Effect of Cross-Sectional Shapes of Polysulfide Sealant on Fatigue Resistance to Joint Movement

2009 ◽  
pp. 146-146-10
Author(s):  
K Tanaka ◽  
T Hirai ◽  
M Koike
Keyword(s):  
Fatigue Resistance ◽  
Joint Movement ◽  
Cross Sectional

scholarly journals Effect of Core Mass and Alloy on Cyclic Fatigue Resistance of Different Nickel-Titanium Endodontic Instruments in Matching Artificial Canals

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5734
Author(s):  
Sebastian Bürklein ◽  
Lennart Zupanc ◽  
David Donnermeyer ◽  
Karsten Tegtmeyer ◽  
Edgar Schäfer
Keyword(s):  
Fatigue Resistance ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
The Other ◽  
Design Parameters ◽  
Core Mass ◽  
Cross Sectional ◽  
Significance Level ◽  
Cross Sectional Design ◽  
The Impact

Instrument failure during root canal preparation is still a concern among endodontists. However, it remains unclear whether the use of more martensitic alloys or the cross-sectional design parameters (i.e., core mass) significantly improve fracture resistance. The aim of the study was to evaluate the impact of core mass and alloy on dynamic cyclic fatigue resistance of nickel-titanium endodontic instruments in matching artificial canals at body temperature. Two groups were tested. (A) taper 0.04: F360 (Komet, Lemgo, Germany), Twisted file (Sybron Endo, Glendora, CA, USA) (=TF), JIZAI (Mani, Tochigi, Japan) (=J_04) (all size #25) and the variable tapered TruNatomy (Dentsply, Ballaigues, Switzerland) (size #26) (=TN). (B) size #25; taper 0.06: (Mtwo (VDW, Munich, Germany), JIZAI (Mani) (=J_06), and variable tapered Hyflex EDM OneFile (Coltene Whaledent, Altstätten, Switzerland) (=HF). Time, number of cycles to fracture (NCF), and number and length of fractured fragments were recorded and statistically analysed using ANOVA Student-Newman-Keuls, Kruskal–Wallis or Chi-square test (significance level = 0.05). (A) TN showed the significantly shortest time until fracture, followed by TF, F360 and J_04 which also differed significantly, while NCF showed the following order: F360 < TN < TF < J_04 (p < 0.05). Only one J_04 but all instruments of the other groups fractured within the test-limit of 10 min. (B) Mtwo was significantly inferior concerning time until fracture and NCF, compared to J_06 and HF (p < 0.05), which did not differ significantly (p > 0.05). While all Mtwo instruments fractured, only four instruments failed in the other groups (p < 0.05). Within the limitations of this study, alloy and cross-sectional design (i.e., core mass) were critical factors regarding instrument failure, but none of these factors could be determined as a main parameter for increased or decreased time, and cycles to fracture. Rather, it seemed to be the interaction of multiple factors (e.g., longitudinal and cross-sectional design, alloy, and rotational speed) that was responsible for differences in the time and cycles to fracture. Nonetheless, all instruments had lifetimes that allow safe clinical use. However, the superiority or inferiority of an instrument with regard to cyclic fatigue based on laboratory results—even when identical trajectories are guaranteed—may be considered questionable, as the characteristics and design parameters of the instruments vary considerably, and the experimental setups lack additional clinical parameters and thus clinical relevance.

Diaphragm muscle fatigue resistance during postnatal development

1991 ◽  
Vol 71 (2) ◽  
pp. 458-464 ◽  
Author(s):  
G. C. Sieck ◽  
M. Fournier ◽  
C. E. Blanco
Keyword(s):  
Postnatal Development ◽  
Fatigue Resistance ◽  
Muscle Fibers ◽  
Diaphragm Muscle ◽  
Fatigue Properties ◽  
Type I ◽  
Type Ii ◽  
Cross Sectional ◽  
Type I Fibers ◽  
Type Ii Fibers

postnatal development. Both twitch contraction time and half-relaxation time decreased progressively with age. Correspondingly, the force-frequency curve was shifted to the left early in development compared with adults. The ratio of peak twitch force to maximum tetanic force decreased with age. Fatigue resistance of the diaphragm was highest at birth and then progressively decreased with age. At birth, most diaphragm muscle fibers stained darkly for myofibrillar adenosinetriphosphatase after alkaline preincubation and thus would be classified histochemically as type II. During subsequent postnatal development, the proportion of type I fibers (lightly stained for adenosinetriphosphatase) increased while the number of type II fibers declined. At birth, type I fibers were larger than type II fibers. The size of both fiber types increased with age, but the increase in cross-sectional area was greater for type II fibers. On the basis of fiber type proportions and mean cross-sectional areas, type I fibers contributed 15% of total muscle mass at birth and 25% in adults. Thus postnatal changes in diaphragm contractile and fatigue properties cannot be attributed to changes in the relative contribution of histochemically classified type I and II fibers. However, the possibility that these developmental changes in diaphragm contractile and fatigue properties correlated with the varying contractile protein composition of muscle fibers was discussed.

