Evaluation of Offshore In-Situ Vane Test Results

2009 ◽  
pp. 339-339-15 ◽  
Author(s):  
HJ Kolk ◽  
Jt Hoope ◽  
BW Ims
Keyword(s):  
Test Results

IoT Based Bus Tracking System

2021 ◽  
Vol 9 (VI) ◽  
pp. 2889-2893
Author(s):  
Miss Payal W. Paratpure
Keyword(s):  
Tracking System ◽  
Cost Effective ◽  
Raspberry Pi ◽  
Accurate Estimation ◽  
Time Of Arrival ◽  
Test Results ◽  
Cloud Server ◽  
Bus Operator ◽  
Gps Device

Tracking of public bus location requires a GPS device to be installed, and lots of bus operators in developing countries don't have such an answer in situ to supply an accurate estimation of bus time of arrival (ETA). Without ETA information, it's very difficult for the overall public to plan their journey effectively. In this paper, implementation of an innovative IOT solution to trace the real time location of buses without requiring the deployment of a GPS device is discussed. It uses Bluetooth Low Energy (BLE) proximity beacon to trace the journey of a bus by deploying an Estimate location beacon on the bus. BLE detection devices (Raspberry Pi 4) are installed at selected bus stops along the path to detect the arrival of buses. Once detected, the situation of the bus is submitted to a cloud server to compute the bus ETAs. A field trial is currently being conducted in Johor, Malaysia together with an area bus operator on one single path. Our test results showed that the detection of BLE beacons is extremely accurate and it's feasible to trace the situation of buses without employing a GPS device during a cost-effective way.

The Pittsburgh Cervical Cancer Screening Model: A Risk Assessment Tool

2010 ◽  
Vol 134 (5) ◽  
pp. 744-750
Author(s):  
R. Marshall Austin ◽  
Agnieszka Onisko ◽  
Marek J. Druzdzel
Keyword(s):  
Cervical Cancer ◽  
Cancer Screening ◽  
Cervical Cancer Screening ◽  
Disease Risk ◽  
Hpv Vaccination ◽  
Dynamic Bayesian Network ◽  
Adenocarcinoma In Situ ◽  
Test Results ◽  
Hpv Test

Abstract Context.—Evaluation of cervical cancer screening has grown increasingly complex with the introduction of human papillomavirus (HPV) vaccination and newer screening technologies approved by the US Food and Drug Administration. Objective.—To create a unique Pittsburgh Cervical Cancer Screening Model (PCCSM) that quantifies risk for histopathologic cervical precancer (cervical intraepithelial neoplasia [CIN] 2, CIN3, and adenocarcinoma in situ) and cervical cancer in an environment predominantly using newer screening technologies. Design.—The PCCSM is a dynamic Bayesian network consisting of 19 variables available in the laboratory information system, including patient history data (most recent HPV vaccination data), Papanicolaou test results, high-risk HPV results, procedure data, and histopathologic results. The model's graphic structure was based on the published literature. Results from 375 441 patient records from 2005 through 2008 were used to build and train the model. Additional data from 45 930 patients were used to test the model. Results.—The PCCSM compares risk quantitatively over time for histopathologically verifiable CIN2, CIN3, adenocarcinoma in situ, and cervical cancer in screened patients for each current cytology result category and for each HPV result. For each current cytology result, HPV test results affect risk; however, the degree of cytologic abnormality remains the largest positive predictor of risk. Prior history also alters the CIN2, CIN3, adenocarcinoma in situ, and cervical cancer risk for patients with common current cytology and HPV test results. The PCCSM can also generate negative risk projections, estimating the likelihood of the absence of histopathologic CIN2, CIN3, adenocarcinoma in situ, and cervical cancer in screened patients. Conclusions.—The PCCSM is a dynamic Bayesian network that computes quantitative cervical disease risk estimates for patients undergoing cervical screening. Continuously updatable with current system data, the PCCSM provides a new tool to monitor cervical disease risk in the evolving postvaccination era.

