An Evaluation of the Influence of UHMWPE Test Block Design on the Mechanical Performance of Bilateral Lumbar Corpectomy Constructs

2008 ◽  
pp. 209-209-8
Author(s):  
WL Dunbar ◽  
D Cesarone ◽  
H Serhan
Keyword(s):  
Mechanical Performance ◽  
Block Design ◽  
Test Block ◽  
Lumbar Corpectomy

Optimal Test Assembly in Practice

2013 ◽  
Vol 221 (3) ◽  
pp. 190-200 ◽  
Author(s):  
Jörg-Tobias Kuhn ◽  
Thomas Kiefer
Keyword(s):  
Particle Physics ◽  
Large Scale ◽  
Block Design ◽  
Linear Optimization ◽  
Mixed Integer ◽  
Optimal Test ◽  
Automated Test Assembly ◽  
Test Assembly ◽  
Block Level ◽  
Mixed Integer Linear Optimization

Several techniques have been developed in recent years to generate optimal large-scale assessments (LSAs) of student achievement. These techniques often represent a blend of procedures from such diverse fields as experimental design, combinatorial optimization, particle physics, or neural networks. However, despite the theoretical advances in the field, there still exists a surprising scarcity of well-documented test designs in which all factors that have guided design decisions are explicitly and clearly communicated. This paper therefore has two goals. First, a brief summary of relevant key terms, as well as experimental designs and automated test assembly routines in LSA, is given. Second, conceptual and methodological steps in designing the assessment of the Austrian educational standards in mathematics are described in detail. The test design was generated using a two-step procedure, starting at the item block level and continuing at the item level. Initially, a partially balanced incomplete item block design was generated using simulated annealing, whereas in a second step, items were assigned to the item blocks using mixed-integer linear optimization in combination with a shadow-test approach.

Innovation of Natural Preservation of Mackerel (Rastrelliger kanagurta) Using Coconut Coconut Ashes with Drying Time Variations on Hedonics

2020 ◽  
Vol 2 (2) ◽  
Author(s):  
Rika Agustina ◽  
Rita Sunartaty ◽  
Teuku Makmur
Keyword(s):  
Research Design ◽  
Block Design ◽  
Drying Time ◽  
Basic Ingredient ◽  
Randomized Block Design ◽  
Salt Substitute ◽  
Long Time ◽  
Time Variations ◽  
Rastrelliger Kanagurta

Coconut frond ash is one of the wastes from coconut trees which has not been maximally utilized. Coconut frond ash contains MgCl2 and KCl so that it can be used as a salt substitute in the process of preserving fish. In this study coconut frond ash was used as a basic ingredient for making dried mackerel with a long time of drying to storage. The purpose of this study was to determine the effect of drying time on mackerel storage. The research design used was a Randomized Block Design (RCBD) with 2 factors studied. The first factor is the drying time consists of 3 levels, namely P1 = 3 days, P2 = 4 days, P3 = 5 days. The second factor is storage which consists of 3 levels, namely S1 = 30 days, S2 = 60 days, S3 = 90 days. Each treatment was repeated 2 times to obtain 18 experimental units to observed hedonic tests. From the results of the study it can be stated that the treatment has a very significant effect (P≥0.01) on the hedonic test which includes (color, aroma, taste and texture).

DISTRIBUSI DAN IDENTIFIKASI POPULASI SINTRONG (Crossocephalum crepidiodes.Benth) RESISTEN PARAKUAT PADA LAHAN JAGUNG (Zea mays) DI KABUPATEN DAIRI

2017 ◽  
Vol 4 (2) ◽  
pp. 149-161
Author(s):  
Berton Sianturi
Keyword(s):  
Zea Mays ◽  
Dose Response ◽  
High Resistance ◽  
Block Design ◽  
Recommended Dose ◽  
Second Step ◽  
Resistance Level ◽  
Susceptible Population ◽  
Randomized Complete Block Design ◽  
Susceptible Populations

