Test Method for Bulk Electrical Conductivity of Hardened Concrete

10.1520/c1760 ◽  
2015 ◽  
Author(s):  
Keyword(s):  
Electrical Conductivity ◽  
Test Method ◽  
Hardened Concrete ◽  
Bulk Electrical Conductivity

Electrical Conductivity of Agricultural Drainage Water in Iowa

2017 ◽  
Vol 33 (3) ◽  
pp. 369-378 ◽  
Author(s):  
Brett A Zimmerman ◽  
Amy L Kaleita
Keyword(s):  
Electrical Conductivity ◽  
Environmental Conditions ◽  
Major Ions ◽  
Ionic Composition ◽  
Field Investigation ◽  
Drainage Water ◽  
Specific Electrical Conductivity ◽  
Agricultural Drainage ◽  
Bulk Electrical Conductivity ◽  
Drainage Waters

Abstract. Assessing the effectiveness of management strategies to reduce agricultural nutrient efflux is hampered by the lack of affordable, continuous monitoring systems. Generalized water quality monitoring is possible using electrical conductivity. However environmental conditions can influence the ionic ratios, resulting in misinterpretations of established electrical conductivity and ionic composition relationships. Here we characterize specific electrical conductivity (k25) of agricultural drainage waters to define these environmental conditions and dissolved constituents that contribute to k25. A field investigation revealed that the magnitude of measured k25 varied from 370 to 760 µS cm-1. Statistical analysis indicated that variability in k25 was not correlated with drainage water pH, temperature, nor flow rate. While k25 was not significantly different among drainage waters from growing and post-growing season, significant results were observed for different cropping systems. Soybean plots in rotation with corn had significantly lower conductivities than those of corn plots in rotation with soybeans, continuous corn plots, and prairie plots. In addition to evaluating k25 variability, regression analysis was used to estimate the concentration of major ions in solution from measured k25. Regression results indicated that HCO3-, Ca2+, NO3-, Mg2+, Cl-, Na2+, SO42- were the major drainage constituents contributing to the bulk electrical conductivity. Calculated ionic molal conductivities of these analytes suggests that HCO3-, Ca2+, NO3-, and Mg2+ account for approximately 97% of the bulk electrical conductivity. Keywords: Electrical conductivity, Salinity, Subsurface drainage, Total dissolved solids.

scholarly journals Time-lapse cross-hole electrical resistivity tomography (CHERT) for monitoring seawater intrusion dynamics in a Mediterranean aquifer

2019 ◽  
Author(s):  
Andrea Palacios ◽  
Juan José Ledo ◽  
Niklas Linde ◽  
Linda Luquot ◽  
Fabian Bellmunt ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Electrical Resistivity ◽  
Seawater Intrusion ◽  
Electrical Resistivity Tomography ◽  
Low Cost ◽  
Heavy Rain ◽  
Time Lapse ◽  
Resistivity Tomography ◽  
Bulk Electrical Conductivity ◽  
Spatial Coverage

Abstract. Surface electrical resistivity tomography (ERT) is a widely used tool to study seawater intrusion (SWI). It is noninvasive and offers a high spatial coverage at a low cost, but it is strongly affected by decreasing resolution with depth. We conjecture that the use of CHERT (cross-hole ERT) can partly overcome these resolution limitations since the electrodes are placed at depth, which implies that the model resolution does not decrease in the zone of interest. The objective of this study is to evaluate the CHERT for imaging the SWI and monitoring its dynamics at the Argentona site, a well-instrumented field site of a coastal alluvial aquifer located 40 km NE of Barcelona. To do so, we installed permanent electrodes around boreholes attached to the PVC pipes to perform time-lapse monitoring of the SWI on a transect perpendicular to the coastline. After two years of monitoring, we observe variability of SWI at different time scales: (1) natural seasonal variations and aquifer salinization that we attribute to long-term drought and (2) short-term fluctuations due to sea storms or flooding in the nearby stream during heavy rain events. The spatial imaging of bulk electrical conductivity allows us to explain non-trivial salinity profiles in open boreholes (step-wise profiles really reflect the presence of fresh water at depth). By comparing CHERT results with traditional in situ measurements such as electrical conductivity of water samples and bulk electrical conductivity from induction logs, we conclude that CHERT is a reliable and cost-effective imaging tool for monitoring SWI dynamics.

