Physical Characterization of Water Treatment Plant Residual and Top Soil Mixtures

2009 ◽  
pp. 3-3-13 ◽  
Author(s):  
D Raghu ◽  
H-N Hsieh ◽  
SC Basim ◽  
M Morgan
Keyword(s):  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Physical Characterization ◽  
Top Soil ◽  
Soil Mixtures

Detailed experimental and numerical characterization of turbulent flow in components of a water treatment plant

2019 ◽  
Vol 80 (11) ◽  
pp. 2117-2130
Author(s):  
Ivan Matías Ragessi ◽  
Carlos Marcelo García ◽  
Santiago Márquez Damián ◽  
Cecilia Pozzi Piacenza ◽  
Mariano Ignacio Cantero
Keyword(s):  
Water Treatment ◽  
Turbulent Flow ◽  
Treatment Plant ◽  
Acoustic Doppler Current Profiler ◽  
Water Treatment Plant ◽  
Mean Flow ◽  
Cross Sectional ◽  
Flow Recirculation ◽  
Hydraulic Design

Abstract This paper presents a detailed characterization of turbulence in the incoming flow to the clarification component of a water treatment plant, ‘Los Molinos’ (Córdoba, Argentina). The main problems were related to the presence of turbulent flow patterns throughout the treatment, affecting the proper development of the physical processes required for water clarification. Namely: (a) a poor hydraulic design that could produce a non-homogeneous spatial distribution of the flow, recirculation zones and flow stagnation, and a non-uniform discharge distribution among the sedimentation units as a result of different cross-sectional dimensions of the transverse-channel, and (b) high turbulence intensity that affect the flocs' size as well as the efficiency of the settling tanks and filters. Firstly, a detailed in-situ experimental characterization of the turbulent flow was undertaken. An acoustic Doppler velocimeter (ADV) was used to characterize the flow turbulence, whereas for discharge measurements and mean flow velocity field an acoustic Doppler current profiler (ADCP) was employed. Secondly, a numerical model, based on the Reynolds-averaged Navier–Stokes (RANS) equations and the - turbulence closure model, was validated with the experimental data. Finally, based on the results, a diagnosis and recommendations were made for the optimization of the hydraulic design of the water treatment plant.

scholarly journals Characterization of Alum Sludge from Surabaya Water Treatment Plant, Indonesia

2019 ◽  
Vol 20 (5) ◽  
pp. 7-13 ◽  
Author(s):  
Rizkiy Barakwan ◽  
Yulinah Trihadiningrum ◽  
Arseto Bagastyo
Keyword(s):  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Alum Sludge

Characterization of Raw and Thermally Treated Alum Sludge

2016 ◽  
Vol 701 ◽  
pp. 138-142 ◽  
Author(s):  
Mohamat Yusuff Soleha ◽  
Keat Khim Ong ◽  
Wan Yunus Wan Md Zin ◽  
Ahmad Mansor ◽  
Fitrianto Anwar ◽  
...  
Keyword(s):  
Water Treatment ◽  
Heating Temperature ◽  
Low Cost ◽  
Waste Product ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Alum Sludge ◽  
Thermally Treated

Use of alum as a coagulant in drinking water treatment process generates an alum sludge as a waste product. Since the amount of this sludge is huge, it is crucial for a water work management to properly handle and dispose of this sludge. Reuse of this alum sludge as a solid adsorbent is one of the proposed applications for this material but modification and characterization are needed to alter and identify its properties so that optimum benefits are obtained. This paper reports characterization of raw and thermally treated alum sludge. The raw alum sludge was collected from a local water treatment plant and heated at 300 °C and 800 °C for 7 hours using a furnace before characterization using scanning electron microscopy energy (SEM), thermogravimetric (TGA), X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET). The results showed that surface morphology, thermal properties, microstructure, surface area and porosity of the sludge were affected by heating temperature whereby increase the heating temperature resulted in improved thermal stability of the sludge. The results also revealed that both raw and thermally treated alum sludge were mesoporous materials and mainly compose of quartz and kaolinite. It can be said that the sludge could be a good candidate as low cost adsorbent.

Sign in / Sign up

Export Citation Format

Share Document