Novel Polymeric Dispersants for Water Dispersible Granules

2008 ◽  
pp. 125-125-11
Author(s):  
R Herbert
Keyword(s):  
Water Dispersible

Cellular Uptake and Magneto-Hyperthermia Induced Cytotoxicity using Photoluminescent Fe3O4 Nanoparticle/Si Quantum Dot Hybrids

2020 ◽  
Author(s):  
Morteza Javadi ◽  
Van A. Ortega ◽  
Alyxandra Thiessen ◽  
Maryam Aghajamali ◽  
Muhammad Amirul Islam ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Biomedical Applications ◽  
Short Term ◽  
Water Dispersible ◽  
Optical Responses ◽  
Si Quantum Dot ◽  
Real World Applications ◽  
Potential Benefits ◽  
Low Toxicity ◽  
Si Quantum Dots

<p>The design and fabrication of Si-based multi-functional nanomaterials for biological and biomedical applications is an active area of research. The potential benefits of using Si-based nanomaterials are not only due to their size/surface-dependent optical responses but also the high biocompatibility and low-toxicity of silicon itself. Combining these characteristics with the magnetic properties of Fe<sub>3</sub>O<sub>4</sub> nanoparticles (NPs) multiplies the options available for real-world applications. In the current study, biocompatible magnetofluorescent nano-hybrids have been prepared by covalent linking of Si quantum dots to water-dispersible Fe<sub>3</sub>O<sub>4</sub> NPs <i>via</i> dicyclohexylcarbodiimide (DCC) coupling. We explore some of the properties of these magnetofluorescent nano-hybrids as well as evaluate uptake, the potential for cellular toxicity, and the induction of acute cellular oxidative stress in a mast cells-like cell line (RBL-2H3) by heat induction through short-term radio frequency modulation (10 min @ 156 kHz, 500 A). We found that the NPs were internalized readily by the cells and also penetrated the nuclear membrane. Radio frequency activated nano-hybrids also had significantly increased cell death where > 50% of the RBL-2H3 cells were found to be in an apoptotic or necrotic state, and that this was attributable to increased triggering of oxidative cell stress mechanisms. </p>

scholarly journals Highly Water Dispersible Functionalized Graphene by Thermal Thiol-Ene Click Chemistry

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2830
Author(s):  
Farzaneh Farivar ◽  
Pei Lay Yap ◽  
Tran Thanh Tung ◽  
Dusan Losic
Keyword(s):  
Click Reaction ◽  
High Water ◽  
Pristine Graphene ◽  
Functionalized Graphene ◽  
Specific Chemical ◽  
Simple Modification ◽  
Water Dispersible ◽  
Chemical Hazards ◽  
Water Dispersibility ◽  
C And N

Functionalization of pristine graphene to achieve high water dispersibility remains as a key obstacle owing to the high hydrophobicity and absence of reactive functional groups on the graphene surface. Herein, a green and simple modification approach to prepare highly dispersible functionalized graphene via thermal thiol-ene click reaction was successfully demonstrated on pristine graphene. Specific chemical functionalities (–COO, –NH2 and –S) on the thiol precursor (L-cysteine ethyl ester) were clicked directly on the sp2 carbon of graphene framework with grafting density of 1 unit L-cysteine per 113 carbon atoms on graphene. This functionalized graphene was confirmed with high atomic content of S (4.79 at % S) as well as the presence of C–S–C and N–H species on the L-cysteine functionalized graphene (FG-CYS). Raman spectroscopy evidently corroborated the modification of graphene to FG-CYS with an increased intensity ratio of D and G band, ID/IG ratio (0.3 to 0.7), full-width at half-maximum of G band, FWHM [G] (20.3 to 35.5) and FWHM [2D] (64.8 to 90.1). The use of ethanol as the reaction solvent instead of common organic solvents minimizes the chemical hazards exposure to humans and the environment. This direct attachment of multifunctional groups on the surface of pristine graphene is highly demanded for graphene ink formulations, coatings, adsorbents, sensors and supercapacitor applications.

