M. Palkina ◽  
O. Metlitska
Keyword(s):  
Ion Exchange ◽  
Dna Extraction ◽  
Honey Bees ◽  
Biological Material ◽  
Exchange Resin ◽  
Ion Exchange Resin ◽  
Extraction Methods ◽  
Chelex 100 ◽  
Drone Brood ◽  
Dna Extraction Methods

The aim of the research – adaptation, optimization and using of existing DNA extraction methods from bees’ biological material with the reagent «Chelex-100" under complex economic conditions of native laboratories, which will optimize labour costs and improve the economic performance of DNA extraction protocol. Materials and methods. In order to conduct the research the samples of honey bees’ biological material: queen pupae exuviae, larvae of drone brood, some adult bees’ bodies (head and thorax) were selected. Bowl and drone brood were obtained from the experimental bee hives of Institute of Apiculture nd. a. P. I. Prokopovich of NAAS. DNA extraction from biosamples of Apis mellifera ssp. was carried out using «Chelex-100®» ion exchange resin in different concentrations and combinations. Before setting tests for determination of quantitative and quality indexes, dilution of DNA samples of the probed object was conducted in ratio 1:40. The degree of contamination with protein and polysaccharide fractions (OD 260/230), quantitative content of DNA (OD 260/280) in the extracted tests were conducted using spectrophotometer of «Biospec – nano» at the terms of sample volume in 2 µl and length of optical way in 0,7 mm [7]. Verification of DNA samples from biological material of bees, isolated by «Chelex-100®», was conducted after cold keeping during 24 hours at 20°C using PСR with primaries to the fragment of gene of quantitative trait locus (QTL) Sting-2 of next structure [8]:  3' – CTC GAC GAG ACG ACC AAC TTG – 5’; 3' – AAC CAG AGT ATC GCG AGT GTT AC – 5’ Program of amplification: 94 °C – 5 minutes – 1 cycle; 94 °C – 1 minute, 57°C – 1 minute, 72 °C – 2 minutes – 30 cycles; elongation after 72°C during 2 minutes – 1 cycle. The division of obtained amplicons was conducted by gel electrophoresis at a low current – 7 µÀ, in 1,5 % agarose gel (Sigma ®) in TAE buffer [7]. The results. At the time of optimization of DNA isolation methods, according to existing methods of foreign experts, it was found optimal volume of ion exchange resin solution was in the proposed concentration: instead of 60 µl of solution used 120 µl of «Chelex-100®», time of incubation was also amended from 30 minutes to 180 minutes [9]. The use of the author's combination of method «Chelex-100®» with lysis enzymes, proteinase K and detergents (1M dithiothreitol), as time of incubation was also amended, which was reduced to 180 minutes instead of the proposed 12 hours [10]. Changes in quality characteristics of obtained DNA in samples after reduction in incubation time were not found. Conclusions. The most economical method of DNA isolation from bees’ biological material is 20% solution of «Chelex-100» ion exchange resin with the duration of the incubation period of 180 minutes. It should also be noted that the best results can be obtained from exuviae, selected immediately after the queen’s exit from bowl, that reduces the likelihood of DNA molecules destruction under the influence of nucleases activation, but not later than 12 hours from release using the technology of isolated obtain of queens.

Chromatography of chlorinated biphenyls on an ion-exchange resin

1977 ◽  
Vol 49 (6) ◽  
pp. 764-766 ◽  
Author(s):  
Toshihiko. Hanai ◽  
Harold F. Walton
Keyword(s):  
Ion Exchange ◽  
Exchange Resin ◽  
Ion Exchange Resin

scholarly journals An Amberlite IRA-400 Cl− ion-exchange resin modified with Prosopis juliflora seeds as an efficient Pb2+ adsorbent: adsorption, kinetics, thermodynamics, and computational modeling studies by density functional theory

RSC Advances ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 4478-4488
Author(s):  
Sivaprakasam Anbazhagan ◽  
Venugopal Thiruvengadam ◽  
Anandhakumar Sukeri
Keyword(s):  
Density Functional Theory ◽  
Ion Exchange ◽  
Computational Modeling ◽  
Removal Efficiency ◽  
Adsorption Kinetics ◽  
Density Functional ◽  
Exchange Resin ◽  
Ion Exchange Resin ◽  
Prosopis Juliflora ◽  
Functional Theory

We have demonstrated a high Pb2+ removal efficiency (73.45%) from wastewater using a Prosopis juliflora-seed-modified Amberlite IRA-400 Cl− ion-exchange resin (SMA resin).

Immobilization of inulinase on KU-2 ion-exchange resin matrix

2019 ◽  
Vol 138 ◽  
pp. 681-692 ◽  
Author(s):  
Marina G. Holyavka ◽  
Maxim S. Kondratyev ◽  
Anatoly N. Lukin ◽  
Boris L. Agapov ◽  
Valery G. Artyukhov
Keyword(s):  
Ion Exchange ◽  
Exchange Resin ◽  
Ion Exchange Resin ◽  
Resin Matrix
Sign in / Sign up

Export Citation Format

Share Document