Influence of Transition Elements Fe, Cr, and V on Long-Time Corrosion in PWRs

2008 ◽  
pp. 609-609-14 ◽  
Author(s):  
Y Broy ◽  
F Garzarolli ◽  
A Seibold ◽  
LF Van Swam
Keyword(s):  
Transition Elements ◽  
Long Time

Study of charge transfer in FeTi

1983 ◽  
Vol 41 ◽  
pp. 296-297
Author(s):  
J. Taft∅
Keyword(s):  
Charge Transfer ◽  
Charge Distribution ◽  
Electron Scattering ◽  
Periodic System ◽  
Electron Distribution ◽  
Scattering Amplitude ◽  
Transition Elements ◽  
Hartree Fock ◽  
Cscl Structure ◽  
The Right

It is well known that for reflections corresponding to large interplanar spacings (i.e., sin θ/λ small), the electron scattering amplitude, f, is sensitive to the ionicity and to the charge distribution around the atoms. We have used this in order to obtain information about the charge distribution in FeTi, which is a candidate for storage of hydrogen. Our goal is to study the changes in electron distribution in the presence of hydrogen, and also the ionicity of hydrogen in metals, but so far our study has been limited to pure FeTi. FeTi has the CsCl structure and thus Fe and Ti scatter with a phase difference of π into the 100-ref lections. Because Fe (Z = 26) is higher in the periodic system than Ti (Z = 22), an immediate “guess” would be that Fe has a larger scattering amplitude than Ti. However, relativistic Hartree-Fock calculations show that the opposite is the case for the 100-reflection. An explanation for this may be sought in the stronger localization of the d-electrons of the first row transition elements when moving to the right in the periodic table. The tabulated difference between fTi (100) and ffe (100) is small, however, and based on the values of the scattering amplitude for isolated atoms, the kinematical intensity of the 100-reflection is only 5.10-4 of the intensity of the 200-reflection.

200kv superconducting cryo electron microscope

1987 ◽  
Vol 45 ◽  
pp. 642-643
Author(s):  
M. Iwatsuki ◽  
Y. Kokubo ◽  
Y. Harada ◽  
J. Lehman
Keyword(s):  
Electron Microscope ◽  
Structure Analysis ◽  
Organic Materials ◽  
Strong Interactions ◽  
Specimen Preparation ◽  
Great Effort ◽  
Electron Microscopic ◽  
Crystal Fields ◽  
Special Skill ◽  
Long Time

In recent years, the electron microscope has been significantly improved in resolution and we can obtain routinely atomic-level high resolution images without any special skill. With this improvement, the structure analysis of organic materials has become one of the interesting targets in the biological and polymer crystal fields.Up to now, X-ray structure analysis has been mainly used for such materials. With this method, however, great effort and a long time are required for specimen preparation because of the need for larger crystals. This method can analyze average crystal structure but is insufficient for interpreting it on the atomic or molecular level. The electron microscopic method for organic materials has not only the advantage of specimen preparation but also the capability of providing various information from extremely small specimen regions, using strong interactions between electrons and the substance. On the other hand, however, this strong interaction has a big disadvantage in high radiation damage.

A Stationary Solution of High-Energy Electron Reflection (HEER) for An Arbitrary Surface

1990 ◽  
Vol 48 (2) ◽  
pp. 374-375
Author(s):  
YIQUN MA
Keyword(s):  
Stationary Solution ◽  
High Energy ◽  
Bloch Wave ◽  
Dynamical Theory ◽  
High Energy Electron ◽  
Bulk Materials ◽  
Periodic Surface ◽  
Electron Transmission ◽  
Electron Reflection ◽  
Long Time

For a long time, the development of dynamical theory for HEER has been stagnated for several reasons. Although the Bloch wave method is powerful for the understanding of physical insights of electron diffraction, particularly electron transmission diffraction, it is not readily available for the simulation of various surface imperfection in electron reflection diffraction since it is basically a method for bulk materials and perfect surface. When the multislice method due to Cowley & Moodie is used for electron reflection, the “edge effects” stand firmly in the way of reaching a stationary solution for HEER. The multislice method due to Maksym & Beeby is valid only for an 2-D periodic surface.Now, a method for solving stationary solution of HEER for an arbitrary surface is available, which is called the Edge Patching method in Multislice-Only mode (the EPMO method). The analytical basis for this method can be attributed to two important characters of HEER: 1) 2-D dependence of the wave fields and 2) the Picard iteractionlike character of multislice calculation due to Cowley and Moodie in the Bragg case.