Physiological responses of rat plantaris motor units to overload induced by surgical removal of its synergists

1988 ◽  
Vol 60 (6) ◽  
pp. 2138-2151 ◽  
Author(s):  
A. E. Olha ◽  
B. J. Jasmin ◽  
R. N. Michel ◽  
P. F. Gardiner
Keyword(s):  
Motor Unit ◽  
Fatigue Resistance ◽  
Motor Units ◽  
High Threshold ◽  
Surgical Removal ◽  
Type I ◽  
Myofibrillar Atpase ◽  
Force Output ◽  
Cross Sectional ◽  
Single Motor Units

1. Rat plantaris muscles were subjected to chronic overload by the surgical removal of the soleus and most of the gastrocnemius muscles. Twelve to 16 wk later whole muscle and motor unit (ventral root dissection technique) contractile properties as well as histochemistry were determined. 2. Motor units were categorized as fast, fatigable (FF), fast, intermediate fatigue-resistant (FI), fast, fatigue-resistant (FR), and slow (S) based on contractile characteristics. Muscle fibers were identified as type I and type II according to myofibrillar ATPase staining. 3. Whole muscles demonstrated increases in wet weight, tetanic force, proportion of type I fibers, and mean cross-sectional areas of both type I and II fibers, as a result of chronic overload. 4. Tetanic tension increased by the same relative magnitude in all motor units whereas twitch tension remained unchanged. A significant change in the proportions of the motor unit types occurred in overloaded muscles, such that the latter contained higher proportions of FF and S units, and lower proportions of FI and FR units, than normal muscles. 5. The fatigue profile of a composite constructed from a summation of motor unit responses revealed that the overloaded plantaris displayed fatigue resistance similar to that of the normal plantaris for a given absolute force output. 6. Glycogen-depleted fibers of hypertrophied single motor units demonstrated uniform myofibrillar ATPase and SDH staining characteristics suggesting that metabolic adaptations among fibers of the same unit were similar after 12-16 wk of overload. 7. The finding that overload caused a uniform increase in the tetanic strength of all motor units, whereas alterations in fatigue resistance varied in degree and direction among unit types, demonstrate that these two properties are not controlled in parallel in this model. The smallest units maintain or even increase their fatigue resistance during the hypertrophic process, whereas high threshold units actually decrease in fatigue resistance.

scholarly journals Comparative Kinematic and Electromyographic Assessment of Clinician- and Device-Assisted Sit-to-Stand Transfers in Patients With Stroke

2013 ◽  
Vol 93 (10) ◽  
pp. 1331-1341 ◽  
Author(s):  
Judith M. Burnfield ◽  
Bernadette McCrory ◽  
Yu Shu ◽  
Thad W. Buster ◽  
Adam P. Taylor ◽  
...  
Keyword(s):  
Repeated Measures ◽  
Muscle Activation ◽  
Joint Movement ◽  
Trunk Flexion ◽  
Cross Sectional ◽  
Ankle Motion ◽  
Repeated Measures Design ◽  
Sit To Stand ◽  
Lower Extremity Muscle ◽  
Combat Injuries

Background Workplace injuries from patient handling are prevalent. With the adoption of no-lift policies, sit-to-stand transfer devices have emerged as one tool to combat injuries. However, the therapeutic value associated with sit-to-stand transfers with the use of an assistive apparatus cannot be determined due to a lack of evidence-based data. Objective The aim of this study was to compare clinician-assisted, device-assisted, and the combination of clinician- and device-assisted sit-to-stand transfers in individuals who recently had a stroke. Design This cross-sectional, controlled laboratory study used a repeated-measures design. Methods The duration, joint kinematics, and muscle activity of 4 sit-to-stand transfer conditions were compared for 10 patients with stroke. Each patient performed 4 randomized sit-to-stand transfer conditions: clinician-assisted, device-assisted with no patient effort, device-assisted with the patient’s best effort, and device- and clinician-assisted. Results Device-assisted transfers took nearly twice as long as clinician-assisted transfers. Hip and knee joint movement patterns were similar across all conditions. Forward trunk flexion was lacking and ankle motion was restrained during device-assisted transfers. Encouragement and guidance from the clinician during device-assisted transfers led to increased lower extremity muscle activation levels. Limitations One lifting device and one clinician were evaluated. Clinician effort could not be controlled. Conclusions Lack of forward trunk flexion and restrained ankle movement during device-assisted transfers may dissuade clinicians from selecting this device for use as a dedicated rehabilitation tool. However, with clinician encouragement, muscle activation increased, which suggests that it is possible to safely practice transfers while challenging key leg muscles essential for standing. Future sit-to-stand devices should promote safety for the patient and clinician and encourage a movement pattern that more closely mimics normal sit-to-stand biomechanics.

