Thermal Conductivity Dependence of Mgo Thermal Insulation on Porosity in Temperature Range 500 – 2000 K

2009 ◽  
pp. 292-292-15 ◽  
Author(s):  
E Litovsky ◽  
T Litovsky ◽  
M Shapiro ◽  
A Shavit
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Temperature Range

scholarly journals Fique as a Sustainable Material and Thermal Insulation for Buildings: Study of Its Decomposition and Thermal Conductivity

2021 ◽  
Vol 13 (13) ◽  
pp. 7484
Author(s):  
Gabriel Fernando García Sánchez ◽  
Rolando Enrique Guzmán López ◽  
Roberto Alonso Gonzalez-Lezcano
Keyword(s):  
Thermal Conductivity ◽  
Thermal Decomposition ◽  
Thermal Insulation ◽  
Model Fitting ◽  
Good Alternative ◽  
Negative Effects ◽  
Thermal Insulator ◽  
Fitting Method ◽  
Thermogravimetric Data ◽  
Reduce Energy Consumption

Buildings consume a large amount of energy during all stages of their life cycle. One of the most efficient ways to reduce their consumption is to use thermal insulation materials; however, these generally have negative effects on the environment and human health. Bio-insulations are presented as a good alternative solution to this problem, thus motivating the study of the properties of natural or recycled materials that could reduce energy consumption in buildings. Fique is a very important crop in Colombia. In order to contribute to our knowledge of the properties of its fibers as a thermal insulator, the measurement of its thermal conductivity is reported herein, employing equipment designed according to the ASTM C 177 standard and a kinetic study of its thermal decomposition from thermogravimetric data through the Coats–Redfern model-fitting method.

scholarly journals Microstructure Dependence of Effective Thermal Conductivity of EB-PVD TBCs

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1838
Author(s):  
Shi-Yi Qiu ◽  
Chen-Wu Wu ◽  
Chen-Guang Huang ◽  
Yue Ma ◽  
Hong-Bo Guo
Keyword(s):  
Thermal Conductivity ◽  
Mechanical Stress ◽  
Effective Thermal Conductivity ◽  
Thermal Insulation ◽  
Inclination Angle ◽  
Physical Vapor Deposition ◽  
Thermal Contact ◽  
Mathematic Model ◽  
Columnar Structure ◽  
Structural Parameter

Microstructure dependence of effective thermal conductivity of the coating was investigated to optimize the thermal insulation of columnar structure electron beam physical vapor deposition (EB-PVD coating), considering constraints by mechanical stress. First, a three-dimensional finite element model of multiple columnar structure was established to involve thermal contact resistance across the interfaces between the adjacent columnar structures. Then, the mathematical formula of each structural parameter was derived to demonstrate the numerical outcome and predict the effective thermal conductivity. After that, the heat conduction characteristics of the columnar structured coating was analyzed to reveal the dependence of the effective thermal conductivity of the thermal barrier coatings (TBCs) on its microstructure characteristics, including the column diameter, the thickness of coating, the ratio of the height of fine column to coarse column and the inclination angle of columns. Finally, the influence of each microstructural parameter on the mechanical stress of the TBCs was studied by a mathematic model, and the optimization of the inclination angle was proposed, considering the thermal insulation and mechanical stress of the coating.

Measurement of apparent thermal conductivity of regenerator materials in 4-20 K temperature range

Cryogenics ◽  
2021 ◽  
pp. 103300
Author(s):  
Yang Biao ◽  
Xi Xiaotong ◽  
Liu Xuming ◽  
Xu Xiafan ◽  
Chen Liubiao ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Temperature Range ◽  
Apparent Thermal Conductivity

Effects of Nb doping on thermoelectric properties of Zn4Sb3 at high temperatures

2009 ◽  
Vol 24 (2) ◽  
pp. 430-435 ◽  
Author(s):  
D. Li ◽  
H.H. Hng ◽  
J. Ma ◽  
X.Y. Qin
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
High Temperatures ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Thermoelectric Performance ◽  
Temperature Range ◽  
A Value ◽  
Nb Doping ◽  
Thermal Conductivities

The thermoelectric properties of Nb-doped Zn4Sb3 compounds, (Zn1–xNbx)4Sb3 (x = 0, 0.005, and 0.01), were investigated at temperatures ranging from 300 to 685 K. The results showed that by substituting Zn with Nb, the thermal conductivities of all the Nb-doped compounds were lower than that of the pristine β-Zn4Sb3. Among the compounds studied, the lightly substituted (Zn0.995Nb0.005)4Sb3 compound exhibited the best thermoelectric performance due to the improvement in both its electrical resistivity and thermal conductivity. Its figure of merit, ZT, was greater than the undoped Zn4Sb3 compound for the temperature range investigated. In particular, the ZT of (Zn0.995Nb0.005)4Sb3 reached a value of 1.1 at 680 K, which was 69% greater than that of the undoped Zn4Sb3 obtained in this study.