Highly Water-Dispersible Fe3O4 Single Nanocrystals: Gram-Scale Preparation by a Solution-Phase Route and Application for the Absorption of Cd2+ in Water

ChemPlusChem ◽  
2011 ◽  
Vol 77 (1) ◽  
pp. 56-60 ◽  
Author(s):  
Xiao-Hui Guan ◽  
Bo-Tian Zheng ◽  
Min Lu ◽  
Xin Guan ◽  
Guang-Sheng Wang ◽  
...  
Keyword(s):  
Solution Phase ◽  
Water Dispersible ◽  
Scale Preparation

Water-dispersible polyphosphate-grafted Fe3O4 nanomagnets for cancer therapy

RSC Advances ◽  
2015 ◽  
Vol 5 (105) ◽  
pp. 86754-86762 ◽  
Author(s):  
Jerina Majeed ◽  
K. C. Barick ◽  
Neena G. Shetake ◽  
B. N. Pandey ◽  
P. A. Hassan ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Cancer Therapy ◽  
Water Dispersible ◽  
Drug Delivery Applications

Development of water-dispersible polyphosphate-grafted Fe3O4 nanomagnets for hyperthermia and drug delivery applications.

Synthesis of water-dispersible Ti3C2Tz MXene nanosheets by molten salt etching

2021 ◽  
Author(s):  
Kailash Arole ◽  
Jackson Bilvin ◽  
Sanjit Saha ◽  
Micah Green ◽  
Miladin Radovic ◽  
...  
Keyword(s):  
Molten Salt ◽  
Water Dispersible

scholarly journals Water-dispersible clay in soils treated with sewage sludge

2010 ◽  
Vol 34 (5) ◽  
pp. 1527-1534 ◽  
Author(s):  
João Tavares Filho ◽  
Graziela Moraes de Césare Barbosa ◽  
Adriana Aparecida Ribon
Keyword(s):  
Sewage Sludge ◽  
Block Design ◽  
Clay Fraction ◽  
Organic Matter Content ◽  
Soil Samples ◽  
Point Of Zero Charge ◽  
Native Forest ◽  
Water Dispersible ◽  
Significant Difference ◽  
Dispersible Clay

A by-product of Wastewater Treatment Stations is sewage sludge. By treatment and processing, the sludge is made suitable for rational and environmentally safe use in agriculture. The aim of this study was to assess the influence of different doses of limed sewage sludge (50 %) on clay dispersion in soil samples with different textures (clayey and medium). The study was conducted with soil samples collected from native forest, on a Red Latosol (Brazilian classification: Latossolo Vermelho distroférrico) loamy soil in Londrina (PR) and a Red-Yellow Latosol (BC: Latossolo Vermelho-Amarelo distrófico) medium texture soil in Jaguapitã (PR). Pots were filled with 3 kg of air-dried fine earth and kept in greenhouse. The experiment was arranged in a randomized block design with six treatments: T1 control, and treatments with limed sewage sludge (50 %) as follows: T2 (3 t ha-1), T3 (6 t ha-1), T4 (12 t ha-1), T5 (24 t ha-1) and T6 (48 t ha-1) and five replications. The incubation time was 180 days. At the end of this period, the pots were opened and two sub-samples per treatment collected to determine pH-H2O, pH KCl (1 mol L-1), organic matter content, water-dispersible clay, ΔpH (pH KCl - pH-H2O) and estimated PZC (point of zero charge): PZC = 2 pH KCl - pH-H2O, as well as the mineralogy of the clay fraction, determined by X ray diffraction. The results showed no significant difference in the average values for water-dispersible clay between the control and the other treatments for the two soil samples studied and ΔpH was the variable that correlated best with water-dispersible clay in both soils.

Sign in / Sign up

Export Citation Format

Share Document