Bearing Forces as a Function of Mechanical Stiffness and Vibration Isolation in a Fourbar Linkage

2009 ◽  
pp. 21-21-11
Author(s):  
RL Norton ◽  
HK Ault ◽  
J Wiley ◽  
T Parks ◽  
R Calawa ◽  
...  
Keyword(s):  
Vibration Isolation ◽  
Mechanical Stiffness

Comparison of TEM and STM observations of small silver clusters on different carbon supports

1990 ◽  
Vol 48 (4) ◽  
pp. 264-265
Author(s):  
Bernd Tesche ◽  
Tobias Schilling
Keyword(s):  
Vibration Isolation ◽  
Pyrolytic Graphite ◽  
Carbon Film ◽  
Silver Clusters ◽  
Carbon Supports ◽  
Stacking Order ◽  
System P ◽  
High Resolution Tem ◽  
High Degree ◽  
Degree Of Order

The objective of our work is to determine:a) whether both of the imaging methods (TEM, STM) yield comparable data andb) which method is better suited for a reliable structure analysis of microclusters smaller than 1.5 nm, where a deviation of the bulk structure is expected.The silver was evaporated in a bell-jar system (p 10−5 pa) and deposited onto a 6 nm thick amorphous carbon film and a freshly cleaved highly oriented pyrolytic graphite (HOPG).The average deposited Ag thickness is 0.1 nm, controlled by a quartz crystal microbalance at a deposition rate of 0.02 nm/sec. The high resolution TEM investigations (100 kV) were executed by a hollow-cone illumination (HCI). For the STM investigations a commercial STM was used. With special vibration isolation we achieved a resolution of 0.06 nm (inserted diffraction image in Fig. 1c). The carbon film shows the remarkable reduction in noise by using HCI (Fig. 1a). The HOPG substrate (Fig. 1b), cleaved in sheets thinner than 30 nm for the TEM investigations, shows the typical arrangement of a nearly perfect stacking order and varying degrees of rotational disorder (i.e. artificial single crystals). The STM image (Fig. 1c) demonstrates the high degree of order in HOPG with atomic resolution.

Vibration isolation of power tool operators

1983 ◽  
Author(s):  
C. W. Suggs ◽  
C. F. Abrams
Keyword(s):  
Vibration Isolation

An hourglass-type electromagnetic isolator with negative resistance electromagnetic shunt circuit

2020 ◽  
Vol 64 (1-4) ◽  
pp. 549-556
Author(s):  
Yajun Luo ◽  
Linwei Ji ◽  
Yahong Zhang ◽  
Minglong Xu ◽  
Xinong Zhang
Keyword(s):  
Vibration Isolation ◽  
Electromechanical Coupling ◽  
Coupling Effect ◽  
Negative Resistance ◽  
Isolation System ◽  
Amplitude Vibration ◽  
Vibration Responses ◽  
The Stability ◽  
Isolation Performance ◽  
Shunt Circuit

The present work proposed an hourglass-type electromagnetic isolator with negative resistance (NR) shunt circuit to achieve the effective suppression of the micro-amplitude vibration response in various advanced instruments and equipment. By innovatively design of combining the displacement amplifier and the NR electromagnetic shunt circuit, the current new type of vibration isolator not only can effectively solve the problem of micro-amplitude vibration control, but also has significant electromechanical coupling effect, to obtain excellent vibration isolation performance. The design of the isolator and motion relationship is presented firstly. The electromechanical coupling dynamic model of the isolator is also given. Moreover, the optimal design of the NR electromagnetic shunt circuit and the stability analysis of the vibration isolation system are carried out. Finally, the simulation results about the transfer function and vibration responses demonstrated that the isolator has a significant isolation performance.

Performance testing for an active/passive vibration isolation and steering system

1996 ◽  
Author(s):  
Jeanne Sullivan ◽  
James Gooding ◽  
Michelle Idle ◽  
Alok Das ◽  
Terance Hoffman ◽  
...  
Keyword(s):  
Vibration Isolation ◽  
Performance Testing ◽  
Steering System ◽  
Passive Vibration Isolation

Whole-Spacecraft Vibration Isolation on Small Launch Vehicles

2000 ◽  
Author(s):  
Paul S. Wilke ◽  
Conor D. Johnson ◽  
Patrick J. Grosserode ◽  
Dino Sciulli
Keyword(s):  
Vibration Isolation ◽  
Launch Vehicles

scholarly journals A Variable Parameter Ambient Vibration Control Method Based on Quasi-Zero Stiffness in Robotic Drilling Systems

Machines ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 67
Author(s):  
Laixi Zhang ◽  
Chenming Zhao ◽  
Feng Qian ◽  
Jaspreet Singh Dhupia ◽  
Mingliang Wu
Keyword(s):  
Vibration Control ◽  
Vibration Isolation ◽  
Control Method ◽  
Control Strategies ◽  
Equations Of Motion ◽  
Variable Parameter ◽  
Harmonic Balance Method ◽  
Variable Stiffness ◽  
Ambient Vibration ◽  
Robotic Drilling

Vibrations in the aircraft assembly building will affect the precision of the robotic drilling system. A variable stiffness and damping semiactive vibration control mechanism with quasi-zero stiffness characteristics is developed. The quasi-zero stiffness of the mechanism is realized by the parallel connection of four vertically arranged bearing springs and two symmetrical horizontally arranged negative stiffness elements. Firstly, the quasi-zero stiffness parameters of the mechanism at the static equilibrium position are obtained through analysis. Secondly, the harmonic balance method is used to deal with the differential equations of motion. The effects of every parameter on the displacement transmissibility are analyzed, and the variable parameter control strategies are proposed. Finally, the system responses of the passive and semiactive vibration isolation mechanisms to the segmental variable frequency excitations are compared through virtual prototype experiments. The results show that the frequency range of vibration isolation is widened, and the stability of the vibration control system is effectively improved without resonance through the semiactive vibration control method. It is of innovative significance for ambient vibration control in robotic drilling systems.

Sign in / Sign up

Export Citation Format

Share Document