Renovation of Existing Masonry Buildings to Residential Lofts

2009 ◽  
pp. 140-140-8
Author(s):  
BS Kaskel ◽  
EA Gems ◽  
K DeMuth
Keyword(s):  
Masonry Buildings

scholarly journals Fragility curves for Italian URM buildings based on a hybrid method

2021 ◽  
Author(s):  
A. Sandoli ◽  
G. P. Lignola ◽  
B. Calderoni ◽  
A. Prota
Keyword(s):  
Seismic Vulnerability ◽  
Fragility Curves ◽  
Limit State ◽  
Ultimate Limit State ◽  
Masonry Building ◽  
Masonry Buildings ◽  
Seismic Behaviour ◽  
Building Stock ◽  
Ground Acceleration ◽  
Damage Scenario

AbstractA hybrid seismic fragility model for territorial-scale seismic vulnerability assessment of masonry buildings is developed and presented in this paper. The method combines expert-judgment and mechanical approaches to derive typological fragility curves for Italian residential masonry building stock. The first classifies Italian masonry buildings in five different typological classes as function of age of construction, structural typology, and seismic behaviour and damaging of buildings observed following the most severe earthquakes occurred in Italy. The second, based on numerical analyses results conducted on building prototypes, provides all the parameters necessary for developing fragility functions. Peak-Ground Acceleration (PGA) at Ultimate Limit State attainable by each building’s class has been chosen as an Intensity Measure to represent fragility curves: three types of curve have been developed, each referred to mean, maximum and minimum value of PGAs defined for each building class. To represent the expected damage scenario for increasing earthquake intensities, a correlation between PGAs and Mercalli-Cancani-Sieber macroseismic intensity scale has been used and the corresponding fragility curves developed. Results show that the proposed building’s classes are representative of the Italian masonry building stock and that fragility curves are effective for predicting both seismic vulnerability and expected damage scenarios for seismic-prone areas. Finally, the fragility curves have been compared with empirical curves obtained through a macroseismic approach on Italian masonry buildings available in literature, underlining the differences between the methods.

Investigation and Analysis on Seismic Damage of Masonry Buildings Subjected to Wenchuan Ms=8.0 Earthquake

2010 ◽  
Vol 452-453 ◽  
pp. 105-108 ◽  
Author(s):  
Hong Fu Chen ◽  
Bai Tao Sun
Keyword(s):  
Seismic Design ◽  
Concrete Slab ◽  
Seismic Damage ◽  
Impact Factors ◽  
Economic Losses ◽  
Masonry Building ◽  
Masonry Buildings ◽  
Seismic Design Code ◽  
The Impact ◽  
Wenchuan Ms 8.0 Earthquake

During Wenchuan Ms 8.0 earthquake, masonry buildings have suffered severely damaged and collapsed, causing heavy casualties and huge economic losses. In this paper, based on seismic site survey data, some new phenomena and characteristics of earthquake damage in comparison with the 1976 Tangshan earthquake, such as seismic damage of large space buildings, inclined or “X” shaped crack in wall between windows or spandrel wall, stair damage, falling of precast reinforced concrete slab and horizontal crack at the bottom of structure, are discussed in detail. Then, the impact factors of seismic capacity of masonry building in Wenchuan earthquake, including construction age, seismic fortification, bay size, floor (roof) form, layer number, thickness of bearing wall are analyzed, respectively; Finally, some recommendations on seismic design and reconstruction of masonry structure by the seismic design code are proposed.

Sign in / Sign up

Export Citation Format

Share Document