Syntax-Pragmatik-Schnittstelle am Beispiel der Fokussierung im Spanisch-Erwerb deutschsprachiger Lerner

2018 ◽  
Vol 69 (1) ◽  
pp. 315-350
Author(s):  
Julia Schirnhofer
Keyword(s):  
Native Speakers ◽  
Spanish Language ◽  
Test Results ◽  
L2 Acquisition ◽  
Proficiency Level ◽  
German Speaking ◽  
Syntactic Properties ◽  
Information Focus ◽  
Focus Marking

Abstract As a phenomenon at the syntax-pragmatics interface, focus marking can cause particular difficulties in adult L2 acquisition and may never be fully acquired, whereas native-like competence can be achieved with formal syntactic properties. The present study examines this so-called Interface Hypothesis by analysing the strategies that monolingual German-speaking learners use to mark information focus in Spanish. Analyses of the test results show that around 97 % of the test subjects prefer to maintain the unmarked constituent order and mark focus in situ, irrespective of their proficiency level. In comparison with Spanish natives (Gabriel 2010, Heidinger 2014), the results show a divergence from the behaviour of native speakers, as the latter use various strategies. This indicates that the German-speaking learners do not make use of the variation of focus marking strategies the Spanish language provides, but rather adhere to in situ focalization, which is also the dominant focus-marking strategy in German. Furthermore, the results of the present study highlight that strategies for marking focus are scarcely taken into account in language teaching classes.

Bond of Steel Bars to Masonry Mortar Joints: Test Results and Analytical Modelling

2017 ◽  
Vol 747 ◽  
pp. 319-325 ◽  
Author(s):  
Matteo Maragna ◽  
Cristina Gentilini ◽  
Giovanni Castellazzi ◽  
Christian Carloni
Keyword(s):  
High Strength ◽  
Experimental Tests ◽  
Analytical Investigation ◽  
Masonry Walls ◽  
Test Results ◽  
Bond Slip ◽  
Pull Out ◽  
Steel Bars ◽  
Masonry Mortar

In this paper, the preliminary results of a series of pull-out tests conducted on mortar cylinders with embedded bars are presented. The bars are made of high strength stainless steel and are of helical shape to increase mechanical interlocking with the surrounding mortar. Usually, such bars are employed in situ to realize structural repointing in the case of fair-faced masonry walls. To this aim, they are inserted in the mortar bed joints of masonry for providing tensile strength to the walls and with the function of crack stitching. The aim of the present experimental tests is to determine the bond-slip relationship for bars embedded in masonry. Firstly, pull-out tests are conducted on mortar cylinders considering different embedded lengths of the bars. Further tests are on-going on masonry specimens with bars embedded in the mortar joints. An analytical investigation is also carried out for the interpretation of the pull-out test results.

scholarly journals In-situ Desaturation Tests by Electrolysis for Liquefaction Mitigation

2021 ◽  
Author(s):  
Runze Chen ◽  
Yumin Chen ◽  
Hanlong Liu ◽  
Kunxian Zhang ◽  
Ying Zhou ◽  
...  
Keyword(s):  
Minimum Degree ◽  
Electricity Consumption ◽  
Potential Method ◽  
Economic Benefits ◽  
Degree Of Saturation ◽  
Test Results ◽  
Liquefaction Resistance ◽  
The Difference ◽  
Maximum And Minimum Degree

Electrolytic desaturation is a potential method for improving the liquefaction resistance of the liquefiable foundation by reducing the soil saturation. In this study, in-situ desaturation tests were performed to investigate the resistivity of soil at different depth and the water level of the foundation under different current. The test results show that at constant currents of 1 A (Ampere, unit of the direct current), 2 A and 3 A, the saturation of the treated foundation reached 87%, 83% and 80%. During the electrolysis process, the generated gas migrates vertically and horizontally under the influence of buoyancy and gas pressure. In the end of electrolysis, the gas inside the sand foundation basically migrates vertically only. The higher current intensity employed for electrolysis will affect the uniformity and stability of the gas. At constant currents of 1 A, 2 A and 3 A, the difference between the maximum and minimum degree of saturation in the treated foundation was 14%, 18% and 19%; and after electrolysis halted for 144 h, the saturation in the treated foundation was 90%, 85% and 87%. The electricity consumption analysis indicates that the desaturation method has excellent economic benefits in the treatment of saturated sand foundations.

