Simulative Performance Test for Hot Mix Asphalt Using Asphalt Pavement Analyzer

2006 ◽  
Vol 3 (5) ◽  
pp. 12255 ◽  
Author(s):  
PS Kandhal ◽  
LA Cooley
Keyword(s):  
Performance Test ◽  
Hot Mix Asphalt ◽  
Asphalt Pavement

Influence of Reclaimed Asphalt Pavement on Performance-Related Properties of Gap-Graded Rubberized Hot-Mix Asphalt

2017 ◽  
Vol 2633 (1) ◽  
pp. 80-89 ◽  
Author(s):  
Shawn S. Hung ◽  
Mohammad Zia Alavi ◽  
David Jones ◽  
John T. Harvey
Keyword(s):  
Performance Test ◽  
Hot Mix Asphalt ◽  
Asphalt Pavement ◽  
Environmental Benefits ◽  
Reclaimed Asphalt Pavement ◽  
Fine Aggregate ◽  
Reflective Cracking ◽  
Cracking Resistance ◽  
California Department ◽  
Reclaimed Asphalt

Rubberized hot-mix asphalt (RHMA) has been widely used in construction projects by the California Department of Transportation (Caltrans) for the environmental benefits of its recycled waste tires and for its improved fatigue and reflective cracking resistance. Currently, Caltrans does not permit the use of reclaimed asphalt pavement (RAP) in any gap- or open-graded rubberized asphalt mixes. However, given the cost and environmental benefits of RAP to replace portions of required virgin binder and aggregates in conventional mixes, interest is growing in the addition of some RAP to RHMA mixes as well. This study investigated concerns about this proposed practice. Three phases of laboratory testing (i.e., asphalt binder testing, fine aggregate matrix mix testing, and full-graded mix testing) were conducted to evaluate the effects of the addition of RAP into new RHMA mixes. The results indicated that the gap-graded aggregate structure of RHMA might limit the amount of RAP that could be used in the mix. Only 10% RAP by binder replacement could be achieved for the mix tested in this study, but the other specified volumetric requirements were still met. Replacement of a portion of asphalt rubber binder with age-hardened RAP binder increased the binder stiffness at low and high temperatures, which indicated enhanced rutting performance but diminished low-temperature cracking performance. Test results from full-graded mixes indicated similar trends, with improved rutting performance with the addition of RAP but also with significantly poorer fatigue and reflective cracking resistance.

scholarly journals Performance Evaluation of Hot Mix Asphalt with Different Proportions of RAP Content

2018 ◽  
Vol 34 ◽  
pp. 01026
Author(s):  
Ahmad Kamil Arshad ◽  
Haryati Awang ◽  
Ekarizan Shaffie ◽  
Wardati Hashim ◽  
Zanariah Abd Rahman
Keyword(s):  
Hot Mix Asphalt ◽  
Resilient Modulus ◽  
Design Method ◽  
Asphalt Pavement ◽  
Cost Savings ◽  
Volumetric Analysis ◽  
Public Works ◽  
Asphalt Binders ◽  
Moisture Susceptibility ◽  
Asphalt Mixes

Reclaimed Asphalt Pavement (RAP) is old asphalt pavement that has been removed from a road by milling or full depth removal. The use of RAP in hot mix asphalt (HMA) eliminates the need to dispose old asphalt pavements and conserves asphalt binders and aggregates, resulting in significant cost savings and benefits to society. This paper presents a study on HMA with different RAP proportions carried out to evaluate the volumetric properties and performance of asphalt mixes containing different proportions of RAP. Marshall Mix Design Method was used to produce control mix (0% RAP) and asphalt mixes containing 15% RAP, 25% RAP and 35% RAP in accordance with Specifications for Road Works of Public Works Department, Malaysia for AC14 dense graded asphalt gradation. Volumetric analysis was performed to ensure that the result is compliance with specification requirements. The resilient modulus test was performed to measure the stiffness of the mixes while the Modified Lottman test was conducted to evaluate the moisture susceptibility of these mixes. The Hamburg wheel tracking test was used to evaluate the rutting performance of these mixes. The results obtained showed that there were no substantial difference in Marshall Properties, moisture susceptibility, resilient modulus and rutting resistance between asphalt mixes with RAP and the control mix. The test results indicated that recycled mixes performed as good as the performance of conventional HMA in terms of moisture susceptibility and resilient modulus. It is recommended that further research be carried out for asphalt mixes containing more than 35% RAP material.

Performance-based mix design of unmodified and lime-modified hot mix asphalt

2012 ◽  
Vol 39 (7) ◽  
pp. 824-833 ◽  
Author(s):  
Sangyum Lee ◽  
Cheolmin Baek ◽  
Je-Jin Park
Keyword(s):  
Performance Test ◽  
Hot Mix Asphalt ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Mix Design ◽  
Direct Tension ◽  
Element Analysis ◽  
Asphalt Content ◽  
National Cooperative

This paper presents the performance evaluation of unmodified and lime-modified hot mix asphalt (HMA) mixtures at varying asphalt content using asphalt mixture performance test developed from National Cooperative Highway Research Program project 9-19 and 9-29 and the viscoelastic continuum damage finite element analysis. Test methods adopted in this study are the dynamic modulus test for stiffness, the triaxial repeated load permanent deformation test for rutting, and the direct tension test for fatigue cracking. The findings from this study support conventional understanding of the effects of asphalt content and lime modification on the fatigue cracking and rutting performance. Finally, the optimum asphalt content for both lime-modified and unmodified mixtures are proposed based on the knowledge gleaned from the performance-based mix design methodology. With additional validation and calibration, the comprehensive methodology described in this paper may serve as the foundation for a performance-based HMA mix design and performance-related HMA specifications.

Sign in / Sign up

Export Citation Format

Share Document