Effects of starvation and refeeding on adult male rat diaphragm contractility, fatigue, and fiber types

1993 ◽  
Vol 74 (2) ◽  
pp. 742-749 ◽  
Author(s):  
D. J. Prezant ◽  
D. E. Valentine ◽  
H. H. Kim ◽  
E. I. Gentry
Keyword(s):  
Fatigue Resistance ◽  
Cross Sectional Area ◽  
Male Rats ◽  
Male Rat ◽  
Type I ◽  
Fiber Types ◽  
Type Ii ◽  
Sectional Area ◽  
Cross Sectional ◽  
Type Ii Fibers

The effects of 4.5 days of acute starvation, either alone or followed by refeeding (ad libitum), on diaphragm contractility, fatigue, and fiber types were studied in male rats. Contractility and fatigue resistance indexes were measured in an in vitro costal diaphragm strip preparation with direct stimulation at 37 degrees C. Compared with controls, starvation produced a 28 +/- 1% (P < 0.001) reduction in body weight and an 18 +/- 4% (P < 0.001) reduction in costal diaphragm weight. Twitch and tetanic tensions (normalized for weight or cross-sectional area) were not reduced by starvation. Starvation produced significant increases in fatigue resistance indexes after a 5-Hz stimulation paradigm but not after a 100-Hz paradigm, supporting the hypothesis that fatigue resistance is dependent on the energy demand of a given paradigm. The proportions of type I and type II fibers were similar between diaphragms of starved and control rats, but the cross-sectional area of type II fibers decreased significantly by 18 +/- 7% (P < 0.01). Thus, despite the significant decrease in diaphragm weight after starvation, contractility was preserved and fatigue resistance was increased (low-output paradigm). This is consistent with the decrease in type II fiber area. Refeeding restored all parameters so that there were no longer significant differences in body or diaphragm weight, contractility, fatigue, or fiber types.

scholarly journals A comparative investigation between ProTaper Next, Hyflex CM, 2Shape, and TF-Adaptive file systems concerning cyclic fatigue resistance

2021 ◽  
Vol 15 (3) ◽  
pp. 172-177
Author(s):  
Sibel Koçak ◽  
Faruk Furkan Şahin ◽  
Olcay Özdemir ◽  
Mustafa Murat Koçak ◽  
Baran Can Sağlam
Keyword(s):  
Fatigue Resistance ◽  
Statistical Significance ◽  
File Systems ◽  
Cyclic Fatigue ◽  
Comparative Investigation ◽  
Cross Sectional ◽  
Kolmogorov Smirnov ◽  
Sectional Surface ◽  
Number Of Cycles ◽  
Alloy Properties

Background. This study aimed to compare the cyclic fatigue resistance of ProTaper Next, Hyflex CM, 2Shape, and TF-Adaptive nickel-titanium endodontic file systems with various alloy properties and production methods and investigate the fractured cross-sectional surface of files due to cyclic fatigue by scanning electron microscopy (SEM). Methods. A total of 120 instruments were used (n=30). For standardization, #25/.06 apical diameter and taper angle were selected for each file system. The experiment of files was subjected to a static cyclic fatigue model. The time for files’ failure was recorded with a digital chronometer and multiplied by the rotation speed to calculate the number of cycles. Kolmogorov-Smirnov, one-way ANOVA, and post hoc Bonferroni analysis were used for statistical analysis. Statistical significance was set at P<0.05. Results. The number of cycles for the failure of files was compared between the groups, and significant differences were found (P<0.05). The number of cycles for instrument failure was recorded from the highest to the lowest as follows: Hyflex CM, TF-Adaptive, ProTaper Next, and 2Shape. Conclusion. The files were fractured at different average numbers of cycles in an artificial canal in all the groups. The Hyflex CM demonstrated better cyclic fatigue resistance than TF Adaptive, ProTaper Next, and 2Shape file systems. Factors such as production patterns, alloy properties, and the phase in which the files were produced might affect the lifespan of file systems.

Sign in / Sign up

Export Citation Format

Share Document