Direct imaging of charge transfer

1996 ◽  
Vol 54 ◽  
pp. 680-681
Author(s):  
Yimei Zhu ◽  
J. Tafto
Keyword(s):  
Charge Transfer ◽  
Electron Diffraction ◽  
Scattering Amplitude ◽  
High Temperature Superconductors ◽  
Charge Carriers ◽  
Image Charge ◽  
Net Charge ◽  
Long Time ◽  
Electron Holes ◽  
First Time

The electron holes confined to the CuO2-plane are the charge carriers in high-temperature superconductors, and thus, the distribution of charge plays a key role in determining their superconducting properties. While it has been known for a long time that in principle, electron diffraction at low angles is very sensitive to charge transfer, we, for the first time, show that under a proper TEM imaging condition, it is possible to directly image charge in crystals with a large unit cell. We apply this new way of studying charge distribution to the technologically important Bi2Sr2Ca1Cu2O8+δ superconductors.Charged particles interact with the electrostatic potential, and thus, for small scattering angles, the incident particle sees a nuclei that is screened by the electron cloud. Hence, the scattering amplitude mainly is determined by the net charge of the ion. Comparing with the high Z neutral Bi atom, we note that the scattering amplitude of the hole or an electron is larger at small scattering angles. This is in stark contrast to the displacements which contribute negligibly to the electron diffraction pattern at small angles because of the short g-vectors.

Microstructural characterization of plasma-processed Ti-Al metal matrix composites

1989 ◽  
Vol 47 ◽  
pp. 552-553
Author(s):  
M. G. Burke ◽  
M. N. Gungor ◽  
M. A. Burke
Keyword(s):  
High Temperature ◽  
Titanium Aluminide ◽  
Plasma Processing ◽  
Microstructural Characterization ◽  
High Temperature Strength ◽  
Matrix Composites ◽  
Intermetallic Matrix ◽  
Long Time ◽  
Strength And Stiffness ◽  
Intermetallic Matrix Composites

Intermetallic matrix composites are candidates for ultrahigh temperature service when light weight and high temperature strength and stiffness are required. Recent efforts to produce intermetallic matrix composites have focused on the titanium aluminide (TiAl) system with various ceramic reinforcements. In order to optimize the composition and processing of these composites it is necessary to evaluate the range of structures that can be produced in these materials and to identify the characteristics of the optimum structures. Normally, TiAl materials are difficult to process and, thus, examination of a suitable range of structures would not be feasible. However, plasma processing offers a novel method for producing composites from difficult to process component materials. By melting one or more of the component materials in a plasma and controlling deposition onto a cooled substrate, a range of structures can be produced and the method is highly suited to examining experimental composite systems. Moreover, because plasma processing involves rapid melting and very rapid cooling can be induced in the deposited composite, it is expected that processing method can avoid some of the problems, such as interfacial degradation, that are associated with the relatively long time, high temperature exposures that are induced by conventional processing methods.

Gum arabic helps prepare better lacey polymer films for specimen support in electron microscopy

1993 ◽  
Vol 51 ◽  
pp. 240-241
Author(s):  
Shailesh R. Sheth ◽  
Jayesh R. Bellare
Keyword(s):  
Electron Microscopy ◽  
Polymer Films ◽  
Gum Arabic ◽  
Complete Removal ◽  
Ammonium Bromide ◽  
Release Agent ◽  
Astigmatism Correction ◽  
Long Time ◽  
Micro Holes ◽  
Cetyl Trimethyl Ammonium

Specimen support and astigmatism correction in Electron Microscopy are at least two areas in which lacey polymer films find extensive applications. Although their preparation has been studied for a very long time, present techniques still suffer from incomplete release of the film from its substrate and presence of a large number of pseudo holes in the film. Our method ensures complete removal of the entire lacey film from the substrate and fewer pseudo holes by pre-treating the substrate with Gum Arabic, which acts as a film release agent.The method is based on the classical condensation technique for preparing lacey films which is essentially deposition of minute water or ice droplets on the substrate and laying the polymer film over it, so that micro holes are formed corresponding to the droplets. A microscope glass slide (the substrate) is immersed in 2.0% (w/v) aq. CTAB (cetyl trimethyl ammonium bromide)-0.22% (w/v) aq.