ON MEASUREMENT OF THERMAL CONDUCTIVITY AT HIGH TEMPERATURES

1961 ◽  
Vol 39 (7) ◽  
pp. 1029-1039 ◽  
Author(s):  
M. J. Laubitz
Keyword(s):  
Thermal Conductivity ◽  
Heat Flow ◽  
High Temperatures ◽  
Mathematical Analysis ◽  
Temperature Range ◽  
Linear Heat ◽  
Flow Systems

A method is given for exact mathematical analysis of linear heat flow systems used in measuring thermal conductivity at high temperatures. It is shown that a popular version of such a system is very sensitive to the alignment of its components, which seriously limits the temperature range of its satisfactory use.

Bio-based Polyurethane-clay Nanocomposite Foams: Systheses and Properties

2009 ◽  
Vol 1188 ◽  
Author(s):  
Min Liu ◽  
Zoran S. Petrovic ◽  
Yijin Xu
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Cell Structure ◽  
Polyurethane Foams ◽  
Mechanical And Thermal Properties ◽  
Cell Content ◽  
Modified Clay ◽  
Rigid Polyurethane Foams ◽  
Nanocomposite Foams ◽  
Organically Modified

AbstractStarting from a bio-based polyol through modification of soybean oil, BIOH™ X-210, two series of bio-based polyurethanes-clay nanocomposite foams have been prepared. The effects of organically-modified clay types and loadings on foam morphology, cell structure, and the mechanical and thermal properties of these bio-based polyurethanes-clay nanocomposite foams have been studied with optical microscopy, compression test, thermal conductivity, DMA and TGA characterization. Density of nanocomposite foams decreases with the increase of clay loadings, while reduced 10% compressive stress and yield stress keep constant up to 2.5% clay loading in polyol. The friability of rigid polyurethane-clay nanocomposite foams is high than that of foam without clay, and the friability for nanofoams from Cloisite® 10A is higher than that from 30B at the same clay loadings. The incorporation of clay nanoplatelets decreases the cell size in nanocomposite foams, meanwhile increases the cell density; which would be helpful in terms of improving thermal insulation properties. All the nanocomposite foams were characterized by increased closed cell content compared with the control foam from X-210 without clay, suggesting the potential to improve thermal insulation of rigid polyurethane foams by utilizing organically modified clay. Incorporation of clay into rigid polyurethane foams results in the increase in glass transition temperature: the Tg increased from 186 to 197 to 204 °C when 30B concentration in X-210 increased from 0 to 0.5 to 2.5%, respectively. Even though the thermal conductivity of nanocomposite foams from 30B is lower than or equal to that of rigid polyurethane control foam from X-210, thermal conductivity of nanocomposite foams from 10A is higher than that of control at all 10A concentrations. The reason for this abnormal phenomenon is not clear at this moment; investigation on this is on progress.

Thermal Conductivity and Prandtl Number of Carbon Dioxide and Carbon-Dioxide Air Mixtures at One Atmosphere

1961 ◽  
Vol 83 (2) ◽  
pp. 125-131 ◽  
Author(s):  
Jerome L. Novotny ◽  
Thomas F. Irvine
Keyword(s):  
Carbon Dioxide ◽  
Thermal Conductivity ◽  
Prandtl Number ◽  
Maximum Error ◽  
Intermolecular Force ◽  
Temperature Range ◽  
Average Temperature ◽  
Pure Carbon ◽  
Prandtl Numbers ◽  
Pure Carbon Dioxide

By measuring laminar recovery factors in a high velocity gas stream, experimental determinations were made of the Prandtl number of carbon dioxide over a temperature range from 285 to 450 K and of carbon-dioxide air mixtures at an average temperature of 285 K with a predicted maximum error of 1.5 per cent. Thermal conductivity values were deduced from these Prandtl numbers and compared with literature values measured by other methods. Using intermolecular force constants determined from literature experimental data, viscosities, thermal conductivities, and Prandtl numbers were calculated for carbon-dioxide air mixtures over the temperature range 200 to 1500 deg for mixture ratios from pure air to pure carbon dioxide.

Sign in / Sign up

Export Citation Format

Share Document