Simulations of In-Situ Upgrading Process: Interpretation of Laboratory Experiments and Study of Field-Scale Test

SPE Journal ◽  
2019 ◽  
Vol 24 (06) ◽  
pp. 2711-2730
Author(s):  
A.. Perez–Perez ◽  
M.. Mujica Chacín ◽  
I.. Bogdanov ◽  
A.. Brisset ◽  
O.. Garnier
Keyword(s):  
Experimental Data ◽  
Numerical Model ◽  
Field Test ◽  
Energy Efficient ◽  
Computer Assisted ◽  
Solid Residue ◽  
Test Results ◽  
Field Scale ◽  
Scale Test

Summary In–situ upgrading (IU) is a promising method of improved viscous– and heavy–oil recovery. The IU process implies a reservoir heating up and exposure to a temperature higher than 300°C for a time period long enough to promote a series of chemical reactions. The pyrolysis reactions produce lighter oleic and gaseous components, while a solid residue remains underground. In this work, we developed a numerical model of IU using laboratory experience (kinetics measurements and core experiments) and validated the results by applying our model to an IU field–scale test published in the literature. Finally, we studied different operational conditions in a search for energy–efficient configurations. In this work, two types of IU experimental data are used from two vertical–tube experiments with Canadian bitumen cores (0.15 and 0.69 m). A general IU numerical model for the different experimental setups has been developed and compared with experimental data, using a commercial reservoir–simulator framework. This model is capable of representing the phase distribution of pseudocomponents, the thermal decomposition reactions of bitumen fractions, and the generation of gases and residue (solid) under thermal cracking conditions. Simulation results for the cores exposed to a temperature of 380°C and production pressure of 15 bar have shown that oil production (per pseudocomponent) and oil–sample quality were well–predicted by the model. Some differences in gas production and total solid residue were observed with respect to laboratory measurements. Computer–assisted history matching was performed using an uncertainty–analysis tool with the most–important model parameters. To better understand IU field–scale test results, the Shell Viking pilot (Peace River) was modeled and analyzed with the proposed IU model. The appropriate gridblock size was determined and the calculation time was reduced using the adaptive mesh–refinement (AMR) technique. The quality of products, the recovery efficiency, and the energy expenses obtained with our model were in good agreement with the field test results. In addition, the conversion results (upgraded oil, gas, and solid residue) from the experiments were compared with those obtained in the field test. Additional analysis was performed to identify energy–efficient configurations and to understand the role of some key variables (e.g., heating period and rate and the production pressure) in the global IU upgrading performance. We discuss these results, which illustrate and quantify the interplay between energy efficiency and productivity indicators.

scholarly journals In Situ Testing of Square Footing Resting on Geobelt-Reinforced Gravel Thin Cushion on Soft Silt

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Wei Zhang ◽  
David Du ◽  
Xiaohong Bai
Keyword(s):  
Pressure Distribution ◽  
Width Ratio ◽  
Test Results ◽  
In Situ Testing ◽  
Square Footing ◽  
Stress Diffusion ◽  
Loading Tests ◽  
Vertical Spacing ◽  
Saddle Shape

A series of in situ static loading tests of square footing were carried out on the geobelt-reinforced gravel cushion on soft silt. The reinforced gravel cushion was thin with the depth-to-width ratio of 0.2. A parameters study was conducted by considering the number of geobelt layers, the depth of the first geobelt layer beneath the footing, the vertical spacing between two geobelt layers, the linear density of reinforcement, and the material type of geobelt. The pressure distribution on bottom of the cushion was measured. The test results showed that the bearing capacity of reinforced gravel cushion was significantly larger than that of unreinforced gravel cushion, and the stress diffusion effect of reinforced gravel cushion was also more pronounced than that of the unreinforced cushion. The pressure distribution on bottom of reinforced gravel cushion was in a saddle shape. According to calculation and analysis, the stress diffusion angles of reinforced cushions were all larger than 20°.

scholarly journals Dilation of Ti-6Al-4V/HA Composite Tensile Parts

2002 ◽  
Vol 11 (2) ◽  
pp. 096369350201100
Author(s):  
E. S. Thian ◽  
N. H. Loh ◽  
K. A. Khor ◽  
S. B. Tor
Keyword(s):  
Heating Rate ◽  
Sintering Temperature ◽  
Holding Time ◽  
Test Results ◽  
Basic Information ◽  
Sintering Process ◽  
Densification Rate ◽  
In Situ Test ◽  
Temperature Heating

Prior to the actual sintering process, a dilatometry study is performed to provide basic information and guidelines. This paper studies the effects of three sintering factors: sintering temperature, heating rate and holding time, on the densification rate of Ti-6Al-4V/HA composite parts. According to the in-situ test results, suitable values for the sintering factors can then be established.

Sign in / Sign up

Export Citation Format

Share Document