scholarly journals Closure to Discussion by K. Prakash and A. Sridharan of “Atterberg Limits and Remolded Shear Strength–Water Content Relationships” [Geotechnical Testing Journal, Vol. 36, No. 6, pp. 939–947]

2014 ◽  
Vol 37 (4) ◽  
pp. 20140041 ◽  
Author(s):  
Brendan C. O’Kelly
Keyword(s):  
Shear Strength ◽  
Water Content ◽  
Atterberg Limits ◽  
Geotechnical Testing

Shear strength of remolded soils at consistency limits

2010 ◽  
Vol 47 (3) ◽  
pp. 259-266 ◽  
Author(s):  
Kamil Kayabali ◽  
Osman Oguz Tufenkci
Keyword(s):  
Shear Strength ◽  
Linear Relationship ◽  
Water Content ◽  
Undrained Shear Strength ◽  
Liquid Limit ◽  
Soil Samples ◽  
Atterberg Limits ◽  
Plastic Limit ◽  
Water Contents ◽  
Undrained Shear

The undrained shear strength of remolded soils is of concern in certain geotechnical engineering applications. Several methods for determining this parameter exist, including the laboratory vane test. This study proposes a new method to estimate the undrained shear strength, particularly at the plastic and liquid limits. For 30 inorganic soil samples of different plasticity levels, we determined the Atterberg limits, then performed a series of reverse extrusion tests at different water contents. The plastic and liquid limits are derived from the linear relationship between the logarithm of the extrusion pressure and water content. The tests show that the average undrained shear strength determined from the extrusion pressures at the plastic limit is about 180 kPa, whereas the average undrained shear strength at the liquid limit is 2.3 kPa. We show that the undrained shear strength of remolded soils at any water content can be estimated from the Atterberg limits alone. Although the laboratory vane test provides a reasonable undrained shear strength value at the plastic limit, it overestimates the undrained shear strength at the liquid limit and thus, care must be taken when the laboratory vane test is used to determine undrained shear strengths at water contents near the liquid limit.

scholarly journals Investigation of the Atterberg limits and undrained fall-cone shear strength variation with water content of some peat soils

2019 ◽  
Vol 12 (2) ◽  
pp. 131-138 ◽  
Author(s):  
P. J. Vardanega ◽  
C. L. Hickey ◽  
K. Lau ◽  
H. D. L. Sarzier ◽  
C. M. Couturier ◽  
...  
Keyword(s):  
Shear Strength ◽  
Water Content ◽  
Atterberg Limits ◽  
Peat Soils ◽  
Strength Variation

Characterization of Shear Strength and Interface Friction of Organic Soil

2020 ◽  
Vol 857 ◽  
pp. 203-211
Author(s):  
Majid Hamed ◽  
Waleed S. Sidik ◽  
Hanifi Canakci ◽  
Fatih Celik ◽  
Romel N. Georgees
Keyword(s):  
Shear Stress ◽  
Shear Strength ◽  
Internal Friction ◽  
Moisture Content ◽  
Water Content ◽  
Friction Angle ◽  
Structural Materials ◽  
Organic Soil ◽  
Internal Friction Angle ◽  
Interface Friction

This study was undertaken to investigate some specific problems that limit a safe design and construction of structures on problematic soils. An experimental study was carried out to examine the influence of loading rate and moisture content on shear strength of organic soil. Influece of moisture content on interface friction between organic soil and structural materials was also attempted. A commonly used soil in Iraq was prepared at varying moisture contents of 39%, 57% and 75%. The experimental results showed that the increase in water content will decrease the shear stress and the internal friction angle. An increase of the shearing rate was found to decrease the shear stress and internal friction angle for all percetanges of water contents. Further, direct shear tests were carried out to detect the interface shear stress behavior between organic soil and structural materials. The results revealed that the increase in water content was shown to have significant negetavie effects on the interface internal friction and angle shear strength.

scholarly journals Shear strength characteristics of Jerash expansive soil

2021 ◽  
Vol 3 (2) ◽  
pp. 74-80
Author(s):  
Talal Masoud
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Water Content ◽  
Direct Shear Test ◽  
Shear Test ◽  
Expansive Soil ◽  
Content Increase ◽  
Direct Shear ◽  
Initial Water ◽  
Angle Of Internal Friction

The results of the direct shear test on Jerash expansive soil show the effect of the initial water content on the cohesion (c) and on the angel of internal friction ( ) [shear strength parameters].it show that, as the initial water increase, the cohesion (c) of Jerash expansive soil also increase up to the shrinkage limit, after that increase of water even small amount, decrease the cohesion of the soil. On the other hand, the results of direct shear test show also  that as the water content increase, the angle of internal friction ( )remain unchanged up to shrinkage limit , any increase of water cause a large decrease on the angle of internal friction of Jerash expansive soil.

Determination of the consistency limits of soils by the fall cone test

1986 ◽  
Vol 23 (2) ◽  
pp. 241-246 ◽  
Author(s):  
Y. Wasti ◽  
M. H. Bezirci
Keyword(s):  
Shear Strength ◽  
Key Words ◽  
Water Content ◽  
Strength Criterion ◽  
Undrained Shear Strength ◽  
Wide Range ◽  
Undrained Strength ◽  
Content Range ◽  
Undrained Shear

The liquid and plastic limits for a variety of natural and artificial soils covering a wide range of plasticity, as determined by the Casagrande method and the fall cone test and based on a strength criterion, were compared. To check the validity of the strength criterion, the undrained shear strength of these soils has been determined with a laboratory vane over the water content range between these limits. A limited comparison of the undrained strength values obtained from the vane test and fall cone test is also given. Key words: Atterberg limits, consistency, fall cone, laboratory vane, shear strength.

Studying the Geotechnical Properties of Clayey Soil Contaminated by Kerosene

2020 ◽  
Vol 857 ◽  
pp. 383-393
Author(s):  
Mahdi O. Karkush ◽  
Amer G. Jihad
Keyword(s):  
Shear Strength ◽  
Water Content ◽  
Contaminated Soil ◽  
Fine Particles ◽  
Clayey Soil ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Chemical Characteristics ◽  
Coefficient Of Consolidation ◽  
Plastic Containers

This study focuses on investigating the impacts of kerosene on the physical, mechanical, and chemical characteristics of clay soil. The soils specimens are contaminated artificially with six ratios of kerosene (5, 10, 20, 30, 40, and 50) % calculated according to the dry weight of soil. The artificial contamination includes air drying of the disturbed soil, then placed in plastic containers and mixed with the field water content and the specified concentration of kerosene to ensure getting homogenous contaminated soil specimens. The contaminated soil specimens left for 30 days in plastic containers covered by nylon sheets to control the water content and prevent volatility of contaminant. The results of tests proved that different ratios of kerosene have different impacts on the engineering and chemical characteristics of soil specimens. The specific gravity, percentages of fine particles, optimum water content, the initial and final void ratio, coefficient of consolidation, swelling index, permeability, the undrained shear strength, effective shear strength parameters, and the rate of reduction of initial pore water pressure are reduced significantly with increasing the content of kerosene in soil. Generally, the concentration of kerosene less than 10% has slight impacts on the studied characteristics of soil specimens.

Sign in / Sign up

Export Citation Format

Share Document