Test Method for Creep-Fatigue Testing

10.1520/e2714 ◽  
2013 ◽  
Author(s):  
Keyword(s):  
Fatigue Testing ◽  
Test Method ◽  
Creep Fatigue

scholarly journals Fatigue Strength Analysis of S34MnV Steel by Accelerated Staircase Test

2020 ◽  
Vol 10 (1) ◽  
pp. 394-400 ◽  
Author(s):  
I. M. W. Ekaputra ◽  
Rando Tungga Dewa ◽  
Gunawan Dwi Haryadi ◽  
Seon Jin Kim
Keyword(s):  
Standard Deviation ◽  
Fatigue Strength ◽  
Fatigue Limit ◽  
Fatigue Testing ◽  
Reliability Estimation ◽  
Test Method ◽  
Strength Analysis ◽  
Staircase Method ◽  
Staircase Test ◽  
Number Of Cycles

AbstractThis paper presents the reliability estimation of fatigue strength of the material used for crank throw components. The material used for crank throw components is forged S34MnV steel and subsequently heat-treated by normalising and tempering. High cycle fatigue testing under fully reversed cycling (R = −1) was performed to determine the fatigue limit of the material. The staircase test method is used to obtain accurate values of the mean fatigue limit stress until a number of cycles up to 1E7 cycles. Subsequently, the fatigue test results depend strongly on the stress step and are evaluated by the Dixon-Mood formula. The values of mean fatigue strength and standard deviation predicted by the staircase method are 282 MPa and 10.6MPa, respectively. Finally, the reliability of the design fatigue strength in some selected probability of failure is calculated. Results indicate that the fatigue strength determined from accelerated staircase test is consistent with conventional fatigue testing. Furthermore, the proposed method can be applied for the determination of fatigue strength and standard deviation for design optimisation of S34MnV steel.

scholarly journals Microstructure evolution of alloy 709 during static-aging and creep-fatigue testing

2021 ◽  
Vol 801 ◽  
pp. 140361
Author(s):  
T.D. Porter ◽  
Z. Wang ◽  
E.P. Gilbert ◽  
M.J. Kaufman ◽  
R.N. Wright ◽  
...  
Keyword(s):  
Microstructure Evolution ◽  
Fatigue Testing ◽  
Creep Fatigue

Estimation of Creep-Fatigue Damage Through Indentation Test Method

2011 ◽  
Author(s):  
Raghu V. Prakash
Keyword(s):  
Tensile Properties ◽  
Fatigue Damage ◽  
Indentation Test ◽  
Creep Damage ◽  
Test Method ◽  
Specimen Preparation ◽  
Creep Fatigue ◽  
Critical Components ◽  
The Cost

Creep, creep-fatigue damage is often estimated through in-situ metallography, tensile testing of specimens. However, these methods require specimen preparation which includes specimen extraction from critical components. Automated ball indentation testing has been used as an effective tool to determine the mechanical properties of metallic materials. In this work, the tensile properties of materials subjected to controlled levels of damage in creep, creep-fatigue is studied. It is found that the tensile properties such as yield strength and UTS deteriorates with creep damage, whereas the same specimens show an improved UTS values (at the cost of ductility) when subjected to creep-fatigue interactions.

Sign in / Sign up

Export Citation Format

Share Document