Crassocephalum crepidioides on Cornfields in Dairi Regency had been reported tobecome more difficult to control using paraquat. The objective of the research was todetermine the characteristics and the distribution of C.crepidioides resistant to paraquatin cornfields. The experiment was carried out in two steps, the first step was screeningthe population of C. crepidioides with paraquat at the recommended dose, and the secondstep, dose-response experiment for the resistance level of C. crepidioides population withdose 0, 76, 152, 304,5, 609, 1218, and 2436 g.ai /ha. In the first step experiment, paraquatdichloride was applied at 280 g.ai/ha. The treatments were arranged in a randomized blockdesign with 3 replication. The second step experiment was that the resistant populationsconfirmed in the first experiment were sprayed for their dose-response. The treatmentswere arranged in a randomized complete block design (CRBD). The results showed thatof 30 populations of C. crepidiodes, 19 populations (63.3%) were categorized to beresistant with the mortality ranging from 10.84% to 52.08%, and 11 populations (36.7%),was categorized as high resistance with mortality of 0% to 9.21%. The level ofresistance (R/S) of R-C25, R-C27, and R-C30 populations of C. crepidioides were 12,3,14,86, and 24,83 times consecutively, compared with the susceptible population. Thenumber of C. crepidioides chlorophyl leaves in susceptible populations was significantlylower than that of a resistant populations.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

Effect of Sunflower Residues and Herbicide on Weed Suppression, Grain Yield and Economics of Transplanted Aman Rice

2020 ◽  
Vol 23 (1) ◽  
pp. 47-58
Author(s):  
SS Tanu ◽  
P Biswas ◽  
S Ahmed ◽  
SC Samanta
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Block Design ◽  
Weed Suppression ◽  
Cost Ratio ◽  
Gross Margin ◽  
Weed Density ◽  
Benefit Cost Ratio ◽  
Hand Weeding ◽  
Environmentally Sound

A field experiment was conducted at Agronomy Field Laboratory, Patuakhali Science and Technology University, Dumki, Patuakhali from July 2018 to November 2018 to evaluate the effect of sunflower residues and herbicides on the yield and economic performance of transplanted Aman rice. Weed control methods tested were T1 = weedy check (Unweeded control), T2 = Weed-free check by hand weeding twice, T3 = Pendimethalin, T4 = Pretilachlor, T5 = Butachlor, T6 = Pyrazosulfuron ethyl, T7 = Bensulfuron methyl + Acetachlor, T8 = Bispyriback sodium, T9 = 2,4-D amine, T10 = MCPA, T11 = Sunflower residues, T12 = Sunflower residues + 100% Pyrazosulfuron ethyl, T13 = Sunflower residues + 75% Pyrazosulfuron ethyl, T14 = Sunflower residues + 50% Pyrazosulfuron ethyl. The experiment was laid out in a randomized complete block design with fourteen treatments replicated thrice. Weedy check registered significantly the highest total weed density (354.67 m-2) and total weed dry matter (51.81 g-2) while weed-free treatment by hand weeding twice recorded significantly the lowest total weed density (6.67 m-2) and total weed dry matter 0.49 g-2) . Weedy check produced the highest weed index (34.24%) and hand weeding produced the lowest. Among different herbicides applied alone, butachlor had the lowest total weed density (15 m-2) and total weed dry matter (6.43 g-2) after hand weeding. Hand weeding recorded the highest grain yield (5.14 t ha-1) which was statistically similar to pendimethalin, pretilachlor, butachlor, bensulfuron methyl + acetachlor and sunflower residues + 100% pyrazosulfuron ethyl. Higher grain yield was attributed to a higher number of panicle m-2, number of filled grains panicle-1 and 1000-grain weight. The highest gross margin (22955 Tk. ha-1) and benefit-cost ratio (1.32) were obtained from butachlor. Integration of sunflower residues with pyrazosulfuron ethyl produced effective weed suppression and satisfactory yield comparable to butachlor. Although the integration is less profitable than butachlor the farmers can use this technology as a feasible and environmentally sound approach in transplanted Aman rice field. Bangladesh Agron. J. 2020, 23(1): 47-58

The Mechanical Performance of Carbon Fibres- Addressing the Role of Microstructure