On-line image readout in CTEM

1994 ◽  
Vol 52 ◽  
pp. 400-401
Author(s):  
K.-H. Herrmann ◽  
W. D. Rau ◽  
R. Sikeler
Keyword(s):  
Primary Electron ◽  
Digital Information ◽  
Electron Hole ◽  
Detection Technology ◽  
Long Time ◽  
On Line ◽  
Electron Image ◽  
Optical Transfer ◽  
Detection Quantum Efficiency ◽  
Technical Solutions

Quantitative recording of electron patterns and their rapid conversion into digital information is an outstanding goal which the photoplate fails to solve satisfactorily. For a long time, LLL-TV cameras have been used for EM adjustment but due to their inferior pixel number they were never a real alternative to the photoplate. This situation has changed with the availability of scientific grade slow-scan charged coupled devices (CCD) with pixel numbers exceeding 106, photometric accuracy and, by Peltier cooling, both excellent storage and noise figures previously inaccessible in image detection technology. Again the electron image is converted into a photon image fed to the CCD by some light optical transfer link. Subsequently, some technical solutions are discussed using the detection quantum efficiency (DQE), resolution, pixel number and exposure range as figures of merit.A key quantity is the number of electron-hole pairs released in the CCD sensor by a single primary electron (PE) which can be estimated from the energy deposit ΔE in the scintillator,

New polarized-light microscope for fast and orientation independent measurement of birefringent fine structure

1993 ◽  
Vol 51 ◽  
pp. 82-83
Author(s):  
Rudolf Oldenbourg
Keyword(s):  
Light Microscope ◽  
Polarized Light ◽  
Video Camera ◽  
Limited Range ◽  
Image Point ◽  
Computer Assisted ◽  
Optical Modulators ◽  
Anisotropic Structures ◽  
Long Time ◽  
Computer Assisted Image

The polarized light microscope has the unique potential to measure submicroscopic molecular arrangements dynamically and non-destructively in living cells and other specimens. With the traditional pol-scope, however, single images display only those anisotropic structures that have a limited range of orientations with respect to the polarization axes of the microscope. Furthermore, rapid measurements are restricted to a single image point or single area that exhibits uniform birefringence or other form of optical anisotropy, while measurements comparing several image points take an inordinately long time.We are developing a new kind of polarized light microscope which combines speed and high resolution in its measurement of the specimen anisotropy, irrespective of its orientation. The design of the new pol-scope is based on the traditional polarized light microscope with two essential modifications: circular polarizers replace linear polarizers and two electro-optical modulators replace the traditional compensator. A video camera and computer assisted image analysis provide measurements of specimen anisotropy in rapid succession for all points of the image comprising the field of view.

Microspectroscopy Using a Solid Immersion Lens

2001 ◽  
Vol 7 (S2) ◽  
pp. 148-149
Author(s):  
C.D. Poweleit ◽  
J Menéndez
Keyword(s):  
Spatial Resolution ◽  
Focal Plane ◽  
Numerical Aperture ◽  
Normal Incidence ◽  
Spot Size ◽  
Index Of Refraction ◽  
Objective Lens ◽  
Improvement Factor ◽  
Oil Immersion ◽  
Long Time

Oil immersion lenses have been used in optical microscopy for a long time. The light’s wavelength is decreased by the oil’s index of refraction n and this reduces the minimum spot size. Additionally, the oil medium allows a larger collection angle, thereby increasing the numerical aperture. The SIL is based on the same principle, but offers more flexibility because the higher index material is solid. in particular, SILs can be deployed in cryogenic environments. Using a hemispherical glass the spatial resolution is improved by a factor n with respect to the resolution obtained with the microscope’s objective lens alone. The improvement factor is equal to n2 for truncated spheres.As shown in Fig. 1, the hemisphere SIL is in contact with the sample and does not affect the position of the focal plane. The focused rays from the objective strike the lens at normal incidence, so that no refraction takes place.

Sign in / Sign up

Export Citation Format

Share Document