scholarly journals Time-lapse cross-hole electrical resistivity tomography (CHERT) for monitoring seawater intrusion dynamics in a Mediterranean aquifer

2020 ◽  
Vol 24 (4) ◽  
pp. 2121-2139 ◽  
Author(s):  
Andrea Palacios ◽  
Juan José Ledo ◽  
Niklas Linde ◽  
Linda Luquot ◽  
Fabian Bellmunt ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Electrical Resistivity ◽  
Seawater Intrusion ◽  
Electrical Resistivity Tomography ◽  
Low Cost ◽  
Heavy Rain ◽  
Time Lapse ◽  
Resistivity Tomography ◽  
Bulk Electrical Conductivity ◽  
Spatial Coverage

Abstract. Surface electrical resistivity tomography (ERT) is a widely used tool to study seawater intrusion (SWI). It is noninvasive and offers a high spatial coverage at a low cost, but its imaging capabilities are strongly affected by decreasing resolution with depth. We conjecture that the use of CHERT (cross-hole ERT) can partly overcome these resolution limitations since the electrodes are placed at depth, which implies that the model resolution does not decrease at the depths of interest. The objective of this study is to test the CHERT for imaging the SWI and monitoring its dynamics at the Argentona site, a well-instrumented field site of a coastal alluvial aquifer located 40 km NE of Barcelona. To do so, we installed permanent electrodes around boreholes attached to the PVC pipes to perform time-lapse monitoring of the SWI on a transect perpendicular to the coastline. After 2 years of monitoring, we observe variability of SWI at different timescales: (1) natural seasonal variations and aquifer salinization that we attribute to long-term drought and (2) short-term fluctuations due to sea storms or flooding in the nearby stream during heavy rain events. The spatial imaging of bulk electrical conductivity allows us to explain non-monotonic salinity profiles in open boreholes (step-wise profiles really reflect the presence of freshwater at depth). By comparing CHERT results with traditional in situ measurements such as electrical conductivity of water samples and bulk electrical conductivity from induction logs, we conclude that CHERT is a reliable and cost-effective imaging tool for monitoring SWI dynamics.

scholarly journals The influence of an applied standard test method on a measurement of concrete stabilized secant modulus of elasticity

2018 ◽  
Vol 163 ◽  
pp. 07001
Author(s):  
Lucyna Domagała ◽  
Justyna Dobrowolska
Keyword(s):  
Modulus Of Elasticity ◽  
Lightweight Aggregate ◽  
Standard Test ◽  
Normal Weight ◽  
Test Method ◽  
Hardened Concrete ◽  
Secant Modulus ◽  
Testing Procedures ◽  
Standard Test Method ◽  
The Difference

The paper focuses on the influence of the standard test method applied to determine the concrete stabilized secant modulus on a specified value. The new European Standard EN 12390-13 for testing hardened concrete accepts two methods (A and B) for the determination of the secant modulus of elasticity in compression. The aim of the research was to establish how different testing procedures affect a measured value of modulus of elasticity. Four structural concrete series: two lightweight aggregate concretes and two normal-weight ones were subject to tests of moduli of elasticity determined by both standard methods, as well as compressive strength and density. The carried out tests revealed that the procedure of testing modulus of elasticity influenced a measured value. Method A led to higher values of modulus in relation to Method B, irrespective of concrete density and strength. Nevertheless, a certain relationship between the concrete structure homogeneity and the difference in results of moduli determined by both methods may be observed.

Sign in / Sign up

Export Citation Format

Share Document