2019 ◽  
Author(s):  
Peter Peter ◽  
Claudia Creighton ◽  
David Fox ◽  
Pablo Mota Santiago ◽  
Adrian Hawley ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Carbon Fibres

Kualitas Semen Cair Kambing Boer Berbahan Pengencer Air Kelapa Muda Varietas Viridis Setelah Simpan Dingin

2019 ◽  
Vol 6 (1) ◽  
pp. 78
Author(s):  
Muhammad Ade Salim ◽  
Muhammad Nur Ihsan ◽  
Nur Isnaini ◽  
Trinil Susilawati
Keyword(s):  
Semen Quality ◽  
Block Design ◽  
Animal Husbandry ◽  
Egg Yolk ◽  
Coconut Water ◽  
Boer Goat ◽  
Randomized Block Design ◽  
Frozen Semen ◽  
Artificial Vagina

ABSTRAKAir kelapa muda varietas viridisdapat dijadikan pengencer aletrnatif semen cair bagi program IB di daerah minim sarana semen beku. Tujuan penelitian ini untuk menguji pengaruh penggunaan air kelapa muda viridissebagai bahan pengencer terhadap kualitas semen cair kambing Boer setelah didinginkan. Dilaksanakanselama 3 bulan di Laboratorium Fakultas Peternakan UBUnit SumberSekar,Malang. Metodenya yaitu eksperimen. Semen dari  3 pejantan Boer umur 3-5 tahun, dikoleksi seminggu sekali dengan VB. Air kelapa mudaviridis umur 5-7 bulan serta tris aminomethane sebagai kontrol. Didesain menggunakan Rancangan Acak Kelompok (RAK) dengan 2 perlakuan yaitu P0 (tris aminomethane + 10% KT) dan  P1 (air kelapa muda viridis + 10% KT) masing-masing diulang 10 kali. Data dianalisis dengan analisis Ragam (Anova) dengan software Genstat 18. Variabelnya yaitu motilitas individu, viabilitas dan abnormalitas. Hasil penelitian yaitu motilitas individu pada P1bertahan sampai 4 hari (40,5± 24,3%), viabilitas terbaik sampai hari ke-5 (42±24,6%), abnormalitas terendah di hari ke-7(1,31± 0,6). Kesimpulannya, Pengencer air kelapa muda viridis dapat mempertahankan kualitas semen cair kambing Boer selama 4 hari untuk motilitas dan 5 hari untuk viabilitas.Kata Kunci:pengencer, air kelapa, varietas viridisABSTRACTYoung viridis coconut water could be used as an alternative to liquid semen diluent for artificial insemination program in the area with limited facility for frozen semen production. This study evaluated the use of young coconut water as a diluent on liquid semen quality of Boer goat after cold storage. This study was carried out for 3 months at Sumber Sekar Laboratory, Faculty of Animal Husbandry, University of Brawijaya, Malang. The semen was collected from 3 Boer bucks aged at 3 to 5 years old. The semen collection was done once a week with the aid of artificial vagina. The diluents used were young Viridis coconut (5 to 7 months old) and tris aminomethane. The method used was an experiment in a randomized block design with 2 treatments and 10 replicates. The treatments used were T0: tris aminomethane + 10% egg yolk (control) and T1:  young Viridis coconut water + 10% egg yolk. Data were analyzed by analysis of variance using Genstat 18 software. The variables measured were sperm individual motility, viability, and abnormality. The results showed that the sperm individual motility in T1 survived up to 4 days (40.5± 24.3%), the best viability at 5 days (42.0±24.6%),  while the lowest abnormality at 7 days (1.31±0.6). It could be concluded that: 1. Tris aminomethane diluent has higher quality with the storage length up to 9 days, 2. Young Viridis coconut water diluent could preserve liquid semen quality of Boer goat up to 4 days for sperm motility and 5 days for sperm viability.Keywords: diluents, coconut water, viridis variety

ESTIMATION OF CONSUMPTIVE USE OF POTATO CROP PIANTED UNDER DRIP IRRIGATION SYSTEM BY USING SWRT TECHNOLOGY

2020 ◽  
Vol 10 (1) ◽  
pp. 271-282
Author(s):  
J.N. Abedalrahman ◽  
R.J. Mansor ◽  
D.R. Abass
Keyword(s):  
Water Consumption ◽  
Drip Irrigation ◽  
Soil Depth ◽  
Irrigation System ◽  
Potato Crop ◽  
Block Design ◽  
Organic Fertilizer ◽  
Control Treatment ◽  
Drip Irrigation System ◽  
Spring Season

A field experiment was carried out in the field of the College of Agriculture / University of Wasit, located on longitude  45o   50o   33.5o   East and latitude 32o 29o 49.8o North, in Spring season of the agricultural season 2019, in order to estimate the water consumption of potato crop using SWRT technology and under the drip irrigation system. The experiment was designed according to Randomized Complete Block Design (RCBD) with three replications and four treatments that include of the SWRT treatment (the use of plastic films under the plant root area in an engineering style), and the treatment of vegetal fertilizer (using Petmos), organic fertilizer (sheep manure), and the control treatment . Potato tubers (Solanum tuberosum L.)  var. Burin was planted for spring season on 10/2/2019 at the soil depth of 5-10 cm. The highest reference water consumption for the potato crop during the season was calculated by Najeeb Kharufa, which was 663.03 mm. The highest actual water consumption for the potato crop during the season for the control treatment was 410.1 mm. The results showed increase in the values of the crop coefficient (Kc) in the stages of tubers formation and tubers filling stage as compared to the vegetative and ripening stages, ranged from 1.37-1.92 for the two stages of tubers formation and tubers filling. The SWRT treatment gave the highest water use efficiency during the season, was 3.46 kg m-3 .

Effect of Urea and Nano-Nitrogen Fertigation and Foliar Application of Nano-Boron and Molybdenum on some Growth and Yield Parameters of Potato

2020 ◽  
Vol 10 (1) ◽  
pp. 253-263
Author(s):  
Hayyawi W.A. Al-juthery ◽  
Estabraq Hilal Obaid Al-Maamouri
Keyword(s):  
Foliar Application ◽  
Growth Traits ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Growth And Yield ◽  
Control Treatment ◽  
Acid Yield ◽  
Biological Yield ◽  
Starch Yield ◽  
Private Farm

Investigating the effect of urea and nano-nitrogen fertigation and foliar application of nano B and Mo on growth and yield of potato Solanum tuberosum L. [Rivera-A]. The study was conducted in a private farm located in the Al-Taleah area - Babylon governorate. The experiment consisted of (12) treatments consisting of separated fertigation of nano nitrogen (25% N) and urea (46% N), single treatments of leaf spraying of nano Mo (5%), Nano B (9%), nano-binary combinations (Mo+B) and (U+ Nano Mo), (U+Nano B), Nano (N+Mo), Nano (N+B), and tricombination treatments of (U+Mo+B), Nano (N+Mo+B) additional to the control treatment. Randomize Complete Block Design (RCBD) and one way simple experiment with three replicates. Fertilizers were applied at levels of 40 liters h-1 of Nano-N fertilizer (25% N) and 300 kg h-1 urea fertilizer (46% N). They were sprayed early in the morning after (40) days after planting four times. Two weeks is the period between an application and another according to the recommendation of (1) kg  h-1 nano-fertilizer of (B) and (500) g h-1 of  Mo. Fertilizers were injected and sprayed at (10, 20, 30 and 40)% of the total amount of the fertilizer were applied as the first, second, third and fourth applications, respectively. Some growth traits were tested including the chlorophyll content in the leaves, the total dry vegetative yild, the soft tubers yield, and the biological yield, proteins and ascorbic acid yield compared to the control (spray water only). The results of the Duncan test showed a significant increase in most of the studied traits of nano-tricombination (N+Mo+B) in the fresh tubers yield,  dry vegetative yield  , the biological yield, starch yield ,the total protein and ascorbic yield (37.53, 1.799, 8.138,4.152 , 481.3and 653.8 meg ha-1) respectively .compare to control (21.58 , 0.890, 4.463  ,2.323 , 366.1 and 215.5 meg ha-1) respectively.

Sign in / Sign up

Export Citation Format

Share Document